Reviews 4g Cwdm Transceiver

Add On Xfp Module

  • For data Networking, Optical Network 1 10gbase-cwdm network.
Check Stock

Juried Engineering CD4046BE CD4046B CD4046 CMOS Micropower Phase-Locked Loop Breadboard-Friendly IC DIP-16 (1 Piece)

  • The HMC830LP6GE is a low-noise, wideband, fractional-N phase-locked loop (PLL)..
  • The HMC830LP6GE features industry-leading phase noise and spurious performance at all frequencies to minimize blocking and improve receiver sensitivity and transmitter spectral purity..
  • The device's outstanding performance makes it a multi-channel, rural standard wideband transceiver. Ideal for devices..
  • Chip features RF Bandwidth: 25-3,000 MHz Phase detector maximum speed: 100 MHz Ultra-low phase noise: -110 dBc/Hz (in-band typical) Quality Factor (FOM): -230 dBc/Hz (integer) 40-pin 6 x 6 mm SMT Package: 36mm.
  • Chip application honeycomb 4G infrastructure/repeaters and femtocells Communication Test Equipment Cable TV equipment phased array application Very high data rate radio Tunable Voltage Reference with Spurious-Free Performance.
Check Stock

AnyTone AT-5888UV 50W Dual Band Ham Mobile Radio VHF 144-148MHZ / UHF 420-450MHz Car Transceiver

  • 1.The transceiver is a ruggedly-built,high quality Dual-band transceiver providing 50Watts of power output. Quad band transceiver for the widely....
  • 2.Dual-band mobile radio has four independent receiving bands, consist of UU,UV,VU,VV for dual receive and dual output, plus receiving for signal of....
  • 3. Cross Band Repeater: 758 memory channels, full duple operation with independent volume and squelch controls, compander and built-in CTCSS/DCS,....
  • 4.CHIRP SUPPORT. Free software also can download at Anytone office website..
  • 5.Package contents: 1 x Anytone 5888UV Transceiver, 1 x Microphone, 1 x Mobile Mounting Bracket, 1 x DC Power Cable with Fuse Holder, 1 x Screws for....
Check Stock

Logitech USB Unifying Receiver - 2 Pack

  • Applications: This device can be wildly used to wireless remote control,wireless audio,somatosensory devices, RFID, NFC, smart grid, smart home, etc..
  • NRF24L01 Wireless Transceiver Module with 125 Communications channels, multi-point communication and frequency hopping to meet the communication....
  • NRF24L01 wireless transceiver module built-in 2.4GHz antenna, small size, 15x29mm (including antenna).
  • it can be directly connected to a variety of....
  • The operating voltage of the wireless module is generally 3.3v, while the ordinary 51 microcontroller is 5v. This module is convenient to shop....
  • NRF24L01 Socket Breakout Adapter with NRF24L01 Wireless Transceiver Module.
Check Stock

Repeater Duplexer MX72 VHF+UHF Duplexer 144-148MHz/ 400-470MHz Different Frequency Indoor Antenna Combiner

  • 【MX72 Antenna Duplexer,】The MX72N duplexer is a series of inductance coils and capacitors that acts as a band-pass filter.Used in different frequency, can not transmit at the same time.The MX72N duplexer can be used in two different ways..
  • 【HF-VHF/UHF Transceiver Duplexer】Combines the output of the HF/VHF transceiver and the output of the UHF transceiver so that both transceivers can be connected to the same antenna..
  • 【Function】:Can also be used to separate UHF/VHF transmissions from UHF transmissions so that one transceiver can be connected to two antennas..
  • 【Note】:The MX72 VHF+UHF Duplexer is designed for indoor use.If you use the MX72 VHF+UHF Duplexer outdoors, it should only be used for short periods of time under good weather conditions. Do not use the MX72 VHF+UHF Duplexer outdoors when there is any kind of precipitation..
  • 【Quality Assurance】: As a professional seller, we offer high quality products and thoughtful services. Each product must be strictly inspected to ensure reliable quality. Please rest assured to buy our products, I hope you have a pleasant shopping experience..
Check Stock

8 Band Radio Transceiver LCD SDR Full Mode HF SSB QRP Transceiver Shortwave QRP SSB CW with BNC Antenna Connector Support USB LSB CW AM FM (no Power)

  • RADIO TRANSCEIVER-- Shortwave QRP SSB CW radio transceiver, with clear LCD display, support connection to computer, use FT8, JS8, FT4 and other mode software to control digital..
  • REASONABLE DESIGN-- Headphone and power button and microphone jack are on the front panel for easy connection of headphone and power button, with larger touch area and more comfortable key experience..
  • WITH SPEAKER-- Upgraded built in speaker effect, stable sound and less interference, fast change of QRP CW frequency, and support CW side volume adjustment..
  • HIGH EFFICIENCY-- The transceiver has an 8 band design, covering 80m, 60m, 40m, 30m, 20m, 17m, 15m and 10m frequency, which has high transmission efficiency..
  • OTHER FUNCTIONS-- This radio transceiver has multiple interfaces, with built in speaker with cavity and BNC antenna interface, and all LPF parts use 100v c0g/np0 capacitors..
Check Stock

1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)

  • [How to Use] Singlemode and Multimode converted by transceivers, Dual Fiber and Single Fiber converted by transceivers, SFP to CWDM SFP converter..
  • [Multirate] Support for SFP transceivers with data rates from 100Mbps to 2.5Gbps through two SFP slots. (Important: Use matching speed modules in SFP1 and SFP2 only.).
  • [Protocol Transparent] Compliant with all protocols, as long as the data rate is correct..
  • [Easy Installation and Use] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER can dynamic feedback link connection state and fault detection to easily monitor network status..
  • [Warranty] 3-year warranty and lifetime technical support..
Check Stock

USB Programming Cable for LEIXEN LX VV-808S/ VV-898 Car Mobile Radio

  • Portable Two Way Radio Mobile Transceiver. The newest transceiver differs from traditional one, built-in 12000mAh Battery, so it can work continuously....
  • A DC 13.8V hole and a power charging hole on the side of the radio. Plug the power cord into the charging port when charging. If you want to use the....
  • The mobile transceiver built-in a mini fan and a temperature sensing system, so when the machine is continuously used in high power transmission, and....
  • Dual PTT function: Dual Push-To-Talk (PTT) speaker mic. Communicate easily with the two easily accessible buttons. There is a speaker switch on the....
  • Measure: 6*8.1*1.8 inches. Package including (main): 1*mobile radio, 1*Instruction, 1*mobile antenna, 1*dual PPT mic, 1*so239 to pl259 adapter,....
Check Stock

Anytone 5888UV III Tri-Band FM Transceiver Tri-Band Mobile Radio with Free Cable

  • 1.▲▲☞FONGHOO☜▲▲ Official Distributor of Anytone. The transceiver is a ruggedly-built,high quality Tri-band transceiver providing 50Watts....
  • 2.Tri-band mobile radio has four independent receiving bands, consist of UU,UV,VU,VV for dual receive and dual output, plus receiving for signal of....
  • 3.750 memory channels, full duple operation with independent volume and squelch controls, compander and built-in CTCSS/DCS, DTMF, 5TONE, 2TONE....
  • 4.Ideal for Fire, Police, FEMA, CAP, security patrols, business communications, schools, construction crews, universities, and other organizations....
  • 5.Package contents:1 x Anytone 5888UV III Transceiver, 1 x Microphone, 1 x Mobile Mounting Bracket, 1 x DC Power Cable with Fuse Holder, 1 x Screws....
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock