Reviews Accurate Z axis Positioning

Creality CR-10S 3D Printer FDM Upgraded Metal Extruding Unit Dual Cooling Fan Silent Motherboard Meanwell Power Supply 300x300x400mm (Orange)

  • ❤ Big Printing Size ❤ Print and show your creation up to 300x300x400 mm (11.8″ x 11.8″ x 15.8″), with a single print or split and join it in as many parts as you like..
  • ❤ Resume Printing ❤ Resume printing let your prints can be resumed from the last layer if power off or lost, saving time and reducing filament waste..
  • ❤ Upgraded Dual Z Axis ❤ Feeling in control with its upgraded dual Z Axis Leading Screws.
  • high positioning accuracy, move smoothly and print faster..
  • ❤ Suit for Everyone ❤ Affordable for both beginners and professionals with great printing quality to start your 3D printing project..
  • ❤ Satisfaction Service ❤ For technical support, please reach us via Amazon message rather than ” Creality Official Support Center “, cause our customer service will respond to you within 24 hours no matter what question..
Check Stock

Garmin 010-01772-00 Foretrex 601, 2 inches

  • Durable, constructed to military standards (MIL STD 810G).
  • Works with GPS, GLONASS and galileo satellite systems to provide accurate positioning.
  • Know where you are with navigation sensors, including 3 axis Accelerometer, 3 axis compass and a Barometric altimeter.
  • smart notifications¹ allow your Device to receive emails, texts and alerts.
  • Battery life exceeds 48 hours in navigation mode, up to 1 week in UltraTrac mode and up to 1 month in watch mode.
  • NOTE:Kindly refer to the user manual provided as a PDF manual in the product description sectio.
Check Stock

Garmin 010-01772-10 Foretrex 701 Ballistic Edition, 2 inches

  • Durable, constructed to military standards (MIL-STD-810G).
  • Works with GPS, GLONASS and galileo satellite systems to provide accurate positioning.
  • Know where you are with navigation sensors, including 3-axis Accelerometer, 3-axis compass and a Barometric altimeter.
  • smart notifications¹ allow your Device to receive emails, texts and alerts.
  • Applied Ballistics elite software that calculates aiming Solutions for long-range shooting.
  • Battery life exceeds 48 hours in navigation mode, up to 1 week in UltraTrac mode and up to 1 month in watch mode.
Check Stock

Official Creality Ender 3 S1 3D Printer, Upgraded Direct Drive FDM 3D Printers, Quick Assembly, with Auto Leveling Bed, Dual Z-axis Screws, Spring Steel Print Bed, Build Size 220x220x270 mm

  • ...ct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the “Sprite” is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Power Loss Recovery and Filament Sensor】Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides ....
Check Stock

CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor Dual Z-axis High Precision 8.6x8.6x10.6inch

  • ...th a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning..
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed..
  • Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface..
  • Ultra-Quiet 32 Bit Motherboard：The brand new 32-bit silent board runs at low decibel levels (below 50dB) and significantly reduces noise, so you can enjoy 3D printing..
  • High-precision dual Z-axis for higher printing p....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printers with 300℃ High Temperature Hotend All Metal Direct Drive Extruder, CR Touch Auto Leveling Bed, Spring Steel PEI Build Plate, Printing Size 220x220x270mm

  • ...l-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the "Sprite" is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • 【High-precision Dual Z-Axis Higher Printing Precision】Wit....
Check Stock

FlashForge Finder 3D Printers with Cloud Wi-Fi USB cable and Flash drive connectivity

  • Slide-in build plate allows printed objects to be easily removed.
  • 3.5-Inch full color touchscreen with intuitive icons makes for easy operation.
  • Sturdy, plastic alloy construction ensures stable prints.
  • Wi-Fi, usb and flash drive connectivity.Positioning Precision: 0.0001 inch on Z axis, 0.0004 inch on XY plane Resolution: 0.004 inch.
Check Stock

LulzBot KT-PR0051NA TAZ Workhorse 3D Printer

  • Belt driven Z-axis for fast cycle times and elimination of Z wobble..
  • X/Y/Z Backlash Compensation* for 3D printed part accuracy..
  • Lightweight tool head design for faster, better looking prints.
  • Pre-configured material profiles created by expert in-house technicians..
  • Dual Z-axis limit switches for automatic x-axis gantry leveling.
  • The industry’s widest array of supported materials with ready-to-print profiles.
Check Stock

Official Creality Ender 5 Plus 3D Printer with BL Touch Auto-Leveling Dual Z-Axis Touch Screen and Glass Bed Large Printing Size 350x350x400mm

  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and....
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of....
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing..
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very....
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and....
Check Stock

TRONXY X5SA PRO 3D Printer with Glass Bed Upgrade, Full Metal Frame CoreXY Printer with Auto Leveling, OSG Guide Rail+Titan Extruder+Silent Board, Large Build Volume 330×330×400mm

  • ...nsion, stable operation and printing accuracy.
  • Filament detector + Resume print function, avoid time and filament waste.
  • [Core Components] - Highly wear-resistant, silent pulley to ensure printing speed.
  • Titan extruder reduces the risk of poor extrusion, support TPU filaments.
  • Dual Z-axis and upgraded motor, precise positioning transmission, stable performance.
  • Two-way fan, maintain better cooling efficiency. Reduce errors in printing, easy to achieve high-precision printing.
  • [Interesting] - DIY assembly type industrial-home dual-purpose 3D machine, suitable for manual skills and experienced large 3D printer enthusiasts, transforming machines and building shell/parts, etc. Add more fun for your 3d printing, stronger power support and smoother transmission, get a larger and finer printed model.
  • [Service Guarantee] - Receiving the TRONXY coreXY 3D printer- Check the accessories - DIY assembly machine - Set the distance from Z-off first - then auto-leveling. Any problem, contact us for solution(Your Account>Your Orders>Contact Seller).
Check Stock