Reviews 6800xt Card

PXY-ELEC Complete Mining rig System. BTC-X79-5 Mining Motherboard 5 PCI-E 3.0 Graphics Card Slots, Including CPU, SSD,(8G) RAM, PSU, Support 3060GPU Full Speed ETH Miner (Without GPU 8G RAM)

  • BTC-X79-5 card mining machine is optimized for 3060 LHR v1, and the single card computing power of 3060 graphics card is as high as 48MH/s or more. The noise during operation is around 55db. It runs very quiet, very suitable for home use ，X79-5 card mining machine motherboardsupports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards.
  • This is a complete set of miners (note no GPU), it already contains: x79 motherboard, intel 2609 v2 CPU, 8GB RAM, 128GB SSD, 1800w power supply, 6 PIN cable to (6+8) Pin*5pcs, 3 Fan, metal frame. Lifting kit, only need to prepare graphics card, monitor, mouse, keyboard to run..
  • X79-5 card mining machine main board adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. Note the width of the graphics card. When using hiveos to start, enter the BIOS to set the U disk to start, wait 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
  • If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2, etc. You can also install additional layers, each miner is equipped with parts.
Check Stock

2000W Mining 2U Single Channel Power Supply, 110-230V Ethereum PSU for 8 GPU ETH Miner Rig Case

  • ...he motherboard and other cable consumption..
  • 【Support 6-8 GPU graphics card】 Built in 60mm diameter cooling fan, with speed up to 12000 rpm, Which is conducive to heat dissipation. But the sound will be loud decibel: about 65-69 DB at no load. Support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPUs simultaneously. We recommend running 6 cards of 3080/3090 without overclocking the GPU..
  • 【Package】 Include 1.2m power cord, cable tie, screw. Over voltage protection, overloading protection, short circuit protection..
  • 【Service】 3 months warranty. To make the power supply have a longer life, it is recommended to clean the power supply fan frequently. If you have any question, just feel free to contact me..
Check Stock

EZDIY-FAB PCIE Gen 4 16x Extreme Flexible, High Speed Riser Cable PCI Express 4.0 Port GPU Extension Card-Right Angle Connector [7.87in/20cm]

  • High stability and full PCIe Gen4 x16 speed, plug and play.Backward-compatible with PCIE 3.0/PCIE 2.0/PCIE 1.0..
  • Right angle connector avoid pressing the cable, stable transmission, easy to install..
  • Advanced technology of ultra soft cable features as a 7.87in/200mm slim, flat and foldable design for better cable management combining elegance with functionality.
  • Re-designed cables and connectors, ensure minimal signal delay and electromagnetic interference-free operation..
  • Compatible with graphics cards - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, and MORE / Chipset - X570, B550, Z690, B660 and future new Gen4 GPUs & Chipsets.
Check Stock

OUCAXIA PSU 8 Pin to 6+2 Pin PCIE Cable, Male to Male GPU Sleeved Cable for Corsair Thermaltake ARESGAME Pystar Modular Power Supply (65cm)

  • 1. UL1061 18AWG tinned copper core with U-shiped high current terminal & up to 10A, full length 65cm (including interface)..
  • 2. Compatible with CORSAIR Modular PSU: AX1600i(TITANIUM), AXi, AX(TITANIUM & PLATINUM), HXi, HX(PLATINUM & GOLD), RMi, RMX, RM, SF, CS-M, CX-M, TX-M..
  • 3. Compatible with Thermaltake Modular PSU: RGB GOLD, RGB PLATINUM, ARGB GOLD, Toughpower TF1 GF1 PF1..
  • 4. Compatible with ARESGAME Modular PSU: AGK750, AGK850, AGT1000, AGS750, AGS850. Compatible with Pystar PSU: ES850, ES1000.
  • 5. Not compatible with CORSAIR PSU: AX1200, AX(GOLD), HX(BRONZE & WHITE). Not compatible with other brands of modular power supplies!.
  • 6. [ PACKAGE LIST : 1x GPU power cable, 2x cable combs. ] & [ SERVICE : Support 30 days no reason to replace or refund, support 2 year warranty. ].
  • 7. Please insert the [PSU] single male into the Modular Power Supply.
  • Please insert the [PCI-E] into the GPU (graphics card)..
  • 8. Supports power for GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3060, RTX3070, RTX3080 Ti, RTX3090 Ti, RX570, RX580, RX590, RX5700 XT, RX6700 XT, RX6800 XT, RX6900 XT..
Check Stock

PCIE Cable for EVGA, 65cm Male to Male 8 Pin to Dual 6+2 Pin GPU Power Cable for EVGA G+ G2 G3 G5 G6 GA GM GT P2 P3 P5 P6 P+ T2 (65cm+15cm)

  • 1. UL1007 18AWG tinned copper with U-shiped high current terminal & up to 10A, full length 65cm (25''), the extension cable length is 15cm..
  • 2. Only compatible with EVGA Super Nova PSU: G+ 650, 750, 850, 1000, 1300, 1600.
  • 3. Only for EVGA PSU is in the compatibility list above, not compatible with other brands of modular power supplies!.
  • 4. Please insert the [PSU] single male interface into the EVGA PSU's VGA port, please insert the dual 6+2 Pin [PCIE] interface into the GPU (GRAPHICS CARD)..
  • 5. Supports power for all graphics cards listed after 2015, such as: GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3060, RTX3070, RTX3080, RTX3090, RX570, RX580, RX590, RX5700 XT, RX6700 XT, RX6800 XT, RX6900 XT..
Check Stock

Sonnet AMD Radeon RX 6800 XT Graphics Card

  • RDNA 2 architecture delivers up to 65% more performance per watt over previous generation RDNA, with 80 compute units, 128 MB of Infinity Cache and 16GB of GDDR6 memory.
  • Features four display connections: one HDMI 2.1, two DisplayPort 1.4, and one USB-C Alt-Mode.
  • Supports 4K, 5K, and even the 6K Apple Pro Display XDR. Compatible with LG Ultra Fine 4K and 5K Displays.
  • Cuts application task times: Cutting edge performance improvements over previous generation GPUs enable greater graphics acceleration to significantly improve editing, rendering, color grading, animation, and special effects performance..
  • Sonnet AMD Radeon RX 6800 XT Graphics Card - Compatible with macOS 12 and 11.
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw

  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1).
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases.....
Check Stock

GIGABYTE AMD Radeon RX 6800 XT Gaming OC 16G Graphics Card, 16GB of GDDR6 Memory, Powered by AMD RDNA 2, HDMI 2.1, WINDFORCE 3X Cooling System, GV-R68XTGAMING OC-16GD

  • Integrated with 16GB GDDR6 256-bit memory interface.
  • WINDFORCE 3X Cooling System with alternate spinning fans.
  • Boost Clock: up to 2285 MHz (Reference card: 2250 MHz).
  • Game Clock: up to 2045 MHz (Reference card: 2015 MHz).
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 B550 Z690 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket{20cm} 3.0 Gen3 Compatible

  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets..
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount..
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity..
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
Check Stock

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock