Reviews Abs Extruder

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

  • The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
  • Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
  • Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
  • Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
  • 100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
Check Stock

Toothpaste Tube Squeezer Dispenser Multifunctional Tube Holder Rotate Plastic Squeezer Rollers Tube Manual Extruder Clip Seat Bathroom Toothpaste Rack for Facial Cleanser Cosmetics Oily Extruder

  • Wide range of uses: toothpaste extruder is suitable for toothpaste, facial cleanser, cosmetics and other pipe products.
  • Selected material: ABS material is used for toothpaste extruder, which is heat-resistant, easy to clean, and can be used at ease.
  • Refuse to waste: our toothpaste extruder can save up to 35% of toothpaste, which is usually wasted in toothpaste tubes and other tube products.
  • Exquisite design: beautiful shape, smooth lines, simple and generous overall, delicate handle, not easy to slip.
  • Easy to use: toothpaste or other pipe materials are inserted parallel to the mouth of the rotary rod, and then the rotary rod is inserted into the....
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm

  • 【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour..
  • 【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts..
  • 【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing..
  • 【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with du....
Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

  • 【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • 【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
  • 【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
  • 【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....
Check Stock

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock

The Right to Bear 3D Printers

  • 【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC..
  • 【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch..
  • 【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint..
  • 【Latest slicer software version 6.5.1】: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algo....
Check Stock

20PCS 0.4mm MK8 Nozzles 3D Printer Extruder Nozzles + 10PCS Stainless Steel Nozzle Cleaning Needles with 2PCS Wrenches and Tweezers for Makerbot Creality CR-10 Ender 3 5

  • Package Include: This 3D printer nozzle set come with 20pcs 0.4mm printer nozzles, 10pcs 0.35mm nozzle cleaning needles, 1pcs curved tweezers, 1pcs socket wrench and 1pcs flat wrench.
  • Cleaning Needles: The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Premium Material: Our MK8 extruder nozzles are made of high quality brass material. Heavy duty and durable to use for a long time. Easy to install and change.
  • Applicability and Compatibility: These MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • Compatible With Creality Ender 3 Series 3D Printer - Creality Sprite extruder pro is compatible with creality Ender 3, creality Ender 3 v2, creality Ender 3 pro, creality Ender 3 s1, creality Ender 3 max, creality ender 3 s1 pro, creality ender 3 s1 plus 3d printer...
  • All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite m....
Check Stock

Junco Intelligent Industrial Grade 3D Printer Model X-max,5 Inch Touchscreen,WiFi Precise Printing with ABS,PLA,TPU,Flexible Filament,300x250x300mm

  • Build Volume 11. 8''x9. 8''x11. 8''(300x250x300mm).
  • Filament Types PLA, ABS, TPU, PETG, Nylon, PC, Carbon fibber, etc..
  • Full metal support more stable than plastic support.
  • Aviation aluminium, CNC machining aluminium alloy.
  • Super big desktop 3d printer, for Education Institutions for Hands-on, Project-Based Learning, Designers, Tinkerers, Hobbyists, & Home Users, Advanced....
Check Stock