Reviews 5w Stereo Amplifier Circuit

AITRIP 4pcs M38 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module Compatible with Arduino Raspberry Pi

  • This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be....
  • Package Includes: 4pcs M38(HW-406) Wireless Bluetooth MP3 Audio Receiver Board.
  • Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium....
  • Support USB sound card, free drive (plug and play). Connect the module to the computer with a USB cable, and the computer can play music through the....
Check Stock

Topping PA5 Fully Balanced Power Amplifer 140w×2 TRS×2 Input Speaker Terminal Output Class D Power Amp HiFi Amplifiers (Black)

  • 【Fully Balanced Amplifier】The newly developed Class D amplification circuit uses multiple novel optimization techniques to fully push the performance and output power to the maximum. The new circuit provides crisp, clean and deep sound with completely inaudible noise floor. The fully balanced structure makes PA5 no more hum, no more noise, no more ground loop..
  • 【Distortion Is as Outstanding as DAC】.
  • 【High Output Power】PA5 could output 140W×2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%, outout power will be 125W×2 at 4ohm load. The high output power and low distortion on load are sufficient for most speakers and applications..
  • 【Low distortion & Noise】Zero pop noise or thumping during turn-on or turn-off. Over-voltage, under-voltage, short-circuit, over-current, over-heat protection are complete..
  • 【PA5+E50+L50】This is a fully functional combination. When you need a more comprehensive system, we recommend a combination of PA5 power amplifier, E50 DAC, and L50 headphone amplifier. In this way, there are corresponding equipment from the digital audio s....
Check Stock

DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub

  • Parameters: DROK audio amplifier board working voltage is DC 8-26V, can be powered by 12V, 24V.
  • output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
  • Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
  • Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
  • Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity leve....
Check Stock

[Upgraded]AIYIMA A01 Pro 100W x 2 Amplifier Bluetooth 5.1 Class D Integrated Amp TPA3116 2.0/2.1 Channel Power Amplifier Receiver with 3.5mm AUX Output DC12-24V with DC 24V Power Adapter

  • 【3.5mm AUX output】Bluetooth 5.1/Stereo RCA input ways,Add 3.5mm AUX Line output design,can connect next active device(Such as amplifier,Active subwoofer,Active speaker).
  • 【The chipsets are high quality designs】The Qualcomm chip uses QCC3034 Bluetooth 5.1 supporting APT-X HD and LDAC, these are the highest quality BT codecs for hi-res streaming music.
  • 【With DC24V Power Adapter】This AIYIMA A01 Pro Stereo Audio Amplifier Receiver input power DC 15-24V,A01 Pro Power Bluetooth Amplifier Package with DC 24V power adapter,With Bass & Middle & Treble control.
  • 【Multiple Channel】2.0 channel/2.1 channel multi Channel Output,100W+100W(4 ohms, 20 Hz - 20 kHz, 0.04% THD),Use 2pcsTexas Instruments TPA3116D2 chip.The TPA3116D2 are stereo efficient and digital amplifier power stage for driving speakers.
  • All aluminum alloy shell,heavy gold PCB,Build quality is surprisingly solid,Nice touch!The power circuit is completely separate from the audio circuit, Minimizing interference for clear sound.
Check Stock

2 Pieces Audio Amplifier Board Pam8406 Mini Amplifier Board Dc 5v, 5w+5w Amplifier Module, Digital Power Module Class D 2.0 Dual Channel Audio Stereo Amplify Board for DIY Sound System

  • PAM8406 amplify module: working voltage: DC 5V.
  • Output power: 5W (2Ω 5V)/3W (4Ω 5V)/1.8W (8Ω 5V).
  • Characteristics: audio amplifier board has an efficiency of over 90%, which will extend the battery life and can be applied to portable applications.
  • The PAM8406 provides comprehensive protection against faults with short-circuit protection and thermal protection.
  • Reliable quality: PAM8406 amplifier module is made of noble black immersion gold circuit board, compatible with KEMET audio capacitor, filter capacitors with large capacity per channel.
  • Pure copper and gold-plated audio input terminals are included.
  • Applications: digital power amplifier board is widely applicable to LCD TVs, Mutimedia speakers, AM/FM system and DABs.
  • Package contents: you will get 2 pieces of audio amplifier boards, sufficient quantity to meet your various demands.
Check Stock

Audio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY

  • Parameters: DROK audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input..
  • Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
  • High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression..
  • Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection.
  • Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level).
Check Stock

Skar Audio SVR-10 D4 10" 1600 Watt Max Power Dual 4 Ohm Car Subwoofer, 10" - Dual 4 Ohm

  • This circuit uses two TDA2050 mono power amplifier integrated circuits.
  • 32-Watt Stereo Power Amplifier Using Two TDA2050V Integrated Circuits.
Check Stock

NAD C368 Integrated Amplifier

  • Audiophile integrated amplifier with a hybrid circuit design.
  • Vacuum tube input stage and solid state output stage.
  • Built-in DAC and oversize toroidal transformer.
  • Playable Digital Formats: WAV, FLAC, APE, LPCM, MP3, ACC, AC3, WMA.
  • Inputs: 2 x Stereo RCA, 1 x optical, 1 x Coax - Outputs: 1 x Stereo Rec Out, 1 x Stereo Pre Out, 2 x 2 Speaker terminals, 2 x Power Control (3.5 mm....
Check Stock

Vincent Audio SV 200 Hybrid Integrated Amplifier - Black

  • Audiophile integrated amplifier with a hybrid circuit design.
  • Vacuum tube input stage and solid state output stage.
  • Built-in DAC and oversize toroidal transformer.
  • Playable Digital Formats: WAV, FLAC, APE, LPCM, MP3, ACC, AC3, WMA.
  • Inputs: 2 x Stereo RCA, 1 x optical, 1 x Coax - Outputs: 1 x Stereo Rec Out, 1 x Stereo Pre Out, 2 x 2 Speaker terminals, 2 x Power Control (3.5 mm....
Check Stock

Kicker KICKER 48KMA6006 600 Watt 6-Channel Marine Amplifier Boat Amp KMA600.6

  • PREMIUM 4 CHANNEL AMPLIFIER: Pyle’s PLMRA400 is engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and be universally compatible with a variety of head units.
  • RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.
  • SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
  • POWERFUL 400 WATT: This amplifier is powerful with its 100 WATT x 4 max or 400 WATT and dual MOFSET power supply. Comes with dual adjustable input GAIN level controls between 1-300mV and 4 or 8 Ohm speaker impedance.
  • MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use.
  • 1 YEAR WARRANTY: We guarantee this hydra marine amplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee.
Check Stock