Reviews 50mm Killflash

Aimpoint Screw-in killFlash ARD for 30mm Sights - 12239

  • The killFlash ARD (Anti Reflection Device) is designed to eliminate potentially compromising reflections from the objective lens.
  • Compatible with the Aimpoint Comp, PRO, ACO, and 9000 series red dot sights.
  • Honeycombed design offers anti-glint and anti-glare protection for your lens as well as from dirt, sand, and grime.
  • Fits the Aimpoint Lens Cover (Sold Separately).
Check Stock

Trijicon ACOG 4 X 32 Scope Dual Illuminated Horseshoe Dot .223 Ballistic Reticle, Green

  • BATTERY-FREE ILLUMINATION: Features a tritium/fiber optic illuminated reticle that automatically adjusts the brightness based on available light.
  • RUGGED ALUMINUM-ALLOY HOUSING: Forged 7075-T6 aircraft-aluminum-alloy housing provides for a nearly indestructible sighting system.
  • COMBAT PROVEN: No other magnifed optic has been used more in combat than the ACOG.
  • BULLET DROP COMPENSATING & RANGING RETICLES: The green Horseshoe reticle ranges out to 800 meters for 5.56 (.223 cal).
  • Thumb Screw Flattop Adapter (for mounting to pica tinny rail), Thumb Screw (for mounting to carry handle), killFLASH Anti-Reflection Device, Scopecoat, Lenspen, Lanyard Assembly for Adjuster Caps, Trijicon Logo Sticker.
Check Stock

Tenebraex KillFlash Anti-Reflection Device for IOR, Nightforce, Trijicon, and Bushnell (50NFCC-ARD)

  • FITS SELECt SCOPES: IOR, Nightforce, Trijicon, and Bushnel. Please refer to sizing chart below for additional compatibility details. Scope cover compatible.
  • TACTICAL TOUGH: Constructed with hard thermoplastic that is resistant to chemicals, abrasion, and fatigue.
  • SEE NOT SEEN: XLUME coating on the honeycomb tubes is one of the secrets to the killFLASH ARD’s great performance. XLUME has a fine microstructure that captures the grazing light rays from light sources just out of your optic’s field of view.
  • PROTECT YOUR OPTICS: These anti-reflection devices offer “anti-glint” capability while protecting glass on your optic from sand, dirt and grime.
  • CAMOUFLAGE YOUR OPTICS: ARDs (Anti-Reflection Devices) use a high-tech honeycomb material and unique geometry to provide a low-cost, retrofittable and field practical way to hide reflections from optical surfaces without loss of resolution and with minimal light loss.
Check Stock

Tenebraex KillFlash Anti-Reflection Device for Hawke, Leica, Noblex, Sig Sauer, Swarovski, and Vortex (VV0050-ARD)

  • FITS SELECt SCOPES: Hawke, Leica, Noblex, Sig Sauer, Swarovski, and Vortex. Please refer to sizing chart below for additional compatibility details. Scope cover compatible.
  • TACTICAL TOUGH: Constructed with hard thermoplastic that is resistant to chemicals, abrasion, and fatigue.
  • SEE NOT SEEN: XLUME coating on the honeycomb tubes is one of the secrets to the killFLASH ARD’s great performance. XLUME has a fine microstructure that captures the grazing light rays from light sources just out of your optic’s field of view.
  • PROTECT YOUR OPTICS: These anti-reflection devices offer “anti-glint” capability while protecting glass on your optic from sand, dirt and grime.
  • CAMOUFLAGE YOUR OPTICS: ARDs (Anti-Reflection Devices) use a high-tech honeycomb material and unique geometry to provide a low-cost, retrofittable and field practical way to hide reflections from optical surfaces without loss of resolution and with minimal light loss.
Check Stock

1-3/4 Internal Retaining Ring (5 pieces)

  • 13 sizes Metric External Retaining Ring E-Clip Assortment Set total 450pieces.
  • Kit 13 various sizes contains: 1.5mm(50PCS), 2.0mm(50PCS), 2.5mm(50PCS) 3.0mm(50PCS),4mm(50PCS), 5mm(50PCS), 6mm(30PCS), 7mm(30PCS), 8mm(20PCS),9mm(20PCS),10mm(20PCS),12mm(20PCS),15mm(10PCS).
  • External circlip for retension of bearings, gears, pulleys etc..
  • All products are made of 304 Stainless steel.
  • 304stainless steel have good chemical resistance and may be mildly magnetic.
  • All contained in a compact and see through compartmented plastic Box.Easy to install and durable to use.
Check Stock

HVAZI 12 Kinds M1 M1.2 M1.4 M1.6 Small Screws Assortment Kit

  • 12 Kinds Metric M1 M1.2 M1.4 M1.6 Very Small Screws Assortment Kit.
  • 12 Kinds, each 50 pcs(+/-5 pcs), total 600 pcs.
  • Material: steel, Ni-Plated.phillips (plus) head,Flat Thin Head.
  • The Very Small Screws Assortment Kit Can be used for watches,clocks,Mobile phone etc.Packed in a plastic box,surround unscrew.A handy accessory to....
Check Stock

Hilitchi 150-Pcs [15-Size] Alloy Steel Internal Circlip Snap Retaining Clip Ring Assortment Kit - Size: 8mm to 36mm

  • 13 sizes Metric External Retaining Ring E-Clip Assortment Set total 450pieces.
  • Kit 13 various sizes contains: 1.5mm(50PCS), 2.0mm(50PCS), 2.5mm(50PCS) 3.0mm(50PCS),4mm(50PCS), 5mm(50PCS), 6mm(30PCS), 7mm(30PCS), 8mm(20PCS),9mm(20PCS),10mm(20PCS),12mm(20PCS),15mm(10PCS).
  • External circlip for retension of bearings, gears, pulleys etc..
  • All products are made of 304 Stainless steel.
  • 304stainless steel have good chemical resistance and may be mildly magnetic.
  • All contained in a compact and see through compartmented plastic Box.Easy to install and durable to use.
Check Stock

iexcell 250 Pcs Metric M3 x 6/8/10/12/16 Alloy Steel 10.9 Grade Hex Socket Flat Head Cap Screws Bolts Kit, Black Oxide Finish

  • 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Head Diameter: 5.94mm/0.23",Thread Size(Dia.): 3mm.
  • Total Length(Include Head): 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 16mm/0.47".
  • Screw Head Style: Flat Head (Known as Countersunk Head).
  • Screw Drive Style: Hex Socket ( Known as Internal Hex ), Hex Size 2 mm.
  • Package: Total 250 Pcs Hex Socket Flat Head Cap Screws, 50Pcs Per Size, Come in an Easy-use Separated Girds Plastic Storage BoxDescription Machine Screws, 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Easy to Store :These Screws Come in an Easy-use Separated Girds Storage Box.
  • ---Item------------Thread Length-------Total Length.
  • M3 x 6--------------4mm-------------------6mm.
  • M3 x 8--------------6mm-------------------8mm.
  • M3 x 10-------------8mm------------------10mm.
  • M3 x 12-------------10mm-----------------12mm.
  • M3 x 16-------------14mm-----------------16mm.
Check Stock

Metabones Canon EF to BMPCC4K T CINE Speed Booster Ultra 0.71x (MB_SPEF-m43-BTA)

  • ...7-40mm f/4L USMCanon EF200mm f/2.8L II USMCanon EF24-105mm f/4L IS USM (I)Canon EF24-70mm f/2.8L II USMCanon EF28-135mm f/3.5-5.6 IS USMCanon EF28-70mm f/3.5-4.5 IICanon EF28-80mm f/3.5-5.6 III USMCanon EF300mm f/2.8L IS II USMCanon EF.
  • Compatible Lenses (Cont.): Canon EF400mm f/5.6L USMCanon EF40mm f/2.8 STMCanon EF50mm f/1.2L USMCanon EF50mm f/1.4 USMCanon EF50mm f/1.8 IICanon EF50mm f/1.8 STMCanon EF70-200mm f/2.8L IS II USMCanon EF70-200mm f/4L IS II USMCanon EF70-200mm f/4L USMCanon EF70-300mm f/4-5.6L IS USMCanon EF8-15mm f/4L USM FisheyeEF85mm f/1.2L II USMSigma 135mm f/1.8 DG HSM Art 017Sigma 18-35mm f/1.8 DC HSM Art 013Sigma 24-105mm f/4 DG HSM Art 013SIgma 24.
  • Compatible Lenses (Cont..): Sigma 30mm f/1.4 DC HSM Art 013Sigma 35mm f/1.4 DG HSM Art 012Sigma 50-100mm f/1.8 DC HSM Art 016Sigma 50-500mm f/4.5-6.3 DG OS HSMSigma 50mm f/1.4 DG HSM (not Art)Tamron 10-24mm f/3.5-4.5 VC HLD B023Tamron 18-250mm f/3.5-6.3 A18Tamron 18-270mm f/3.5-6.3 B003Tamron 24-70mm f/2.8 VC USD A007 (G1)Tamron 28-300mm f/3.5-6.3 A06Tamron 35-150mm f/2.8-4 VC OSD A043Tamron 70-200mm F/2.8 Di VC USD A009.
Check Stock

Haoge Bayonet Lens Hood for Canon EF 50mm f/1.2L USM Lens Replaces Canon ES-78

  • Compatible with Canon EF 50mm f/1.2L USM.
  • NOTE: Only compatible with the lens list above. Please verify your lens model before order..
  • Note: it can't be used for Canon EF 50mm f/1.0L.
Check Stock