Reviews A Mortise Lock Body

PRIME-LINE E 2014 Mortise Lock - Adjustable, Spring-Loaded Hook Latch Projection for Sliding Patio Doors Constructed of Wood, Aluminum and Vinyl, 3-11/16”, 45 Degree Keyway, Round Face

  • REPLACe OLD OR BROKEN DOOR LOCKS – When your sliding door mortise lock is broken or old, don’t replace the door entirely, just get a new PRIME-LINE E 2014 Mortise Lock!.
  • FOR SLIDING DOORS – This Mortise Lock can be used on sliding patio doors constructed of wood, aluminum and vinyl. Also fits doors using W&F manufactured handles..
  • EASY INSTALLATION – Installation is quick and easy – working sliding door locks are well within reach. Mounting Flanges have 6-32 tapped thread..
  • 45 DEGREE KEYWAY - This E 2014 mortise lock has a 45-degree angled keyway position when in the locked position..
  • PRODUCT INFO - The mounting hole centers of this lock measures 3-11/16” from center to center, and the rear housing corners are square. Mortise lock dimensions are: 1.125"(D)x0.5"(W)x3.688"(H)..
Check Stock

Prime-Line Products E 2294 Mortise Keyed Brass Knob – Perfect for Replacing Broken Antique Lock Sets and More Fits 1-3/8 inch-1-3/4 inch Interior Doors single pack

  • BREPLACe ANTIQUE MORTISE LOCK SETS – The vintage look of the Prime-Line E 2294 Mortise Lock Assembly Kit is a great match for the old lock sets found in period homes. Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. .Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit..
  • EASY INSTALLATION – Installation is quick and easy, and all mounting screws are included. The mortise lock easily slides into the existing door pocket for an fix for a broken lock. It has a 2-3/8” backset with a 9/32” square spindle drive that accepts a maximum spindle size of 1/4”..
  • STEEL WITH BRASS-PLATED FINISH – The E 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish. The kit includes a latch and deadbolt strike with fasteners (door knobs, square spindle, spare keys and trim plates sold separately) and two skeleton-style keys..
  • LEFT OR RIGHT-HANDED INTERIOR DOORS – The mortise caselock ships handed (to close in a certain direction) but the latch can easily be reversed for opposite swinging doors..
  • INSTALLATION TIP – Although the square drive on the latch has a 9/32” opening, it will only accommodate 1/4....
Check Stock

AIsecure Brass Mortise Cylinder with 2 Keys for SC Keyway Standard Commercial Door Lock Cylinder Keyed Alike for Storefront Doors Lock Replacements, 2 Pack, Silver

  • 【Premium Quality with Satin Chrome Finish】This mortise door lock cylinder is made of premium solid brass with a shiny satin chrome finish..
  • 【Sturdy & Anti-Corrosion】The upgraded sturdiness and anti-corrosion feature ensures this mortise lock cylinder is more durable, secure, and strong for long-term use..
  • 【Universally Fit】This door lock cylinder is one of the most common see styles, suitable for most storefront commercial aluminum doors..
  • 【Size Information】1-Inch body length, including 5/16-inch stamped trim ring..
  • 【Package Includes】Brass Cylinder x 2, Matching SC Keyway Key x 2, Stamped Trim Ring x 2.
Check Stock

Schlage FE285 CEN 622 LAT CEN Century Front Entry Handleset with Latitude Lever, Lower Half Grip, Matte Black

  • ☛【 COST EFFECTIVE TO REPLACe OLD OR BROKEN DOOR HANDLES】: When your door handle is broken, old or unsightly, don’t replace the door entirely, just get a new sliding patio door handle set! Our replacement patio door handle + mortise patio door / sliding door lock set is the most economical and useful you can find..
  • ☛【INCLUDES】: Interior Handle, Exterior Pull,Mortise lock, Thumb Latch, 6XScrews. Standard reversible, non-handed handle set that can be mounted on both left-handed and right-handed sliding patio doors. 45° Mortise latch lock which can be used on sliding patio doors constructed of wood, aluminum and vinyl.You don't need to buy other components if you get our handle set..
  • ☛【EASY INSTALLATION】:This is a DIY project in the box. For handles with 3-15/16” hole spacing & a Mortise (Latching style) lock. Remove 2 screws from existing handles, insert Latch, align inside and outside handles with Pre-drilled door holes, insert screws, tighten and your done. Includes 6 screws with 3 different sizes: Large 2.16.
Check Stock

Nostalgic Warehouse Egg & Dart Plate with Keyhole Round Clear Crystal Glass Knob Mortise - 2.25 Antique Brass

  • Traditional mounting for vintage or new doors. Complete set including mortise lock and skeleton keys 2 1/4 inch standard back set..
  • Coordinates with Nostalgic Warehouse's Premium Grandeur line.
  • Standard door thickness range is 1-3/8-Inch to 1-3/4-Inch.
  • This antique reproduction set is meant to replace skeleton-key lock boxes or for specialized new doors with a mortise box preparation.
  • Traditional mounting for vintage or new doors. Complete set including mortise lock and skeleton keys 2 3/8 inch standard back set..
Check Stock

Prime-Line C 1280 Mortise-Style Sliding Door Handle Set – Replace Old or Damaged Door Handles Quickly and Easily –For Right- or Left-Handed Doors - White Diecast, 3-15/16” Mounting Holes

  • ☛【 COST EFFECTIVE TO REPLACe OLD OR BROKEN DOOR HANDLES】: When your door handle is broken, old or unsightly, don’t replace the door entirely, just get a new sliding patio door handle set! Our whole set replacement patio door handle + mortise patio door / sliding door lock with key is the most economical and useful you can find..
  • ☛【INCLUDES】: Interior Handle, Exterior Pull with Key Cylinder,Mortise lock, Thumb Latch, 6XScrews. Standard reversible, non-handed handle set that can be mounted on both left-handed and right-handed sliding patio doors. 45° Mortise latch lock which can be used on sliding patio doors constructed of wood, aluminum and vinyl.The Exterior Pull has key cylinder in it and you can lock the door from outside.You don't need to buy other components if you get our handle set..
  • ☛【EASY INSTALLATION】:This is a DIY project in the box. For handles with 3-15/16” hole spacing & a Mortise (Latching style) lock. Remove 2 screws from existing handles, insert Latch, align inside and outside handles with Pre-drilled door holes, insert screws, tighten and your done. Includes 6 screws with 3 different sizes: Large 2.16.
Check Stock

Sliding Patio Door Handle Set with Key Cylinder and Mortise Lock, Full Replacement Handle Lock Set Fits Door Thickness from 1-1/2\ to 1-3/4\，3-15/16” Screw Hole Spacing, Reversible Design(Non-Handed)

  • ☛【 COST EFFECTIVE TO REPLACe OLD OR BROKEN DOOR HANDLES】: When your door handle is broken, old or unsightly, don’t replace the door entirely, just get a new sliding patio door handle set! Our whole set replacement patio door handle + mortise patio door / sliding door lock with key is the most economical and useful you can find..
  • ☛【INCLUDES】: Interior Handle, Exterior Pull with Key Cylinder,Mortise lock, Thumb Latch, 6XScrews. Standard reversible, non-handed handle set that can be mounted on both left-handed and right-handed sliding patio doors. 45° Mortise latch lock which can be used on sliding patio doors constructed of wood, aluminum and vinyl.The Exterior Pull has key cylinder in it and you can lock the door from outside.You don't need to buy other components if you get our handle set..
  • ☛【EASY INSTALLATION】:This is a DIY project in the box. For handles with 3-15/16” hole spacing & a Mortise (Latching style) lock. Remove 2 screws from existing handles, insert Latch, align inside and outside handles with Pre-drilled door holes, insert screws, tighten and your done. Includes 6 screws with 3 different sizes: Large 2.16.
Check Stock

Patio Door Handle Set + Mortise Lock 45° Perfect Replacement for Sliding Glass Door Fits 3-15/16” Screw Hole Spacing, Non-keyed with Mortise Latch Locks,White Diecast,Reversible Design(Non-Handed)

  • ☛【 COST EFFECTIVE TO REPLACe OLD OR BROKEN DOOR HANDLES】: When your door handle is broken, old or unsightly, don’t replace the door entirely, just get a new sliding patio door handle set! Our replacement patio door handle + mortise patio door / sliding door lock set is the most economical and useful you can find..
  • ☛【INCLUDES】: Interior Handle, Exterior Pull,Mortise lock, Thumb Latch, 6XScrews. Standard reversible, non-handed handle set that can be mounted on both left-handed and right-handed sliding patio doors. 45° Mortise latch lock which can be used on sliding patio doors constructed of wood, aluminum and vinyl.You don't need to buy other components if you get our handle set..
  • ☛【EASY INSTALLATION】:This is a DIY project in the box. For handles with 3-15/16” for 2 screw distance & a Mortise (Latching style) lock. Remove 2 screws from existing handles, insert Latch, align inside and outside handles with Pre-drilled door holes, insert screws, tighten and your done. Includes 6 screws with 3 different sizes: Large 2.16.
Check Stock

FPL #3-45-S Sliding Glass Door Replacement Mortise Lock, 3-11/16” Screw Holes, 45 Degree Keyway

  • Easily replaces many vinyl, aluminum, and wooden sliding door mortise locks (See dimension photo).
  • Durable all steel mortise lock- No die-cast zinc components.
  • Round end face plate, Adjustable hook, 45 degree hub, 3-11/16” Screw holes.
  • Package includes mortise lock, keeper / strike, and installation hardware.
Check Stock

Mortice Lock

  • NEW INSTALLATION FIT – This lock set is perfect for interior doors with a 2-3/8" backset. INSTALLATION TIP - Use of thread locking adhesive on the set screw will keep knob from slipping.
  • BEAUTIFUL, TRADITIONAL GLASS KNOB LOCK SET - The E 2497 glass knob set is the perfect choice for replacing or updating interior door hardware. With a classic bronze plated steel trim and beautiful glass knob, it’s the perfect choice for your next project..
  • LEFT OR RIGHT HAND INSTALLATIONS – The steel case mortise assemblies can be used for left or right hand installations, and can easily be installed on new and vintage doors..
  • REPLACe ANTIQUE LOCK SETS – This E 2497 Mortise lock set is the perfect choice for replacing knobs on old doors. No matter what interior door you’re fixing, this classic lock set will add the perfect finishing touch..
  • LOCK BOLT KEY – This entry door lock set is perfect as a privacy lock on bedrooms, bathrooms and other interior doors - the lock bolt is key activated from both the inside and outside..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
Check Stock