Reviews 500w Power Supply 2

Bewinner Desktop Motherboard,LGA2011-3 DDR4 Computer Desktop Mainboard for Intel x99 Chipset,8 SATA2.0 Port and 1 SSD M.2 Interface,Support 4 DDR4 213

  • 【LGA Desktop Motherboard】If you use for i7 series processors, please do not use REG ECC at the same time because they are not compatible with each other..
  • 【Needed 500W Power Supply】This platform requires a powerful power supply. Make sure your power supply is sufficient to support this platform.(At least 500w brand power supply).
  • 【Good Performance】This product is made of high quality PCB material, strong and durable, All products are tested before shipment..
  • 【More Memory 】Support 4 DDR4 2133/2400/2800 memory, support 32GB max.【Note】If it fails to boot or any questions about the product. There are a few points to pay attention to when installing, 1 memory 2RX4 server memory or general all-in-one memory, two kinds of memory cannot be used at the same time. The memory must be inserted into the color slot first. Remember to plug in the CPU power supply, plug in 4+4, not 2+6.
  • 【100% Satisfaction Guarantee】If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern..
Check Stock

BENFEI SATA to Molex, 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches

  • FLEXIBLE SATA POWER CABLE connects the latest Serial ATA hard drives or optical drives to a power supply with legacy Molex LP4 ports.
  • Male to Female Molex to SATA cable with straight connectors is the perfect 10 inch length for internal cable management.
  • COST-EFFECTIVE 3-PACK of hard drive power cables provides a spare or replacement SATA to Molex cable when upgrading your computer.
  • IDEAL SOLUTION for the DIY computer builder or IT tech repair when installing new or replacement SATA hard drives or DVD drives to a power supply that only has Molex power ports.
  • RECYCLE LEGACY EQUIPMENT to connect new SATA HDDs and optical drives to older power supplies with 4 pin Molex ports.
  • COMPATIBLE with 5V SATA devices connecting to 12V ATX power supplies.
  • Sample compatibility list includes Antec VP-450W Power Supply, ASUS 24x DVD-RS serial-ATA internal optical drive, ASUS DVD SATA Supermulti Burner, Coolmax 500W Power Supply, Cooler Master Elite 460W Power Supply, Crucial 256GB SATA 2.5" Internal SSD, EVGA 430W Power Supply, Intel 520 Series 120GB SATA 2.5" SSD, Kingston Digital 120GB ....
Check Stock

Cable Matters 3-Pack 4 Pin Molex to SATA Power Cable (SATA to Molex) - 6 Inches

  • Flexible SATA power cable connects the latest Serial ATA hard drives or optical drives to a power supply with legacy Molex LP4 ports.
  • Male to Female Molex to SATA cable with straight connectors is the perfect 6 inch length for internal cable management.
  • Cost-effective 3 pack of Molex to SATA power adapter cable provides a spare or replacement SATA to Molex cable when upgrading your computer.
  • Ideal solution for the DIY computer builder or IT tech repair when installing new or replacement SATA hard drives or DVD drives to a power supply that only has Molex power ports.
  • Recycle legacy equipment to connect new SATA HDDs and optical drives to older power supplies with 4 pin Molex ports.
  • Compatible with 5V SATA devices connecting to 12V ATX power supplies.
  • Sample compatibility list includes Antec VP-450W Power Supply, 24x DVD-RS serial-ATA internal optical drive, DVD SATA Supermulti Burner, Coolmax 500W Power Supply, Cooler Master Elite 460W Power Supply, Crucial 256GB SATA 2.5" Internal SSD, EVGA 430W Power Supply, Intel 520 Series 120GB SATA 2.5" SSD, Kingston Digital 120GB 2....
Check Stock

Creality 3D Printer CR-10S Pro V2 with BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm 11.8x11.8x15.7 inch with Capricorn PTFE 95% Pre-Assembled Printer

  • BL TOUCH AUTO LEVELING: Matrix automatic bed leveling, quality BLTouch automatic leveling device. CR 10S Pro V2 can automatically measure the height....
  • 500W MEANWELL POWER SUPPLY: The CR-10S Pro V2 3d printer comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • UPGRADED SILENT MAINBOARD:Creality 3D printer Cr 10s Pro v2 comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power....
  • HIGH-QUALITY EXTRUSION MECHANISM: Upgraded gear extrusion structure has double high-density gears and big extrusion force for smooth feeding. Z-axis....
  • CAPRICORN BOWDEN TUBING: Imported Capricorn PTFE tube with high temperature resistant makes the feeding smoother and ensure great printing texture in....
Check Stock

500W Pure Sine Wave Power Inverter DC 12V to AC 110V Car Inverter Power Adapter Converter with Type C PD18W/12V DC Output/4.8A Dual USB Charging Ports and 2 AC Outlets Car Charger

  • ...FF”, correct the fault condition,and then switch “On/Off” back to “ON”.The ON-OFF switch only works for the AC 3-prong plugs..
  • 【What You Get】: 1x 500W Power Inverter, Battery Clip, 1x12v Cigarette Lighter cable, 1x user manual, 24 hours customer service support for your 100% satisfaction.Our goal is to supply the professional power inverter for you !.
Check Stock

Heayzoki Computer Mainboard,X99 Desktop Computer Motherboard LGA2011V3 CPU 4Channel DDR4 Memory for Intel I7 E5,M.2 Highspeed Hard Drive

  • The rear 4 USB3.0 ports and Gigabit Ethernet dual indicator design make the motherboard run more stable and faster..
  • The motherboard uses a modular and large heat dissipation power supply design to maintain low temperature and high efficiency..
  • The wireless net card module interface can be directly installed with the same wireless ne card module of the laptop.Provide M.2 highspeed hard drive, support PCIE and SATA mode, small size and large broadband..
  • Equipped with digital status display and buzzer, the operating status of the motherboard is clear at a glance, and the sound reminder is clearer..
  • Features: 1: If you use i7 series processors, please do not use REG ECC at the same time, because they are not compatible with each other. 2: This platform requires a powerful power supply. Please make sure that your power supply is sufficient to support this platform. (At least 500w brand power supply) 3: All products are tested before shipment..
Check Stock

Apevia SFX-AP500W Mini ITX Solution/Micro ATX/SFX 500W Power Supply

  • High stability with 5% tolerance of 5V, 3.3V & 12V output.
Check Stock

Creality CR-10S Pro V2 3D Printer, Upgrade Creality CR-10 with BL Touch Auto Leveling Sensor Silent Board 500W Meanwell Power Supply Touch Screen Capricorn PTFE Large Build Size 11.8inx11.8inx15.7in

  • ✔️【BLTouch Auto Leveling】✔️ Matrix automatic bed leveling, quality BLTouch automatic leveling device. CR10S Pro V2 can automatically measure the height of 9 unique points on the heated bed to determine the ideal settings for perfect prints every time..
  • ✔️【Upgraded Silent Mainboard】✔️ This upgrade CR10 adopts V2.4.1 independently developed silent motherboard, which demonstrates firm properties as well as reduces noise..
  • ✔️【500W Meanwell Power Supply】✔️ Comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power supply. 100V-240V can be used, no need to adjust. It's convenient and fast, ensuring long-term stable printing..
  • ✔️【High-quality Extrusion Mechanism】✔️ Upgraded gear extrusion structure has double high-density gears and big extrusion force for smooth feeding. Z-axis double screw: good synchronization, moving more smoothly with more accurate printing..
  • ✔️【Capricorn Bowden Tubing】✔️ Imported Capricorn PTFE tube with high temperature resistant makes the feeding smoother and ensure great printing texture in this Creality 3d printer..
Check Stock

X99 LGA2011-3 DDR4 Computer Motherboard Mainboard, Intel LGA2011 V3 Gaming Motherboard with NVME M.2, Four Channels DDR4 ECC/REG RAM i7 Processor

  • Note: If you use for i7 series processors, please do not use REG ECC at the same time because they are not compatible with each other..
  • And: This platform requires a powerful power supply. Make sure your power supply is sufficient to support this platform.(At least 500w brand power supply).
  • Advisors: If you have any questions, please feel free to contact us through Amazon, we will provide you with detailed and easy to understand answers.
  • Test: All products are tested before shipment to ensure good performance..
  • DDR4/NVME M.2 SSD: Support 4 DDR4 2133/2400/2800 memory, support 32GB maximum. Support Full Speed M.2 Ssd Slot, Theoretical bandwidth up to 4GB/S ( For more parameters, please see the detailed description).
Check Stock

ROCKPALS Portable Power Station 500W (505Wh) and RP082 100W Solar Panel, 2 x Pure Sine Wave 110V AC Outlet, Solar Generator Kit for Outdoors Camping Travel Hunting RV

  • [Stable and Practical]: Rockpals electric generator provides the required 12V voltage regulation for applicable appliances, and no longer worry about power outages during use. Such as, when you’re using CPAP, 12V regulation ensures that you won’t disconnect while sleeping with CPAP unless the battery supply runs out. Not only that, it is also a good companion for camping, trip, fishing etc..
  • [Multi Outlets, More Options]: This power station can charge up to 9 devices at once, as it includes 2 pure sine wave 110V AC outlets (500W rated, 750W max), 1 car port (12V/10A, 120W max), 2 DC ports (12V/5A, 60W max), 2 USB 3.1A ports, 1 USB-A 3.0 Quick Charge port (18W max), and 1 USB-C PD output (20V/2.25A, 45W max). Quick Charge USB 3.0 and USB-C PD output allow for charging 2.5x faster than universal USB-C charger..
  • [Versatile Charging Methods]: There are 6 charging methods of Solar Generator: Solar panels, wall outlet and cigarette lighter car port. Using different methods at once results in 6 total combinations to recharge. Plug in your laptop cable via the USB-C port. Built-in professional MPPT technology leads to faster solar recharge rates for solar generator when connected to Rockpals solar panels..
  • [100% Worry-free Service]: The solar gen....
Check Stock