Reviews Access Point Module

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

  • The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
  • 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
  • Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock

HoTech 2' & 1.25' SCA Laser Collimator for Newtonian Telescope - Crosshair Model # SCA-2C

  • Retain only one optimal gear position brightness.
  • Standard hex wrench to self-calibrate coaxial problem.
  • The spot shape is a dot not a grainy elliptical point.
  • The module adopts high-end spherical module, high sensitivity and easy adjustment.
  • Adopts 3-piece glued optical glass lens for stable spotting better focusing effect and less halo.
  • Make the spot shape is a dot instead of a grainy elliptical point.
  • External effects of the product during transportation and use may cause off-axis problems.
  • You can calibrate the coaxial problem yourself by giving away the standard hexagonal wrench.
  • CNC precision lathe machining of the laser unit has a front opening from which the laser beam can be emitted.
  • Resistance to sudden changes in temperature difference.
  • The sudden temperature difference does not change the spot size.
  • It is resistant to extreme cold weather and can be used under extremely cold weather of minus -30 degrees Celsius without affecting the use effect.
Check Stock

FrSky Tandem X20S Transmitter with Built-in 900M/2.5G Dual-Band Internal RF Module

  • Built-in TD 900M/2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode (Compatible with ACCST Receivers with D16 V2 or later FW) 2.4G ACCESSMode (Compatible with ACCESS Receivers) 900M ACCESSMode (Compatible with ACCESS R9 868/915MHz Receivers) (*Capable of simultaneous working under ACCESS mode) 2.4G & 900M TD Mode (Compatible with TD Receivers).
  • Super-low latency and long-range control with telemetry (*Up to 50 to 100KM range and down to 4ms end-to-end latency) 800*480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons (Front) and 2 Momentary Buttons (Rear) Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs.
  • Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery (USB Type-C Interface) High-speed PARA Wireless Training System (Compatible with FreeLink App3.0) Built-in Audio Wireless Module (Compatible with Bluetooth Audio Device).
  • All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45° to 60° stcik travel and 8° rotatable panel. ETHOS: The more pow....
Check Stock

MPC Smartphone App - Remote Start App Using Your Smartphone - w/1 Year Service - for Most Remote Start Kits - Continental U.S. ONLY

  • ...ee service included, renewal - 1 Year at $39..
  • ✅ PLUG & PLAY INSTALLATION TYPE - This kit is a true Plug & Play kit. The wiring harness was designed to eliminate the need for the wiring connections. The installation of this product will still require the removal of your steering column cover or lower dash panel to access the connection point. However the connection is a simple plug-in..
  • ✅ SYSTEM REQUIREMENTS - Requires additional components such as an MPC remote start module or a standalone data bypass module to function. Compatible modules include select Crimestopper remote start units & Fortin EVO-ALL & EVO-ONE Stand-Alone data modules. Must have MPC Remote Start Kit installed. Includes first year of service free. After that renewal cost* is $39 per year. *Subject to change. NOTE: Works only with RS-Series remote starts. Does not work with LC or DS series remote starts..
  • ✅ MPC TECHNICAL SUPPORT - MPC's USA-based professional tech support staff is available to help you! Monday-Friday 9am-5pm Arizona time. You can also open a web-based support ticket 24/7..
Check Stock

Carel Temperature Thermostat IR33F0AHA0 with Temperature Sensor Probe 115V / Technician Ready by Xiltek

  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity,....
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your....
Check Stock

7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor

  • 7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
  • Capacitive touch panel, support 5-point touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
  • Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
  • DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..
Check Stock

Barska AF12654 Biometric Safe External Battery Pack,Grey

  • In the event of battery failure, this External Battery Pack can be used to access the Barska Biometric Safes by plugging it into the module on the....
  • The battery pack will supply power to the module, allowing you to access the safe with your registered fingerprints to change the batteries..
  • Compatible with Barska Safe Models: AX11224, AX11620, AX11650, AX11652, AX11898, AX11780, AX11556, AX12038, AX12408..
Check Stock

Hong TTH - Parts & Accessories 1PCS Frsky Taranis Q X7 / QX7S AA Battery Tray

  • The X7S ACCESS features 24 channels with a faster baud rate and lower latency thanks to its high-speed module digital interface. As with the rest of the ACCESS transmitters, it provides a secure and reliable link, along with wireless firmware updating making it fully compatible with our newest line of OTA receivers. The battery compartment now uses 2 18650 Li-Ion batteries and can be balance charged via the Mini USB interface..
  • The X7S ACCESS version features Hall-sensor gimbals and the PARA wireless trainer function, making it compatible with the FrSky Free Link App and AirLink S, while the wired training port is still retained..
  • Includes: Taranis X7 ACCESS transmitter and R9M 2019 Module (18650 batteries are NOT included).
Check Stock

TRENDnet 10dBi Wireless N300 Outdoor PoE Access Point TEW-740APBO Point-to-Point 2.4 GHz Multiple SSID AP WDS Client Bridge WISP IPX6 Rated Housing Built-in 10 dBi Directional Antenna

  • POINT TO POINT BRIDGE: 10 dBi Outdoor PoE Access Point with wireless N300 point-to-point networking (2.4 GHz).
  • WIRELESS N300 (2.4 GHz): The N300 Oudoor access point is compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300 Mbps.
  • WIRELESS MODES: Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP....
  • OUTDOOR READY: The PoE Access Point has a durable enclosure with an IPX6 outdoor weather rating. Operating Temperature of -20 - 60° C (-4 - 140° F).
  • DIRECTIONAL ANTENNA: The 10 dBi Access Point has a built-in 10 dBi directional antenna.
Check Stock