Reviews Adjustable Cylinder Stand

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

  • [2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
  • This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
  • [1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
  • [11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
  • maximum length when fully extended: 17.4 inches.
  • adjustable range: 5.5 inches, Load capacity: 1000lbs.
  • Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
  • Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..
Check Stock

Iron Black Front Double Door Handleset(Keyed&Dummy Set, Matte Black)

  • ADJUSTABLE HOLE DISTANCE-- YES, it is fit for both new door and replacement the old, it comes adjustable hole distance-There are THREE hole distance to fit for different hole, you can adjust the hole distance accordingly. Three hole distance are 214mm(8.425IN) ，230mm(9.055IN) ,and 245mm(9.646IN).
  • TWO Keyed-alike Cylinder-- This handleset comes with 2 pcs Keyed-alike cylinder, one is for this handleset, the other is for any one who like to be keyd-alike(SAME KEYS), you can use one of our cylinder to replace your cylinder of back door or side door so that they are the same keys with the main door..
  • Adjustable backset--This Double door handle set with 2 3/8 inch- 2 3/4 inch adjustable backset latch with square corner striker,and fits 1-3/8-Inch-1-3/4-Inch doors..
  • Double Door Handleset This keyed&dummy set comes 2 handle, one is keyed entry handle(active), the other is dummy handle(inactive)..
  • Reversible for both right and left handed.
Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
  • 【Parameter Details】Maximum pressure: 10T.
  • Max Axial maximum pull distance： 50mm.
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..
Check Stock

NEWBANG Matte Black Double Door Handle Set,(Keyed and Dummy Set),MDHST2018DB-SET

  • ADJUSTABLE HOLE DISTANCE-- YES, it is fit for both new door and replacement the old, it comes adjustable hole distance-There are THREE hole distance to fit for different hole, you can adjust the hole distance accordingly. Three hole distance are 214mm(8.425IN) ，230mm(9.055IN) ,and 245mm(9.646IN).
  • TWO Keyed-alike Cylinder-- This handleset comes with 2 pcs Keyed-alike cylinder, one is for this handleset, the other is for any one who like to be keyd-alike(SAME KEYS), you can use one of our cylinder to replace your cylinder of back door or side door so that they are the same keys with the main door..
  • Adjustable backset--This Double door handle set with 2 3/8 inch- 2 3/4 inch adjustable backset latch with square corner striker,and fits 1-3/8-Inch-1-3/4-Inch doors..
  • Double Door Handleset This keyed&dummy set comes 2 handle, one is keyed entry handle(active), the other is dummy handle(inactive)..
  • Reversible for both right and left handed.
Check Stock

A-Team Performance - GM Universal Manual Master Cylinder Rod Kit

  • GM Universal Manual Master Cylinder Rod Kit.
  • 1950-1970 GM Universal Manual Master Cylinder Rod Kit.
  • Works with power and non-power applications Includes adapters for 10 most common combinations.
  • Accommodates eyelet, clevis & bell crank configurations Universal Adjustable Push Rod.
Check Stock

NEWBANG Matte Black Double Door Handle Set Keyed and Dummy Set ,MDHST2016DB-SET-BR-1

  • ADJUSTABLE HOLE DISTANCE-- YES, it is fit for both new door and replacement the old, it comes adjustable hole distance-There are THREE hole distance to fit for different hole, you can adjust the hole distance accordingly. Three hole distance are 214mm(8.425IN) ，230mm(9.055IN) ,and 245mm(9.646IN).
  • TWO Keyed-alike Cylinder-- This handleset comes with 2 pcs Keyed-alike cylinder, one is for this handleset, the other is for any one who like to be keyd-alike(SAME KEYS), you can use one of our cylinder to replace your cylinder of back door or side door so that they are the same keys with the main door..
  • Adjustable backset--This Double door handle set with 2 3/8 inch- 2 3/4 inch adjustable backset latch with square corner striker,and fits 1-3/8-Inch-1-3/4-Inch doors..
  • Double Door Handleset This keyed&dummy set comes 2 handle, one is keyed entry handle(active), the other is dummy handle(inactive)..
  • Reversible for both right and left handed.
Check Stock

NEWBANG Double Front Door Handle Set Brushed Nickel Finish,(Keyed and Dummy Set),MDHST2018SN-SET

  • ADJUSTABLE HOLE DISTANCE-- YES, it is fit for both new door and replacement the old, it comes adjustable hole distance-There are THREE hole distance to fit for different hole, you can adjust the hole distance accordingly. Three hole distance are 214mm(8.425IN) ，230mm(9.055IN) ,and 245mm(9.646IN).
  • TWO Keyed-alike Cylinder-- This handleset comes with 2 pcs Keyed-alike cylinder, one is for this handleset, the other is for any one who like to be keyd-alike(SAME KEYS), you can use one of our cylinder to replace your cylinder of back door or side door so that they are the same keys with the main door..
  • Adjustable backset--This Double door handle set with 2 3/8 inch- 2 3/4 inch adjustable backset latch with square corner striker,and fits 1-3/8-Inch-1-3/4-Inch doors..
  • Double Door Handleset This keyed&dummy set comes 2 handle, one is keyed entry handle(active), the other is dummy handle(inactive)..
  • Reversible for both right and left handed.
Check Stock

JESSEM Mast-R-Lift Excel II Included Complete Router Table System

  • Includes JessEm Mast-R-Lift Excel II for most cylinder router motors.
  • 32" x 24" phenolic table with aluminum extruded miter track & T-track.
  • Extruded aluminum router table fence with fully adjustable fence faces.
  • Rigid, heavy-duty steel stand with upper and lower stretchers.
  • Optional Digital Readout Attachment and Pow-R-Tek Remote Power Switch not included.
Check Stock

Double Door Handlset for Front Door Brushed Nickel Finish (Keyed Entry Handle and Dummy Hanlset Set),MDHST2016SN-DOUBLE-1

  • ADJUSTABLE HOLE DISTANCE-- YES, it is fit for both new door and replacement the old, it comes adjustable hole distance-There are THREE hole distance to fit for different hole, you can adjust the hole distance accordingly. Three hole distance are 214mm(8.425IN) ，230mm(9.055IN) ,and 245mm(9.646IN).
  • TWO Keyed-alike Cylinder-- This handleset comes with 2 pcs Keyed-alike cylinder, one is for this handleset, the other is for any one who like to be keyd-alike(SAME KEYS), you can use one of our cylinder to replace your cylinder of back door or side door so that they are the same keys with the main door..
  • Adjustable backset--This Double door handle set with 2 3/8 inch- 2 3/4 inch adjustable backset latch with square corner striker,and fits 1-3/8-Inch-1-3/4-Inch doors..
  • Double Door Handleset This keyed&dummy set comes 2 handle, one is keyed entry handle(active), the other is dummy handle(inactive)..
  • Reversible for both right and left handed.
Check Stock