Reviews Acs71current Sensor

3PCS 30A Range Current Sensor ACS712 Module AC/DC for Arduino 30A

  • Current sensor chip: ACS712ELC-30A（Note: there are 3 specifications of the product 5A/20A/30A, Pls choose them accroding to your needs.）.
  • Measuring range: ±30 amps, corresponding Analog output:66mV/A..
  • When there is no the detection current through, the output voltage is VCC/2.
  • Note: ACS712 module is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!.
  • Package includes:3 Pack 30A Current Sensor ACS712 Module..
Check Stock

NOYITO ACS758LCB-050B-PFF-T Linear Current Sensor Hall Current Module

  • This product is a current detection module, mainly using the ACS758-LCB current sensor. The ACS758 consists of a precision, low-offset linear Hall sensor circuit with a copper current path close to the wafer. The current applied through the copper current path is capable of generating a magnetic field that can be induced by the integrated Hall IC and converted to a proportional voltage.003cbr003e.
  • Device accuracy is optimized by placing the magnetic signal close to the Hall sensor. The accurate, proportional output voltage is provided by a stable chopper-type, low-bias BiCMOS Hall IC that is factory-precisely programmed.003cbr003e.
  • The internal resistance of this conduction path is typically 100 μΩ with low power loss. The thickness of the copper wire allows the device to operate under high overcurrent conditions. The terminals of the conduction path are electrically isolated from the sensor pins (pins 1 to 3). In this way, the ACS758 sensor IC family can be used in applications that require electrical insulation without the use of opto-insulators or other expensive insulation techniques.003cbr003e.
  • Perform RC filtering on the output and use the op amp to build a voltage follower circuit to make the output more stable and better match the impedance of....
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

2Pcs SCT013000 Split Core Current Transformer SCT-013-000 Non-invasive AC Current Sensor 100A/50mA

  • Current sensor chips: ACS712ELC-5A / ACS712ELC-20A / ACS712ELC-30A [There are three specifications for the product 5A / 20A /30A. You can choose the specifications according to your needs.].
  • Pin 5V power supply, on-board power indicator.
  • The module can measure range 5 / 20 /30 amps, corresponding to the analog output 100mV / A.
  • No test current , the output voltage is VCC / 2.
  • PCB board size: 31 (mm) x13 (mm)[One package contains two products with the same parameters.].
Check Stock

Current Sensing Switch 1~200A DC 10~30V Flameproof Adjustable Current Sensing Switch Adjustable DC Current Sensor Switch(Normally Open)

  • Current sensor chips: ACS712ELC-5A / ACS712ELC-20A / ACS712ELC-30A [There are three specifications for the product 5A / 20A /30A. You can choose the specifications according to your needs.].
  • Pin 5V power supply, on-board power indicator.
  • The module can measure range 5 / 20 /30 amps, corresponding to the analog output 100mV / A.
  • No test current , the output voltage is VCC / 2.
  • PCB board size: 31 (mm) x13 (mm)[One package contains two products with the same parameters.].
Check Stock

HiLetgo ACS758 ACS758LCB-050B-PFF-T 50A Linear Current Sensor ACS758LCB Current Module 120 kHz Bandwidth 3-5.5V

  • ACS758 ACS758LCB-050B-PFF-T Linear Current Sensor Module.
  • Nearly zero magnetic hysteresis, extremely stable output offset voltage.
  • Output voltage proportional to AC or DC currents.
Check Stock

SparkFun (PID 14544 Current Sensor Breakout - ACS723 (Low Current)

  • ACS723 AC DC current sensor with OPA344 OpAmp.
  • Measure both AC and DC currents from 10mA up to 5A.
  • Capable of 80KHz bandwidth. Fixed to 20KHz on board. JP1 can be closed to enable all 80KHz.
Check Stock

Current Transmitter AC 0-200A Conversion Analog 4-20mA AC Isolator Transformer Converter Current Transducer

  • High quality current sensor chips: ACS712..
  • Pin 5V power supply, on-board power indicator..
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • A fixed bolt hole for easy installation..
  • Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check Stock

HiLetgo 2pcs ACS712 30A Current Sensor Module 30A Range ACS712 Module

  • Pin 5V power supply, on-board power indicator.
  • The module can measure the positive and negative 20 amps, corresponding to the analog output 100mV / A.
  • There is no the detection current through, the output voltage is VCC / 2.
Check Stock

FainWan ACS712 Current Sensor Module Detector ACS712ELC 5A 20A 30A Amps Amperage Range (Pack of 2) (5A)

  • Pin 5V power supply, on-board power indicator.
  • The module can measure the positive and negative 20 amps, corresponding to the analog output 100mV / A.
  • There is no the detection current through, the output voltage is VCC / 2.
Check Stock