Reviews 5 16 Hex Bolts

8Pcs Screw Extractor Set, Easy Out Damaged Screw Extractor Kit, Bolt Water Pipe Remover Set, with Storage Case.

  • 8 piece Screw Extractor -can Easy Out Damaged Bolt Extractor Kit Stripped Broken Screw Remover Set, different sizes of screw extractor to meet different needs..
  • Screw Extractor Kit Made from carbon steel and are tempered twice for extra hardness and durability. Screw Extractor Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • Remove Damaged Screws Bolts And Water Pipes – These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes..
  • Screw Extractor can remove some of the common screwdriver can not be disassembled, damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings..
  • Screw extractor size includes #1 for 1/8″-5/32″ , #2 for 5/32″-3/16″, #3 for 3/16″-1/4″, #4 for 1/4″-5/16″, #5 for 5/16″-7/16″, #6 for 7/16″-9/16″, 7# for9/16″-3/4″, 8# for 3/4″-1″..
Check Stock

Trailer Slipper Spring Suspension and Tandem Axle Hanger Kit for 3 Tubes - 7000 Pound Axles

  • (4) 5 Leaf Slipper Spring for 7000 lb Axles.
  • (4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
  • (8) 3-1/2" long x 9/16" diameter shackle bolts.
  • (2) 4-11/16" long x 7/8" diameter equalizer bolts.
  • This supsension and hanger kit is for a 7k tandem axle setup (14K total capacity).
Check Stock

Glvaner (8 Sets) 5/16-18 x 2-1/2' Stainless Steel Carriage Bolts Screws Round Head Square Neck and Hex Nuts & Flat Washers 304 Stainless Steel 18-8 Full Thread Coverage

  • Package Includes: 8 Pcs Carriage Bolts (5/16-18 x 2-1/2") + 8 Pcs Hex Nuts (5/16"-18)+ 8 Pcs 5/16" ID Flat Washers.
  • Screw length (including the neck): 2-1/2 inch or 63mm.
  • Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners..
  • Carriage bolts have a dome shaped head and a square neck generally requiring a hex nut and flat washer. The square neck makes them self-locking when used within a square hole..
Check Stock

5/16-18 x 2\ (1/2\ to 6\ Available) Hex Head Cap Screw Bolts, External Hex Drive, Stainless Steel 18-8 (304), Full Thread, 15 PCS

  • High quality Grade 18-8 (304) Stainless Steel provides strength and offers good corrosion resistance in many environments..
  • Hex bolts have a variety of uses for construction, agriculture and automotive applications. They are strong, corrosion proof, and will support all of your project purposes..
  • Package Included: 15 PCS Hex Head Cap Bolts..
  • Hex Bolts are great to have around for use in wood and wet environments..
Check Stock

100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)

  • Product includs:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
  • The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
  • Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
  • Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
  • Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
  • Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
  • The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, a....
Check Stock

1/4-20, 5/16-18, 3/8-16 Threaded Inserts, Wood Inserts, Steel Threaded Inserts for Wood Furniture Screw, HELIFOUNER 143 Pieces 1/4'-20, 5/16'-18, 3/8'-16 Threaded Inserts Kit with Hex Wrench

  • 【Detailed Dimensions】1/4″-20 x 10mm/15mm/20mm/25mm, 5/16″-18 x 13mm/15mm/20mm/25mm, 3/8″-16 x 20mm/25mm, 10 sizes commonly used threaded inserts in a plastic case, different sizes can satisfy your different needs, coarse thread, fit standard 1/4 20 screws bolts and 5/16 18 screws bolts perfectly..
  • 【Color Zinc Plated Steel】Made of high quality carbon steel, color zinc plated on the surface which have good corrosion resistance in bad environment like high temperature, high hardness and perfect wear resistance, standard internal hex socket, without burr, smooth, non-slip, which can ensure long time using..
  • 【Easy To Install】You can drill a hole by using a 9.5mm /12mm /15mm drill bit, ensure a precise 90 degree angle for inserting the threaded inserts, then you need to screw the inserts into the 9.5mm /12mm /15mm holes by using our hex wrench. Make sure you countersink the hole to head size before you insert the threaded sleeve, fit standard 1/4 20, 5/16 18, 3/8 16 screws bolts perfectly..
  • 【Threaded Inserts Assortment Kit】Total 143 pieces 10 sizes threaded inserts are packed in a durable transparent box with label for you. It is easy to distinguish the size of the product, you can choose the suitable one to use in your wood furniture. O....
Check Stock

uxcell M8x16mm Hex Bolts 304 Stainless Steel Hexagon Screw Bolt 10pcs

  • Material: 304 stainless steel bolts are suitable for use in wet or dry environments, are not easy to rust and have good corrosion resistance..
  • Application: It is widely used in the assembly and maintenance of households, machine tools, construction, ships and DIY project. Such as the assembly and fixing of guardrails, home appliances, pipeline installations, equipment, steel-framed houses, etc..
  • Installation: A wrench is required for installation. Generally, with a hex nut and a washer to form a fastener device(Not in the package). It can also be used alone in components with a pre-threaded hole..
Check Stock

5,170 Piece Grade 8 Coarse Thread Nut Bolt & Washer Assortment Fasteners Only

  • Sizes Included: 1/4 , 5/16 , 3/8 , 7/16 , 1/2 , 5/8 , 3/4.
  • 5,170 pieces of Grade 8 Coarse Thread hex bolts, lock washers, flat washers, hex nuts and nylon lock nuts finished in a protective yellow zinc coating.
  • 25 years of experience in the fasteners industry and excellent customer service.
  • Please note this listing is for the fasteners only, no storage units are included.
  • Items ship in four boxes via FedEx Express.
Check Stock

Honoson 10 Pieces T-handle Hex Key Set T-key Allen Wrench Kit Sizes 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 Inches

  • Rich in size: there are various sizes in the T-key hex wrench kit, including 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 inches (including 2 mm, 2.5 mm, 3 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 8 mm, 10 mm).
  • Quality material: the hex wrenches are made of sturdy alloy steel, coated with black oxide finish, durable for lasting use.
  • The T-shaped handle is covered by plastic, non-slip for your efficient work.
  • T-key design: the T-handle hex wrenches are intended to provide you with a firm and comfortable grip, easy to stack well in a compact package, keep your tool box neat and tidy.
  • Function: the hex keys, namely Allen wrenches, are suitable to drive bolts and screws with hexagonal sockets.
  • Wide applications: these T-key hex keys are practical tools for bicycles, furniture, motorcycles, RC rars, machinery, vehicles, robotics and so on.
  • Please note that there are 10 pieces of T-handle hex key in this set, please select the corresponding T-handle hex key for the screw port you need to use.
Check Stock

8 Sets 5/16-18 Stainless Steel Hex Button Head Cap Screws Bolts Nuts And Flat Washers Snowblower Skid Shoe Mounting Bolts Accessories Kit for MTD 784-5580 710-0451 736-0242 712-04063 5/8 Inch

  • The package includes: you will get 8 sets of stainless steel hex button head cap screws bolts, nuts and flat washers, which is sufficient to meet your....
  • Reliable material: the snowblower skid shoe mounting bolts accessories kits are made of 304 stainless steel, which is sustained and....
  • Widely applicable: the stainless steel hex button head cap screws accessories are very suitable for installing the skid shoe plate and can replace....
  • Universal size: the size of the stainless steel snowblower skid shoe mounting bolts accessories is about (5/16-18) 5/8", which is suitable for most....
  • Easy to use: the snowblower skid shoe mounting bolts assortments are easy for you to use, they can be safely installed and released, you just need to....
Check Stock