Reviews 5v Motors

Dr. Prepare Tower Fan Oscillating Fan, Portable USB Desk Fan with 270° Tilt, 3 Speeds, 3 Auto-Off Timer, and 105° Oscillation for Cooling Bedroom, Office, Dorm, Home, Camping, and Travel, 15 inch

  • 【Dual Powerful Motors】Engineered with two powerful motors, which is more powerful than bladeless fans, to double the volume of airflow for maximum comfort. By offering 3 variable speeds, this tower fan is sure cooling you off with the right amount of wind..
  • 【Blows in Multi-Direction】The new 15″ powerful desk fan boasts pivoting and oscillation design. You can tilt each fan for up to 270° up or down to point at angle precisely where you need cool relief. Plus, the 105° horizontal oscillation helps to distribute airflow left to right for added comfort..
  • 【Desk-Friendly Size】Standing 15 inches tall, this sleek table fan comes with a small footprint to fit in your cooling bedroom, home, office, living room, indoor space, desk, nightstand, or kitchen counter perfectly and delivers plenty of cooling power for personal use..
  • 【5V 3A USB Input】The USB input port opens up new possibilities of keeping you refreshed on muggy days. 【*Please be sure to use the included 5V/3A wall adapter.】or plug the fan into a power bank using your own 5V 3A USB-C cable and a cool breeze can kick off wherever you go..
  • 【3 Auto-Off Timer】The built-in programmable timer allows you to set your desk fan to automatically shut off after 2, 4, or 8 hours.....
Check Stock

VOLADOR USB Table Fan, Portable Personal Mini Desk Fan, PC/Laptop Cooling Fan for Home, Office, Travel (Touch Control, Dual Motor Driver, Double Blades, Whisper Quite)-Black

  • TOUCH CONTROL: Features a intelligent touch switch on the top of cylinder. Gently touch it to enjoy cool wind..
  • DOUBLE MOTORS & BLADES: 3 blades in front 5 blades in rear rotate in opposite directions and driven by different motors to produce powerful breeze at low noise..
  • USB POWER SUPPLY: with a a standard 5V USB port, you can connect the fan with a power bank, laptop, PC or any other usb power adapters..
  • COOL DESIGN: Modern and stylish cylinder appearance. The aluminum handle supports 135 degree adjustment for perfect angle..
  • QUITE OPERATION: adopting ultra quiet motors, the fan produces noise below 40dB while working. 25% quieter and 30% more powerful than similar models..
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

Kiro&Seeu L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Compatible with Arduino Duemilanove Raspberry Pi

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip..
  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel..
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove..
  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter..
  • Multi-function, easy to operate, a strong driver library support and feature updates..
Check Stock

Hobbywing Hobby Wing 30120000 Quicrun 1625 Brushed ESC Vehicle Speed Controller (1/18 Scale)

  • Kev rating/T Count: 2S LiPo: rpm≤30000.
  • Vehicles: 1/16th, 1/18th touring cars/buggies/monster trucks.
Check Stock

Drone Follows Me Everywhere

  • ... Long Flight Time】: Come with 2 intelligent batteries which support up to 50 minutes flight in total. Please charge the battery with 5V/3A or 5V/2A wall charger. It takes about 6.5 hours to fully charge the battery..
  • 【Level 6 Wind Resistance】: The low noise brushless motors plus the level 6 wind resistance provide you a quieter and stable flight experience. Its ability to hover in one spot without worrying about it moving around makes filming simple and enjoyable as you watch on your phone..
  • 【9800ft Video Transmission】: The F7GB2 drone has extended video transmission range up to 3km/9800ft, providing you crisp images and smooth video..
  • 【Safe to Fly and Back】: F7 drone will return to home automatically when the signal is lost, low battery or the Return to Home is pressed. Don't have to worry about losing your drone..
Check Stock

Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board

  • TB6612 motor driver with 1.2A per channel.
  • 2 full H-bridges means you can drive 2-4 solenoids (only two can be active), two DC motors bi-directionally, or one stepper motor..
  • Runs at 2.7V-5V logic. The motor & logic voltage are separate..
  • Good for motor voltages from 4.5V up to 13.5V.
Check Stock

MELIFE 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

  • Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge).
  • Great for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove. If driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits.
Check Stock

Stepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping 5V 2.5A

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO).
  • Integrates 5V regulator, allows providing power to Raspberry Pi.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Adjustable motor drive current via potentiometer, maximum 2.5A current output.
  • Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use.
  • Onboard multi connector options for stepper motors in different specifications.
Check Stock