Reviews Ag Series Cnc Plasma

uxcell Roll-in Spring M6 T Nut, Roll Ball Elastic Nuts for 4040 Series Aluminum Extrusion Profile, Pack of 12

  • Made from carbon steel,have high hardness, surface is Nickel-plated for good rust resistance..
  • Used for T-slot aluminum profile 40x40 series..
  • Easy to be roll into T slot of aluminum profile..
  • Package Content: 12 Pcs x 4040 Series M6 Roll Ball Elastic T-Nuts..
  • 4040 Series Aluminum Profile T-Nuts widely Use to build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Check Stock

1.5\ 5/16-18 T-Bolt, 5 Pack

  • M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
  • Metal Type：nickel plated , Carbon Steel.
  • 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check Stock

KOOTANS 4pcs 5 Hole 2020 Series L Shape Joining Plate Bracket Outside Right Angle Joint Board Connection Plate Corner Bracket for Standard 6mm T Slot Aluminum Extrusion Profile 3D Printer Frame

  • KOOTANS 2020 Series aluminum profile 5-hole 90 degree L shape outside joining plate, used to connect metric 20 series aluminum profiles..
  • Material: High quality aluminum alloy, used with M5 screws and M5 T-nuts..
  • 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, 3D carvers, CNC Routers, CNC laser cutters,CNC plasma cutters, Robotics Projects, etc..
  • Rigid connection, used to connect pieces of 20mm aluminum extrusion at a right angle..
  • Package include: 4pcs L shape aluminum outside joint plates..
Check Stock

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

PZRT 10pcs M6 x 20mm Hammer Head Bolt T Screw, 10pcs M6 Hexagon Flange nut Set, Carbon Steel Nickel Plated, for 3030 Series European Standard 8mm T-Slot Aluminum

  • 3030 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • M6 Hexagon Slip Locking Flange Nuts made from high quality carbon steel,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life.
  • Flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer,the serrations help in avoiding vibration of nut and increase the holding power of nut.
  • High Quality Carbon steel M6 x 20mm T Screw Bolt Screws Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.
  • T-shaped screws are used for aluminum profile design, suitable for standard 8mm T-slot 30 European standard aluminum profiles.
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

YESWELDER Plasma Cutter Torch Consumables, 24 Pcs Cutting Torch Nozzles Tips Kit For SG-55 AG-60 WSD-60.

  • HIGH QUALITY▶ Using high-quality materials, Provides premium strength and durability.
  • APPLICATION ▶This consumables are suitable for AG-60 AG-60P SG-55 WSD-60 Cutting Torch ,use for CUT60,CUT60SP,CUT50DP ,CUT50PI,LGK-60 ,LTP 5000 etc plasma cutter.
  • PACKAGE INCLUDED▶10 x -Extend Tip+10 x Electrodes+2 x protective cases+2 x isolation blocks.
  • OUR PROMISE ▶We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

Samsung SSG-4100GB 3D Active Glasses (2012 Models)

  • 3D Shutter glasses enable viewer's 3D experience.
  • One 3D Blu-ray movie title "Monsters vs. Aliens".
  • 2 pairs of Samsung - Battery-Operated 3D Glasses.
  • Compatible: C7000, C8000, C9000 series LED-LCD HDTVs, C750 series LCD HDTV, C7000 and C8000 series plasma HDTVs and BD-C6900 Blu-ray players..
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock