Reviews 4inch Sharp Led

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Carbide Spiral Router Bits Up&Down Compression Bit 1/4 X 1 inch Cutting Size with 1/4 inch Shank for Woodwork CNC Router Bit Engraving Carving Mortise Groove Tools

  • UP & DOWN solid carbide compression spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for overall length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
  • The route bit suit for CNC router any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

KaTur 3/4Inch Round LED Front Rear Side Marker Indicators Light Waterproof Bullet Clearance Marker Light 12V for Car Truck (White)

  • 3/4inch Miniature Round Truck Clearance Marker Light, Used for clearance Lamps, side marker or identification light,Trailer Light etc..
  • Cable length: 22cm(about 8.66 inches), DC12V, 3 LED lens inside of the lamp offer extreme bright light. Low consumption, high energy, long life..
  • Easily mounts into standard 3/4inch hole..
  • Waterproof Lens, sealed Light, universal fit for most car and truck. DOT/SAE Approved!.
  • Location: front / rear / left / right on trucks, heavy trucks, buses etc..
Check Stock

BALL GRIP Rechargeable Screwdriver Cordless (High Speed) No.220USB-S1U 220USBS1U Made in Japan by VESSEL

  • Seamless Work by 2 ways usage of Power and Manual Driven Screwdriver (High Speed Type).
  • Interchangeable with 1/4inch Hex Power Bits or Double Ended Bits (Japanese 1/4inch Hex standard is not applicable).
  • Power Driven up to 3.5 lbf-in (0.4N.m) torque, and Withstanding up to 88.5 lbf-in (10N.m) torque by Manual Driven.
  • 3.6V(800mAh) Rechargeable Battery Integrated (Charging from the micro USB port).
  • No Load RPM: 1,200min-1 / Built-in Bright LED Light for work efficiency in a dark place.
Check Stock

Amber LED Pods, CAMIY 2Pcs 120W 4 Inch Yellow Fog Lights Triple Row LED Driving Light Spot Flood Combo Beam LED Fog Lights for Truck ATV USV SUV Pickup Boat Front Bumper

  • BRIGHTNESS -- The 4inch yellow fog lights look unique and great. Build-in 40pcs high intensity 3W LED chips bright enough. 6,000K yellow light, light up the road with 120W and 12,000LM output power. Break the darkness and improve visibility..
  • BEAM PATTERN -- The yellow led pods combine 30° spot beam with 170° flood beam. The spotlight can more concentrated illuminate the dark road ahead for you, while the floodlight also takes care of the surrounding dark places. Soft yellow light doesn't cause dizziness..
  • DURABILITY -- IP68 Waterproof, Shockproof, Dustproof. The offroad driving light is made of high-quality aluminum alloy, and the heat sink maximizes the surface area for efficient cooling, extending the life of up to 50,000 hours..
  • APPLICATION -- Quick install out of the box. The 4 inch amber light pods can be installed anywhere you want. Fit for all 9-30V vehicles. Great for all kinds of Truck, ATV, SUV, Boat, Pickup, Boat, Car, etc..
  • ALL IN ONE -- All in one packaging: 2pcs 4inch Amber LED Light Bars + 2 Adjustable Mounting Brackets + Necessary Accessories. If you have any questions, just feel free to contact us..
Check Stock

4 inch Scraper Blades 60 pcs Replacement High Carbon Steel Razor Blade for Scraper to Remove Paint Wallpaper Sticker Adhesive Labels 6 boxes

  • Sharp Scraper Blade: The sharp blade can easily cut into stubborn stains. It is very suitable for cleaning paint, decals, glue, caulk, wallpaper,....
  • Reliable Razor Blade: It is made of high-carbon stainless steel, has sufficient strength and rigidity, and does not rust.
  • Keep Your Scraper with the Best Cleaning Effect: 60pcs replacement blades, suitable for most 4inch wide blade razor scrapers, please read the size....
  • Multi-purpose Scraper Blade: Very suitable for cleaning paint, decals, glue, caulk, wallpaper, labels, chewing gum, food residues and other stains on....
  • Portable Packaging: 6 boxes of 10 blades per box, independent packaging for easy storage and carrying.
Check Stock

Sworker Carbide Burr Set 1/4 Shank 8PC Die Grinder Bits Rotary Rasp File for Metal Wood Weld Concrete Stone Grinding Porting Deburring Engraving Polishing Double Cut

  • 1/4inch (6.35mm) Shank compatible with Ingersoll Rand, Milwaukee, DEWALT, Makita, AEROPRO, Chicago Pneumatic, NEIKO, AIRCAT, WORKPRO, Astro Pneumatic and so on rotary tools..
  • High Percision: USA and Germany-made 6 axis CNC for burr fluting. Shape Variety: Cylindrical,Ball Nosed Cylindrical,Ball,Ball Nosed Tree..
  • Great for cleaning up holes, sharp edges, welds, slots and hard to reach areas. Comfortable: Working with reduced vibrations and less noise..
  • Incredibly durable,sharp and well-balanced and cuts through metal,wood,stone and plastic like butter..
Check Stock

7 LED Headlights Hi/Lo Beam DRL Lamps + 4inch LED Fog Light Combo for Kenworth T2000 1998-2010 Pack of 4

  • 7inch LED Light: All-in-one design, high beam / low beam / DRL daytime running lights all in one light. 50W Per Piece Low Beam w/ Projector, 75W Per....
  • 7inch LED Light: Plug and Play - No splicing, no wiring, just ready to use. Equipped with anti-flicker Unit w/ Harness H4 / H13 Adapter. Finish....
  • 4inch LED Light: 60W/Set, 6000LM/Set, Dimensions: 4.0 inch, Lens: 6pcs*5W LEDS, Colour: 6000K, Light: Fog Light & DRL: White.
  • Energy Saver 60% Lower Consumption, Long Lifespan. Optimized heatsink design.
  • Waterproof, Dustproof, Anti-explosion. Solid aluminum body can highly....
  • Packing include: ▲2 x 7 inch LED headlights ▲2 x 4 inch LED headlight ▲2 x H4 to H13 Adapters ▲2 x LED Decoder .US Stock, Fast free shipping.....
Check Stock

Mars-Rock Carbide Burr 1/4 Shank,Head Dia.1/2 ,1 Piece,Die Grinder Bits Rotary File Rasp for Metal Wood Weld Concrete Stone Grinding Deburring Porting Engraving Trimming Polishing Double Cut

  • 1/4inch (6.35mm) Shank compatible with Ingersoll Rand, Milwaukee, DEWALT, Makita, WORKPRO, Astro Pneumatic, AEROPRO, Chicago Pneumatic, NEIKO, AIRCAT rotary tools..
  • Incredibly durable,sharp and well-balanced and cuts through metal,wood,stone and plastic like hot knife cuts butter..
  • High Percision: USA and Germany-made 5 axis CNC for burr fluting..
  • Great for cleaning up holes, sharp edges, welds, slots and hard to reach areas. Comfortable: Working with reduced vibrations and less noise..
Check Stock