Reviews 7 Segment Led Display
AOICRIE 2PCS MAX7219 Dot Matrix Module for Arduino Microcontroller 4 in 1 Display with 5pin Line for Arduino for Raspberry Pi (Green)
- ★The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
- ★The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
- ★Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
- ★Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
- ★The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..
Check StockALAMSCN MAX7219 Dot Matrix Module 32x8 4 in 1 LED Display Modules for Arduino Raspberry Pi Microcontroller with 5Pin Wires Red (Pack of 2)
- The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
- Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
- Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
- The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
- The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..
Check StockG-MARK MK800MP3 Professional Audio mixer Console 8 channels with MP3 Player +48V Phantom Power USB Bluetooth Reverb for stage
- 8 channel mono input with 48V phantom power supply..
- USB input, with lyrics display, 7-Bit LED display..
- built-in analog effects with LED display.
- can be connected to digital effects peripherals.
Check StockPyle PS900 Audio/Video AC Power Conditioner, Voltage Filter, Noise/Interference Elimination, Processor Sequencer with 3-Prong Outlet Plugs
- Supplies Clean Filtered AC Power: 2-Stage High Insert Dissipation - AC Voltage, Ambient Temperature & Step Time Display.
- Micro-Controller Ensures High Level Precise Timing - Built-in 2 Stage EMI Filter for Each Output (On Rear Panel).
- Able to Series Link More than 100 Units with Automatic Master Unit Display - Selectable Step Time and Real Time Display.
- Output Cut Switch for All Nine Channels - Monitors AC Voltage in Real Time - Display Shows Wiring and Ground Status.
- LED Displays: Output Cut, Master, Bypass, Power, AC Voltage and Temperature - Step Time Display in 7 Segment LED.
Check Stockuxcell Common Cathode 10 Pin 2 Bit 7 Segment 0.59 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs
- Panel Size: 15 x 14 x 7.2mm / 0.59" x 0.55" x 0.28" (L*W*H).
- Total Size: 15 x 14 x 13.5mm / 0.59" x 0.55" x 0.53" (L*W*H).
- Package Content: 5 x LED Digital Display Tube.
Check Stockuxcell Common Anode 10 Pin 2 Bit 7 Segment 0.59 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs
- Panel Size: 15 x 14 x 7.2mm / 0.59" x 0.55" x 0.28" (L*W*H).
- Total Size: 15 x 14 x 13.5mm / 0.59" x 0.55" x 0.53" (L*W*H).
- Package Content: 5 x LED Digital Display Tube.
Check Stockuxcell Common Cathode 12 Pin 4 Bit 7 Segment 1.18 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs
- Panel Size: 30 x 14 x 7.2mm / 1.18" x 0.55" x 0.28" (L*W*H).
- Total Size: 30 x 14 x 13.5mm / 1.18" x 0.55" x 0.53" (L*W*H).
- Package Content: 5 x LED Digital Display Tube.
Check Stockuxcell Common Cathode 11 Pin 3 Bit 7 Segment 0.89 x 0.55 x 0.28 Inch 0.35\ Red LED Display Digital Tube 5pcs
- Panel Size: 22.5 x 14 x 7.2mm / 0.89" x 0.55" x 0.28" (L*W*H).
- Total Size: 22.5 x 14 x 13.5mm / 0.89" x 0.55" x 0.53" (L*W*H).
- Package Content: 5 x LED Digital Display Tube.
Check Stock4-Digit 7-Segment LED Display Clock Module with TM1637 IC Compatible with Raspberry Pi Arduino (Blue LEDs)
- [Specifications] This is a basic 4-digit 7-segment Led display clock module, the LEDs are blue..
- [Compatibility] This clock module uses TM1637 IC, it compatible with Raspberry Pi and Arduino.
- [Easy to Use] The clock module connected to digital I/O via 2 pins..
- [Easy to Install] This LED display designed with 4 mounting holes for easy installation..
- [High Quality] The clock module is made of high quality electronic components, stable and reliable performance.
Check StockSWAT-Tourniquet, Orange
- Measuring Range: -100 to +100 Pascals with 4-20 mA O/P.
- Display: Integrated 4 Digit Red LED 7 Segment Display 0.5”.
- Maximum Over Pressure : 2 Times the rated pressure.
- Construction: Aluminium LM-6 Powder Coated Body with Flush Bezel Fitment.
- Water Splash Proof Polycarbonate Front Sticker.
- Sensor Type : Integrated High Speed Differential Pressure Sensor.
- Alarm Type : Built in Buzzer Alarm for Process Violation Alert.
- Accessories: Instruction Manual, Adapter, Calibration, Traceability.
- Application: Hospital, Clean Room, Pharmaceutical, Isolation Room.
Check Stock