Reviews Adjustable Die Tap Set

J&R Quality Tools 40-Piece Titanium Coated Tap & Hexagon Die Set - SAE

  • Includes both fine and coarse threaded taps and die in SAE sizing..
  • Complete with compact custom fit latched ABS storage and carry case to protect and organize..
  • Set Includes: 17pc Tap& 17pc Die: 4-40unc, 6-32unc, 8-32unc, 10-24unc, 10-32unf, 12-24unc, 1/4-20unc, 1/4-28unf, 5/16-18unc, 5/16-24unf, 3/8-16unc, 3/8-24unf, 7/16-14unc, 7/16-20unf, 1/2-13unc, 1/2-20unf, 1/8NPT27.
  • Professional grade set of Titanium over alloy steel for superior cutting power without brittleness..
  • Adjustable and T-Handle tap wrenches, adjustable die wrench, screwdriver, thread pitch gauge..
Check Stock

86PC Tap and Die Set Combination Metric Tap and and Die Set Tungsten Steel Titanium SAE and Metric Tool

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Sae And Metric Included: This  tap and die set comes with 86 pieces in total: 39 pcs taps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

60 PCS Tap and Die Set Metric and Standard Sizes Included Tap Die Kit Metric and SAE for Threading and Rethreading Internal and External Threads

  • SAE & METRIC TAP & DIE SET: These 54 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional and metric sizes.
  • the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our standard and metric tap die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 5-10mm long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads.
Check Stock

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

  • Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.
Check Stock

SAE Tap and Die Set Standard | #4, 6, 8, 10, 12, 1/4, 5/16, 3/8, 7/16, 1/2\ Tap Set and Die Set | Thread Repair Kits for Threading and Rethreading Internal and External Threads

  • SAE TAP & DIE SET: These 34 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional sizes.
  • the set also includes a long-handled tap wrench, 2 T-handle tap wrenches, an adjustable die wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our SAE tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 in. long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The whole tool set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them.
Check Stock

Hanson 1765542 1/4-20 - 1/2-13 Pts SAE Set for Tap Die Extraction 12 Piece

  • Tap and die set includes: Fractional: 1/4" - 20 NC, 5/16" - 18 NC, 3/8" - 16 NC and 1/2" - 13 NC.
  • Also includes 1" die stock, die spacer, small and medium adjustable tap sockets and a T-bar.
  • Handles allow more comfort and control when threading.
  • The ergonomic handles on the drive tools allow more comfort and control when threading.
Check Stock

Happybuy 86PC Tap and Die Set Combination Metric Tap and Die Sae Tap and Die Set Tungsten Steel Titanium SAE and Metric Tool (86PC Tap and Die)

  • Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
  • Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
  • Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
  • Adjustable Tap Wrench: Ta wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
  • Most Popular Sizes Included: This tap and die set comes with 86 pieces in total: 39 pcstaps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..
Check Stock

Toolly 32pcs Tap and Die Set, Metric Hardened Steel Tool Set, Essential Threading & Rethreading Tool with Storage Case Perfect for Auto and Machinery Repair

  • 【32pcs Tap and Die Set】The package includes 28pcs (each size including 1x taper tap, 1x second tap, 1x plug tap and 1x die): M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 1.0, M8 X 1.25, M10 X 1.5, M12 X 1.75.
  • 1 x Tap Wrench, 1 x Die Stock Wrench, 1 x Thread Pitch Guage, 1 x Screwdriver, to cover all your needs..
  • 【Product Function】Tap and die set in metric is perfect for rethreading fasteners, fastener holes for auto and machinery repair. Threading tool with storage case, can greatly increase your productivity and act as an important part to your work..
  • 【Tapered Teeth Design & Versatility】Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily. Perfect for creating new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel..
  • 【High Quality & Durable】Tap and die set adopts premium hardened steel material. The screw thread tapping tool is durable to use. The better the material the tougher the tap and die so they ensures durability and tool longevity to withstand professional uses..
  • 【SIZE LABLED】All of them are clearly labled with size for you to find quickly, and be able to pull the right size out of the box when you ....
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it..
  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Check Stock

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

  • ...er and the surface becomes stainless steel, making it to be more bright and textured.
  • Size information: the package comes with 9 x metric taps and 9 x metric dies in different specifications, namely, M3 (0.5 mm)/ M4 (0.7 mm)/ M5 (0.8 mm)/ M6 (1 mm)/ M7 (1 mm)/ M8 (1.25 mm)/ M9 (1.25 mm)/ M10 (1.5 mm)/ M12 (1.75 mm).
  • Adjustable tap wrench handle measures about 19.5 cm/ 7-11/16 inch long, suitable for M3 to M12 (1/16 to 1/2 inch), and the die wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
  • Suitable for beginners and skilled people: this tooth opener kit is the nice assistant for craftsmen no matter if you are a novice or a skilled worker, which is very suitable for cleaning low-carbon steel or aluminum products in construction, automobile maintenance and factories, largely improving work efficiency and having strong practicability.
Check Stock