Reviews 4l60e Bellhousing Bolt Socket

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....

GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive.
can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel..
PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct..
EASY INSTALLATION: Easy to install and remove, can be perfect to install to your 19mm Hex Pulley Damper Bolt with the 19 mm Harmonic Balancer Socket..
SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Balancer Socket Tool, simply return it for a full refund in 30 days, no....

2Pcs 4L60E Transmission Shift Solenoid, 1Set of Filter Gasket Kit.
Interchange Part Number: 10478112 / 10478120 / 10478131 / 24230298 / 24208465 / 24208576 / DEEP PAN.
Fits 4L60E / 4L60-E / 4L65E / 4L65-E / 4L70E 1998 and Up Automatic Models For Chevrolet/Pontiac/GMC.
Please used the Amazon PartsFinder on the upper left to check the compatibility to make sure it fits your vehicle.
Within a year, we can replace the new one for you if the item fails for any reasons.

Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.

Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Michigan Motorsports Valve Seals.
The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and Michigan Motorsports Valve Seals.
These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available..
The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage..
This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111.

SOCKETS PROVIDE STRONG GRIP ON LUG NUTS: The ABN Twist Sockets Set Stripped Bolt Extractor Set allows you to bite into and remove worn locking nuts to....
USE WITH YOUR TOOLS: 1/2-inch square drive fits your wrench drives.
For use with ratchet, breaker bar, or hand wrench (not included).
PERFECT SIZE FOR YOUR NEEDS: These lightweight twist socket nut extractors includes 17MM, 19MM, 21MM, and 22MM bolt and nut remover sockets.
EASY TO USE: Choose an appropriate twist ratchet socket from the deep twist socket set then hit it with a hammer onto the damaged nut.
BUILT TO LAST: HRC 50-53 hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.

【GOOD REPLACEMENT FOR】The universal socket is a perfect replacement for 30pcs 3/8in to 3/4in and 10mm to 19 mm sockets..
【EASY TO OPERATE】The socket is easy to hold and remove damaged, worn and rusted nuts and bolts..
【TIGHT THE NUT & BOLT】Hold the nut and bolt tightly for easy one-handed operation..
【KEEP A UNIFORM FORCE】Maintain a uniform force on all sides of the fastener to prevent rounding..
【SUITABLE FOR】Suitable for any standard 3/8in drive wrench. And the processed load is much higher than other adjustable tools..

[ Extract Even Damaged Bolts & Nuts ] Remove even the most stubborn nuts, bolts, lugs, studs, hex screws, and more. The left-hand spiral of each piece of this nut anad bolt extractor set is desgined for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
[ Different Metric & SAE Sizes ] Work on different jobs with this extractor socket set. It offers the following sizes: 9mm 10mm 11mm (7/16) 12mm 13mm 14mm 15mm 16mm(5/8) 17mm 19mm (3/4) Can be used on SAE and Metric sizes.The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws..
[ Will Last For Years ] Our bolt & nut extractor kit is made from black Chrome Molybdenum that provides greater strength and durability and prevents corrosion. You will be able to work with this tool for years!.
[ 3/8 Drive Socket Set ] You can use our stripped lug nut remover with 3/8 square drive for use with socket wrench or impact wrench gun..
[ Stay Organized ] This lug nut & bolt extractor tool comes supplied in a durable case so that you can keep the set organized and easily transport it between different jobs..

Note: This part is a refurbished part,If you have to replace the solenoids or valve body, or reprogram the system, always perform the adaptive relearn. If you don’t, you could run into harsh or erratic shifting..
Fitment:Compatible with Fits all GM Products with the 4L60E Model Automatic Transmission 2003-On.
Package List:This kit includes everything pictured: One (1) A Shift Solenoid One (1) B Shift Solenoid One (1) 3-2 Downshift Solenoid One (1) EPC (Pressure Control) Solenoid One (1) TCC/PWM Solenoid.

APPLICATION: Fits for Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications（Use with 1/2" drive ）.
SUPERIOR QUALITY: Made from heat-treated, impact quality GB 40CR Alloy steel, solid, durable and rust-resistant.
POWERFUL TOOL: The strength of Sunluway 19 mm socket tool has been increased to more than three times as compared with the standard socket mass,....
EASY INSTALLATION: Easy to install and remove, perfectly match a 19mm Hex Pulley Damper Bolt.
SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Harmonic Balancer Socket Tool, simply return it for a full refund in 30 days.....