Reviews Adhesive Paste Epoxy - BestBuyersPro.com

HTVRONT White Resin Pigment Paste - 1.76oz/50ml White Epoxy Dye Pigment, Higher Concentrated & Easy to Mix White Epoxy Pigment for Resin Coloring, Ocean Waves and Water Effects

【White Resin Pigment Paste】If you want opaque color effect for your resin, this epoxy dye pigment is your best choice. You will get your project with bright opaque white and no mess. Each white resin dye is 1.76oz/50ml, large capacity allows for a lot of wildest creations and never run short of creativity. Why not making some creative crafts to your families and friends with our white pigment for resin?.
【Higher Concentrated & Easy to Mix】A little epoxy dye goes a long way. This resin pigment paste is more pigmented than resin pigment liquids, easy to diffuse in the resin with saturated color and uniform gloss, just need one drop and you will be shocked by the color effect, also never worry about fade problem. In order to curing normally, dye added should less than 5% by weight of the entire project for large projects, and below 1% of the entire project weight for small one..
✨【Easy to Use & Leak-proof Design】The white epoxy dye pigment requires no preparation and is ready to use. White epoxy resin pigment with specially designed sharp mouth squeeze bottle, make it easier to control your drops until you achieve your desired color, so that you c....

Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonry.
Resists moisture and can be applied to both wet and dry surfaces.
Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F.
Non-sagging paste can be used on horizontal and overhead surfaces.
Can be painted, stained, and machined after fully cured.

Two-part masonry repair epoxy adhesive paste replaces missing concrete or fills cracks on deteriorating masonry.
Resists moisture and can be applied to both wet and dry surfaces.
Can be used in indoor and outdoor applications, with an application temperature range of 35 to 115 degrees F, and a service temperature range of -20 to +200 degrees F.
Non-sagging paste can be used on horizontal and overhead surfaces.
Can be painted, stained, and machined after fully cured.

Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments.
Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber.
Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F.
High-tack paste can be used in vertical and overhead applications.
Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water.

Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments.
Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber.
Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F.
High-tack paste can be used in vertical and overhead applications.
Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water.

Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).

Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).

Cold weld epoxy adhesive paste to bond metal, rubber, fiberglass, and glass in automotive applications.
Forms a tough bond that flexes to provide impact and vibration resistance.
Continuous service temperature range from -20 to +250 degrees F.
Provides work time of 8 minutes and full cure time of 12 to 24 hours (at 75 degrees F).

Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).

Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).