Reviews Adjustable J bolts

Tnisesm Adjustable Battery Hold Down, with Universal Crossbar 8 Inch 304 Stainless Steel J Hook Bolt Sets

  • Car battery hold down is made constructed with Premium iron crossbar & 304 Stainless steel j bolt sets, sturdy, and available for long service life.Special spray process for enhancing its corrosion and rust resistance..
  • Universal adjustable crossbar, from 13.5cm/5.35" to 20cm/7.85" wide, with 8inch J-Bolt..
  • The surface is anodized for a matte and durable finish. Easy to install and uninstall, provides steady holding for the battery. Please confirm size specifications for fitment before purchasing..
  • Simple design,easy installation, replace your old battery holder directly..A perfect modification accessory for racing, sports car, RV,boats,etc..
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Steel J-Bolt Hinge Doors Gates 1/2 Inch Heavy-Duty Welded Hinge Heavy-Duty Driveway Gates for Welding on Larger Iron or Steel Gates, 2 Packs

  • J-Bolt Hinge is the perfect accessory for your iron gate or revolving door..
  • J hinges made of heavy and strong iron, you can use it for a long time..
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Product dimensions: please see product images..
  • Package Include: 2 Packs welded hinge, 2 bolts, 4 nuts, and 4 washers..
Check Stock

Signature Fitness SF-3 1,500 Pound Capacity 3” x 3” Power Cage Squat Rack Includes J-Hooks and Safety Straps Other Optional Accessories Red

  • Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
  • Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
  • Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
  • Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
  • Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
  • many additional accessories available for purchase.
Check Stock

LotFancy Adjustable Battery Hold Down, Universal Battery Bracket with J Hook, Battery Tie Down Kit, 9.1inch (23cm) Bolt Length

  • Adjustable: Bolt length: 9.1inch (23cm). 3.74inch long thread for height adjustment. Adjustable cross-bar expands from 5.7" to 8.5" wide. Thread size: 1/4"-20 UNC. Please confirm your battery size before purchasing.
  • High Quality: This car battery hold down is made of premium iron, sturdy and available for long service life. The surface is anodized for enhancing its corrosion and rust resistance.
  • J Hook: Compared with other’s L hook, our J hook can hold down battery more securely. It won’t slide out of the tray easily.
  • Easy to Install: Adjust the width and height according to the size of the battery, hook the J hook into the hole on the tray, tighten the wing nut screws to ensure a firm grip on the battery. The battery holder provides steady holding for the battery.
  • For Most Battery Size: This adjustable battery holder can be used for group 21，21R，22F, 22R, 24, 25, 26, 26R, 27, 31, 33, 34, 34R, 35, 36R, 41, 42, 43, 46, 47, 48, 49, 65, 78, 94R Batteries and most group size batteries.
Check Stock

papababe Squat Rack 800 LB Capacity Power Rack 2\x 2\ Steel Power Cage Exercise Stand with 4 J-Hooks for Bench Press, Weightlifting and Strength Training

  • 800 LBS WEIGHT CAPACITY- Heavy-duty 2" x 2" and 11 - 12 gauge tubular steel frame construction with a 800 lb max weight capacity, you could make serious gains from this power cage and push pass your limits..
  • 33 ADJUSTABLE HEIGHT LEVELS- 33 vertical height settings allow for various adjustments of the J-Hooks and the safety bars, suitable for different exercise and people of different heights. From 17.5" to 68" height, you can use it for a squat rack and bench press, a pull-up bar and more..
  • ALL-IN-ONE STANCHION- All-in-one stanchion provides greater load bearing capacity, unshakable sturdier user experience and easier assembly than workout cage which have to be assembled from 2 separate poles..
  • UNSHAKABLE STURDINESS- 82" x 48" x 47"(LxHxW), 2" x 2" steel frame ensures a stable construction for years of use. Four bolt holes come with every foot of the cage, you can bolt the gym rack to floor easily..
  • HIGH QUALITY & SAFETY GAURANTEED- Adjustable J-hooks and 25.5" safety bars with combined weight capacity of 800 pounds and 26 adjustable height levels give you peace of mind as you focus on your strength training, also compatible with 7 ft Olympic bars..
Check Stock

DC66-00777A Washer Pulsator Cap Replacement Part by Blue Stars - Exact Fit for Samsung Washers - Replaces 3282678 5788799 AP5788799

  • ✅ MODEL NUMBER: DC66-00777A Washer Pulsator Cap..
  • ✅ EASY TO INSTALL: It is made exactly fit for the most top name brand (Samsung) and replaces part numbers: 3282678, 5788799, AP5788799, PS8753312..
  • ✅ FIT MODELS: WA45H7000AP, WA45H7000AW, WA45H7200AP, WA45H7200AW, WA48H7400AP, WA48H7400AW, WA48J7700AW, WA48J7770AP, WA48J7770AW, WA50F9A6DSW, WA50F9A7DSP, WA50F9A7DSW, WA50F9A8DSP, WA50F9A8DSW, WA52J8060AW, WA52J8700AP, WA52J8700AW, WA52J8705MP, WA52J8705MP/A20000, WA52J8705MP/A2 0000, WA52J8707MP, WA52J8707MP/A20000, WA52J8707MP/A2 0000..
  • ✅ PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. It fits over the wash plate mounting bolt to protect the bolt and prevent clothing from catching on the washplate. Easy to install, no tools required. Unplug the washer before installing this part. Wear work gloves to protect your hands..
  • ✅ MONEY-BACK GUARANTEE: For any reason, you're not completely satisfied, you can ask for a replacement or full refund, no questions asked..
Check Stock

KONDUONE DC66-00777A Pulsator Cap for Samsung Washer Replace # 3282678 5788799 AP5788799 PS8753312

  • ...DSW/A2-0001 WA52J8060AW/A2-0000 WA52J8060AW/A2-0001 WA52J8700AP/A2-00 WA52J8700AP/A2-0000 WA52J8700AW/A2-0000..
  • ✅[Replaces Part Number]: DC66-00777A 3282678 5788799 AP5788799 PS8753312, this cap is a direct replacement for dispenser on your Samsung washer. The Washer Washplate Cap fits over the washplate mounting bolt to protect the bolt and prevent clothing from catching on the washplate. Unplug your washer before installation. Please wear work gloves to protect your hands..
  • ✅[Buy with Confidence]: Order from KONDUONE, we offer LIFETIME WARRANTY, true worry-free shopping experience. If the cap ever fails on your Samsung washer simply contact us for a replacement and save money off of dealer prices..
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 5/8 Inch - LM144

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock