Reviews Adjustable Print Bed

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • 【PACK of 3】Our 3D Printer build plates are 16" x 16" (400mm x 400mm) square, fully matches heated bed on many popular 3D printers, such as Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Com....
Check Stock

FYSETC 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling - 10 Pack

  • Please Note: The length of it is 20mm which is not suitable for CR10 series products).
  • Die Spring: compatible with most 3D Printer Bed, great Ender 3/2 TronXY X5S/ Geetech A10m heat bed springs, flat top and stiffer.
  • (Note: The length of it is 20mm which is not suitable for CR10 series products).
  • Rectangular Section, strong, keeps print bed level better..
  • They couldn't be easier to install! Unscrew the adjustment knobs from the bottom of your print bed and replace those springs with these new ones. Screw the adjustment knobs back into the print bed with these new springs and you're done! Level your bed and keep on printing!.
Check Stock

MMOBIEL 5Pcs 3D Printer Accessories 3D Print Removal Tool Shovel Tool Set, Stainless Steel 3D Printer Spatula Palette Knife with Sturdy Wooden Handle to Remove Models from 3D Printers

  • High Quality Toolkit: The removal cleaning tool blades are made of hardened stainless steel, with good elasticity. Rust and corrosion resistance for long time use. Comfortable and durable wooden handle provide excellent Grip and works Great..
  • Function and Use: 7 Pallete Knives with different Heads. The shorter spatula is thin enough to get an edge underneath even the most stubborn of prints, which easily gets under the piece to lift off the print bed. The long and bigger ones are very useful for release larger part. Large Wooden handles give some leverage and work really well with 3D prints without damaging either the model or the print bed..
  • How to Use: To remove prints off the bed, fast and efficient work the edge of the tool under a corner of the print, about half way between the tip of the blade and the handle. Use a sawing motion to get the tool under the rest of the print to separate it from the bed. Twisting the blade slightly will help speed up the lifting of the print..
  • High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock.
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

Reversible Paw Print Pet Bed in Blue / White, Dog Bed Measures 28.5L x 19.5W x 3H for Medium Dogs, Machine Wash

  • Comfortable reversible pet bed, blue & cream w/ paw print pattern | Pet bed fits 30" long metal dog crates.
  • Pet bed measures 28.5L x 19.5W x 3H & is ideal for medium dogs weighing up to 40 lbs | Not recommended for excessive chewers.
  • Ultra-soft synthetic fur reversible (blue paw print top & fleece bottom) pet bed.
  • When used w/ a dog crate the pet bed creates a cozy den enviroment further enticing your dog to use their pet home.
Check Stock

BANTI Adjustable Bed Base Frame, Motorized Head and Foot Incline,Under Bed LED RGB Light, Wireless Remote Control, Dual USB Ports and Customized Positions, Twin XL, Ergonomic, Black

  • Ergonomic Adjustable Bed Frame: BANTI electric adjustable bed frame with wireless remote control, motorized head and foot incline with sturdy steel frame support up to 750 lbs. The premium motor is extremely reliable, quiet, and responsive..
  • Product Dimensions :79.3 x 37.6 x 10.8 inches.Maximum Weight Recommendation : 750 Pounds.
  • Customized Your Own Bed: Independent head incline from 0 to 60 degrees and foot incline from 0 to 45 degrees. Our BANTI electric adjustable bed frame has preset zero-gravity, anti-snore and memory positions which can be cosy for snorers or those who like to read or watch TV in bed..Multifunctional Adjustable Bed Base: BANTI adjustable bed base is equipped with an under-bed LED strip light with RGB, white, and other colors that can be controlled at will, adjustable bed frame also has dual USB ports which can provide easier charging for electronic device..
  • Free Combination: BANTI adjustable bed frame is designed as foldable bed frame, easy to combine if you have two bed bases. i.g. TXL+TXL=Split King, If you need split king adjustable bed frame, just purchase 2 * TXL..
  • 10 Minutes to Assemble: Follow our instructions, just unfold the bed base, attach the legs , plug in and start to enjoy our BANTI adjustable bed frame within only 1....
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

Reversible Paw Print Pet Bed in Blue / White, Dog Bed Measures 21L x 12W x 1.5H for X-Small Dogs, Machine Wash

  • Comfortable reversible pet bed, blue & cream w/ paw print pattern | Pet bed fits 22" long metal dog crates.
  • Pet bed measures 21L x 12W x 1.5H & is ideal for x-small dogs & cats weighing up to 12 lbs | Not recommended for excessive chewers.
  • Ultra-soft synthetic fur reversible (blue paw print top & fleece bottom) pet bed.
  • When used w/ a dog crate the pet bed creates a cozy den enviroment further enticing your dog to use their pet home.
Check Stock

FLASHFORGE Adventurer 4 Lite 3D Printer with Removable 0.4mm 240℃ Nozzle Extruders Glass Building Platform Free-Leveling Plate Resume Accurate Mute and on Cloud Printing AD4 Lite

  • AUTO BED LEVELING: Eliminate the hassles of bed leveling with screws and springs. The built-in inductive sensor can automatically level the print bed,....
  • HEATED AND REMOVABLE GLASS BUILD PLATE: The glass build plate provides the flattest surface possible, ensuring that the first print layers are....
  • FILAMENT DETECTOR: With the Ultimate 2, you have no need to worry about running out of filament in the middle of a print. The built-in filament sensor....
  • FULLY ENCLOSED: Environmental factors can cause prints to curl, split, or otherwise fail, especially when working with more temperature sensitive....
  • INTERNAL LIGHTING: The full enclosure has the negative effect of making it more difficult to see your print, without using a flashlight or other spot....
Check Stock

Siaomo Sheet Fasteners Suspenders Straps - Adjustable Crisscross Bed Sheets Holder Clips Elastic Band Sheet Keeper Stays Grippers,2Pcs/Set White

  • 1, BED SHEET STRAPS SUSPENDERS : Multi-functional Adjustable length from 96cm/38inch –171cm/67.3inch, Nickel Plated Clamps with Fabric Protector..
  • 2, BED SHEET HOLDER STRAPS : Fit to various beds. Perfect for sheet and flat sheet, Adjustable length allows desired tension. The newest and hottest product being used for keeping sheets tight all night long.
  • Great For Bed Sheets and Mattress Covers Fasteners.
  • sheet holder,bed sheet holder straps,bed sheet corner clips grippers straps,adjustable elastic sheet straps grippers,sheet fasteners.
  • 3, BED SHEET FASTENTERS STRAPS : Built-in plastic clenching system protects fabric from harm.
  • Sturdy chrome metal clips and Wider elastic bands provides stable and stronger grip for heavy duty purpose.
  • Perfect Bed Sheet and mattress Cover Fastening System.
  • 4, BED SHEET STRAPS CLIPS: Hold sheets tight all night long, keep your bed looking great at all times, Never worry about messy or wrinkled sheets again. Make your life easier.
  • sheet holder,bed sheet holder straps,bed sheet corner clips grippers straps,ad....
Check Stock