Reviews Abrasive Resin Fiber Discs

Generic 3.35Inch Wood Shaping Disc 78 Inch Bore Carving Compatible with DeWalt Bosch Milwaukee Makita, Grinding for Sanding Polishing (Silver Arc Type)

  • Benchmark Abrasives 5" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction lifeline of our brand..
Check Stock

Benchmark Abrasives 7\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 60 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor zirconia resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of zirconia grains that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Benchmark Abrasives 5\ Zirconia Resin Fiber Sanding Discs for Grinding, Blending, Finishing, and Polishing 7/8\ Arbor, Stock Removal Angle Grinder Discs (25 Pack) - 36 Grit

  • Benchmark Abrasives 7" diameter and 7/8" arbor aluminum oxide resin fiber discs are commonly used for surface preparation, blending, chamfering, paint or rust removal, etc..
  • These heavy stock removal discs are ideal for tough materials like metal & stainless steel. The strong and tough design of the discs provides consistent performance..
  • The surface finishing discs have heavy-duty vulcanized fiber backing and heat-treated phenolic resins for increased strength, durability, and tear resistance. The superior design of discs minimizes loading, glazing, and grain stripping..
  • High-performance resin fiber finishing discs are compatible with an angle grinder and should only be used with a backing pad and nut. Made of aluminum oxide grain that provides sharp and clean cuts..
  • All of our abrasive products are made with quality materials and exceed both ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

NEIKO 11142A Zirconia Flap Disc | 40 Grit | 10 Pack | 4.5\ x 7/8-Inch | Bevel Type #29 | 13,300 RPM | Premium and Industrial Grade | High Performance Edge Grinding

  • [PREMIUM QUALITY]: These flap discs are constructed with industrial grade premium zirconia abrasive for strength, durability, and extended disc life as it holds up to high temperatures and pressure..
  • [STOCK REMOVAL]: Each disc is made with coarse 40 grit zirconia alumina making this abrasive flap disc ideal for aggressive grinding on hard materials like metal..
  • [BEVEL]: These Bevel Type 29 discs are angled to be more effective for contours, edge and weld blending, and radius grinding..
  • [RESIN FIBER]: The resin fiber construction complemented by the fiberglass backing plate absorbs vibrations without smearing or contaminating workpiece during usage..
  • [SPECIFICATIONS]: Each disc measures at a 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with grinders with a speed of up to 13,300 RPM..
Check Stock

SI FANG 10Pcs 4''x5/8'' Premium High Density Calcined Aluminum Oxide Flap Disc 60 Grit …

  • Premium high density calcined aluminum is characterized by hard-wearing,long life. The type 27 Abrasive grinding wheels are made with a fiberglass backing plate that effectively absorbs vibrations without smear during usage, bringing more stable and efficient grinding..
  • Designed for grinding, blending, sanding and finishing on a wide range of material. Especially suitable for stainless steel also great for mild steel. Flap discs sanding wheel are used to grind rough workpiece surfaces, fast grinding, such as valve castings, angle irons, steel plates, welds, weld scars, rust removal, deburring, etc..
  • Size:100mm x 16mm ,For use on an Angle Grinder.
  • Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs. SI FANG 80 Grit grinder grinding discs have long-lasting use..
  • Ideal for The Home, Workshop, Hobbyists, Tradesmen, Builders and DIY Enthusiasts, etc..
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • ...at generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best....
Check Stock

XSORB Chemical Neutralizer, Acids, 13 gal.

  • Resin bonded aluminum oxide abrasive is coated on a durable Xwt backing to provide maximum life.
  • Free cutting and clog resistant open coating makes cloth discs ideal for heavy stock removal.
  • Hook and Loop discs can be used on portable random orbital sanders.
  • Norton cloth sanding discs are made with aluminum oxide abrasive for long life.
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • ...at generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • ...at generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 42,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensile Strength, such as steel alloys, hard bronze, and metals..
  • Works with Variety of Tools – These cutting discs are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the perfect rotary cutter. For best....
Check Stock

GYROS 1.5” Resin Cut-Off Wheels for Rotary Tools. 12 Double Fiberglass Reinforced Cutting Discs | High-Tensile for Materials like Steel, Bronze. Dremel Cutting Tool Accessory | Made in USA 11-32156/12

  • ...neration and thin cutting line. They are made in the United States and have a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have a high working efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk HT Multi-Set is a must-have for professionals and hobbyists looking for the best Dremel and other top-brand rotary tool accessories..
  • High Tensile Strenght – Gyros HT mini cutting discs are designed to cut all hardened and softened steels, steel alloys, hard bronze, and metals. Because the abrasive is perfectly matched to the materials being cut, the cutting action is superior. LT stands for Low-Tensil Strength, which includes materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. ST for Super-Tensile Strenght materials such as stainless and titanium..
  • Works with Variety of Tools – These cutting disks are compatible with a wide range of rotary cutting instruments, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 40-00470 is compatible. For your saf....
Check Stock