Reviews Adjustable Shower Head Holder

Shower Head Holder All Metal Handheld Shower Wand Bracket Adhesive Shower Wall Mount Holder Brass Shower Spray Holder Brushed Nickel Drill Free Glue Installation

  • ...site and shiny brushed nickel finish resists corrosion and tarnish well, easy for daily clean and maintain.Use strong glue to install, don't worry about not sticking.If you find that the glue is dry, please contact us for a solution ASAP..
  • 【Moving & Adjusting】：This shower head holder bracket is movable and adjustable. Due to the leverage, hand shower holder is easy to adjust and move after putting handheld shower into shower head wall mount holder and installing on the wall. But if without hand shower and any support point, it is hard to move and adjust. The swivel ball joint is tightened to bear heavy shower heads without sliding down easily. After using for some time, the shower wand holder works fine..
  • 【Card Slot Diameter】：The shower head holder nickel is designed with tapered card slot. Its top diameter is 0.9”(23mm), the bottom diameter is 0.78”(20mm), its depter diameter is 1.14”(29mm), fits for shower hose bottom diameter between 0.75inch-0.78inch(19-22mm). Please mind and measure your shower hose bottom diameter before you order. NOT fits for shower hose bottom diameter >=0.9inch(>=23mm). (NOTE: Waterpik Massages Handheld Shower doesn’t work for this shower head wall holder)..
  • 【Drill-Free Hand Shower Holder Mount....
Check Stock

TAILI Shower Head Holder and Suction Shower Caddy with 4 Hooks,Suction Cup No Drilling Waterproof Shower Basket Shower Organizer for Shampoo, Body Wash,Conditioner, Plastic Shower Rack for

  • Slot Diameter 0.7-0.9 Inch: Fit most shower head . It is recommended to measure the size before buying. shower head holder suction with adjustable slot for holding existing showerhead. With the size of 0.7-0.9 inch, it fits standard plumbing fixtures..
  • Use Tips: This powerful shower head holder wall mount works best for non-porous, smooth surfaces such as glass, mirror, ceramic tile, polished metal, plastic board, etc. Suction cup will not work on any bumpy or uneven surface..
  • No Drilling and Easy to Install : You can install the suction adjustable shower head holder within 1 second. No drilling and no screws needed. Stable, waterproof and rustproof, the handheld shower head holder will not damage to your wall and leave marks after removing..
  • Waterproof Material: The suction cup shower head holder made of engineering grade ABS plastic . Waterproof, rust/corrosion resistant. Sturdy enough to easily use in wet bathrooms for long last..
  • Angle and Height Adjustable: Swivel design is convenient to adjust the angle of showerhead up to 70 Degrees. Suction cup is removable and replacable. You can place your handheld shower head or bidet sprayer to anywhere you need. For high or low position, inside or outside of bathtub. Suitable for your wife,kids or paren....
Check Stock

Adhesive Shower Head Holder Wall Mount Handheld Shower Head Bracket Bidet Shattaf Spray With Hanging Hook Adjustable Handheld Shower Head Wall Mount Showerheads Holder With Adhesive 3M Stick Disc

  • Strong Adhesion And Adjustable Shower Head Holder--Our adhesion shower head holder made of Strong 3M adhesion sticker and special designed swivel adjustable holder part, makes you could easily adjust the angle of the shower head to any position you want. And we designed a hanging hook to hang the towel and shower balls when you take shower..
  • Durable Shower Wand Holder--Made of advanced waterproof space ABS and the backing is not metal, but it is a paper-like flexible composite designed to bond the adhesive to the main structure of the stent.Appearance color matches most shower hose colors, silver looks more noble in your bathroom, Modern clear designed, Ensuring quality and longevity..
  • Easy To Install--Clean the target position Peel off the protection cover at of shower hose holder, press and squeegee air from center to the edge and stack mount the back part and shower holder part with the snap joint. Keep it dry for 12 hours before hanging things or put on the shower head. No need to drill, even the whole process can be done in a few seconds..
Check Stock

HMEGAO Handheld Showerhead with Slide Bar Combo, Modern Matte Black Copper High Pressure Hand Showerhead With 59 In Metal Hose, Wall Mount Adjustable Holder Slide Bar Kit With Handheld Showerhead

  • ...lity. The multi-layer electroplating on the surface of the hand showerhead and slide bar has passed the ten-level salt spray test, which can easily face the surface corrosion by humid environment in the shower room.Durable and reliable bathroom showerhead with holder bar provides you great experience for daily use..
  • Adjustable Height Slider Bar With Shower Head -:- -:- The modern shower head slider kit with removable shower arm allows you to adjust the height of the shower head at will, so you can enjoy the comfort of your shower to the fullest. Wall mount adjustable shower bracket set supplied to shower bracket, 59 inch stainless steel shower hose, 360 degrees Rotary adjustment kit adjustable shower height and angle to adapt to children and adults..
  • High Pressure designHand Shower With Slide Bar -:- -:- Sturdy Durable holder slide bar with shower head that offers intensely powerful full-body spray with forceful streams of water to satisfy your showering needs, let you relax in the shower and enjoy the shower time. This classic black hand showerhead with hose is perfect for modern luxury or farmhouse decor style home bathroom, hotel bathroom,apartment bathroom, B&B bathroom etc..
  • Adjustable Holder Slide Bar Kit Easy To Install -:--:- Matte black slide b....
Check Stock

Handheld Shower Head Holder, 360° Adjustable Showerhead Holder Stainless Steel Bathroom Shower Head Bracket, Metal Shower Spray Holder Wall Mount

  • STAINLESS STEEL SHOWER HEAD HOLDER: This adjustable shower head bracket is made of sturdy stainless steel SUS304. The brushed nickel finish matches your shower head and wand very well. Once fixed with screws, it can be used for many years.
  • VERY STABLE: The Shower Head Holder will be firmly fixed to the wall, so you don’t have to worry about hearing the sound of falling in the middle of the night, and you don’t have to worry about the Shower Head Holder falling off the wall and hurting your family during use. The swivel design makes it easy to adjust the angle of the shower head, 360° can be adjusted to any spray position you want.
  • COMPATIBILITY For MOST SHOWER HEAD: The top diameter of the holder is 0.9 inch (23mm) and the bottom diameter is 0.79 inch (20mm). The base diameter is 60MM(2.35inch), overall height 70MM(2.75inch) (Please CHECK THE SIZE of your shower head before purchase).
  • 2 INSTALLATION METHODS: You can use the screw set to install the shower handheld holder in the bathroom you need, or you can use glue to stick it on the bathroom wall. It is more sturdy and durable to install with screws. If conditions permit, it is more recommended to install with screws.
  • PACKAGE AND CUSTOMER SERVICE: 1 x Stainless Steel Shower Head Holder, 1 x Hardwa....
Check Stock

Lokyanwin Shower Head Holder,360°Adjustable Stainless Steel Handheld Shower Head Bracket Holder Wall Mount,Steel Shower Spray Holder Wall Mount Shower Wand Holder,Brushed Nickel SUS304

  • ... Holder】- Provided with a strong adhesive glue for no drill, no screws installation. This shower head holder bracket is drill-free and nail-free, no plumbers required and no harm to wall surfaces. Easy to install in few minutes, just follow with the clear installation manual. The shower head wall mount bracket is adjustable to maximum 55° downward up and down to meet your shower needs..
  • 【Installation & Application】- Firstly, measure and determine your installation height before installing rv shower head bracket. Apply little glue around the bottom edge(Do not apply to centre), then press it tightly to contact wall surface and use auxiliary sticker to help fix shower holder bracket. Dry for 48 hours after installation until glue is completely solidified before using. (Not works on uneven/fragile surfaces: Fiber glass/Mirror/Rugged wall/Concave wall/Textured wall/Lime cement).
Check Stock

ShowerMaxx | Shower Head Holder in Brass Finish | Showerhead Mounts for Handheld Showerheads | Arm Bracket with Swivel Ball Connector | Adjustable Universal 1/2 in Male Female Shower Heads Wall Mount

  • ... brackets is that they don’t provide a tight grip, causing the actual hand held shower knob to fall, droop, or sway. We put a custom cone washer inside the swivel joint that guarantees the shower head stays in place all the time, even when you take the head out or change the angle. This product comes with a large adjustable nut with grooves so you can adjust it, even when hands are soapy and wet..
  • ► MADE WITH HIGH END, QUALITY MATERIALS The ShowerMaxx mount is constructed with premium grade ABS, an opaque thermoplastic polymer material. With its swivel ball joint made with brass, our product is designed to provide heavy duty endurance and functionality as well as being aesthetically beautiful. Its polished brass finish means it is anti-rust, anti-corrosive and will maintain its integrity from minerals and sediments in the water. It also Includes a sand disk to filter sediments..
  • ► LEADING IN CUSTOMER SERVICE We at ShowerMaxx are so confident in our product, we provide a lifetime warranty for any purchase. We want to make sure you are completely satisfied with your product, so we are available 24/7 for any questions, comments, or concerns. Quality customer service and support is paramount to our success and we pride ourselves best in class for cus....
Check Stock

Adjustable Shower Head Holder, 360° Handheld Showerhead Holder Stainless Steel SUS304 Bathroom Shower Head Bracket, Ultra Durable Metal Shower Spray Holder Wall Mount

  • 【STAINLESS STEEL SHOWER HEAD HOLDER】This adjustable shower head holder is made of solid strong stainless steel SUS304. Heavy duty sturdy stable waterproof and rust-proof..
  • 【NEVER DROP】It is more stable to install with screws, and you don’t have to worry about the sudden drop of the shower bracket to scare you or hit your child. (It can also be installed with glue, but you need to prepare strong glue yourself) If conditions permit, more recommended to install with screws.
  • 【360 DEGREE ADJUSTABILITY】Being adjustable up and down, this shower wand head bracket enables you to rotate the shower head to a comfortable angle by using the wand as a lever, and it stays firm and tight in every angle. Perfect for taking a quick shower without getting your hair soaked.
  • 【PRODUCT SIZE】The top diameter of the holder is 0.9 inch (23mm) . The base diameter is 55MM(2.16inch), overall height 68MM(2.67inch). Its recommended to check the size of your shower head before purchase..
  • 【NO WORRIES AFTER SALE】We provide quality 24-hour service. If you are not satisfied with the product, you can enjoy a 100% refund. Have any questions, please feel free to contact us..
Check Stock

SparkPod Handheld Shower Head Holder - 360 Rotatable and Adjustable Solid Brass Joint - Compatible with Most Showerhead Hose Adapters - Teflon Tape Included (Standard 1/2') (Luxury Polished Chrome)

  • EASY INSTALLATION: No plumber or other tools needed - our luxury chrome hand held shower holder comes with Teflon tape & washers so you can instantly upgrade your bathroom's look & your shower experience..
  • PREMIUM QUALITY SHOWER HOLDER: This shower head holder is made from high grade ABS material that is durable & sturdy, making this the last shower bracket you’ll ever need to keep your showerhead in place..
  • ROTATING BALL JOINT: Adjustable shower head & hose holder that grips your showerhead securely. The solid brass ball bearing provides a 360 degree rotation for the ultimate flexibility & control in your desired angle..
  • STANDARD 1/2" CONNECTOR: Our shower head arm holder is designed with well-defined threads that do not leak, and tested to fit a wide range of handheld shower heads & shower arm connectors from SparkPod or other brands..
  • TRANSFORM YOUR SHOWER EXPERIENCE: Our dedicated Customer Happiness team is available every day of the week to answer any questions about your metal shower holder. Your order is backed by a 30-day money-back guarantee and a 1-year warranty!.
Check Stock

Shower Head Holder Adjustable Handheld Shower Head Bracket Adhesive Shower Wall Mount Holder Brass Shower Wand Holder Oil-Rubbed Bronze Drill Free Glue Installation

  • 【Durable Metal Quality】：Built from Solid Brass, All Metal, no plastic. Heavy duty, premium quality, water-proof and rust-proof. This Adjustable....
  • 【Moving & Adjusting】：This bronze shower wand holder is movable and adjustable. Due to leverage, it is easy to move after installing on the wall....
  • 【Card Slot Diameter】：This handheld shower head holder is a tapered card slot. The top diameter is 0.9”(23mm), the bottom diameter is....
  • 【Drill-Free Adhesive Shower Head Holder】：Provided with a strong adhesive glue for installation. This shower arm wall mount holder is no dril, no....
  • 【Installation & Application】：Before installing shower wand holder, first to test and determine your installtion height. Apply little glue around....
Check Stock