Reviews 450mm Blade Wire

RichYa Wire Stripping Machine Manual Scrap Wire Stripper for 0.06"-0.98" (1.5-25mm) Diameter Copper, Compact Stainless Steel Wire Stripper with Handle, Manual and Drill Powered

  • Wide Application: Our Manual and Drill Power Wire Stripper Tool can strip wire chips of different sizes, from 0.06" (1.5mm) to 0.98" (25mm) diameter. Suitable for use with common sizes of copper wire..
  • Wire Stripping Operation: Push the wire into the roller from the feeding hole, let the wire under the blade, and adjust the height of the blade. you need to adjust the feeding panel to fix the wire and prevent the wire from shifting during stripping..
  • Replaceable Blades: Our manual wire stripper has a sharp 65Mn steel blade, long serve life and can easily remove plastic and rubber insulation from waste wires. Besides, we also come with 1pcs replacement blade..
  • Durable Hand Crank: Hand crank design, made of aluminum alloy, durable and easy to operate. You can either use the handle for manual wire stripping or attach a drill for automatic wire stripping..
  • Portable Wire Stripper: The size of this wire stripper is only 15x7.5x17cm / 5.9x3x6.7 inches, it is easy to store and does not take up space. It can be used for waste copper wire recycling at any time..
Check Stock

Slendor Manual Wire Stripping Machine, Drill Powered Wire Stripper Machine for 0.06-0.98 Inches Scrap Copper Wire Cable Stripping, Portable Copper Wire Peeler Machine with Hand Crank

  • ... during operation. The hand crank is ergonomically constructed for ease of use. The wire stripper machine easily connect to your drill for auto cranking, save time and energy.
  • it is good at use after your arms get tired from tedious manual operations. Both operation methods easily to provide power for durable steel blades and removes plastic and rubber insulation from old wires..
  • ✅ High Compatibility: The cable stripping machine is equipped with adjustable blades, feeding plates, which can adjust the height between the wire and the blade. Adjusting the position of the feed hold plate nut can adjust the position of the feeding hole. The stripper has 4 different diameter wire feed holes, suitable for wire diameters from 1.5mm to 25mm, to meet your different stripping needs and adapt to various common sizes of cables..
  • ✅ Safe Use: The copper wire stripper frame is made of sturdy aluminum alloy that can withstand high-strength industrial-grade continuous stripping for long-term reliable use and maintain its high-quality functionality. The good construction keeps the blade fully protected, and packing a pair of gloves for complete safety during work. It is equipped with an additional blade, which can be replaced when the blade becomes dull after lo....
Check Stock

Partsam 5X Amber Cab Marker Roof Lights 264143AM+ 5X Amber T10 LED Lights Assembly Compatible with Ford E150 E250 E350 E450 F150 F250 F350 F450 F550 Super Duty with Stock Cab Light 1999-2016

  • This Amber LED Cab Roof Running Marker Light Set Complete Kit Compatible with 1999-2017 E150 E250 E350 E450 E550 F150 F250 F350 F450 F550 Super duty pickup truck with stock cab marker lights. Also fits for 2017 2018 E350 E450 Super Duty Trucks. (Do NOT fit 2017 2018 F250 - F550).
  • Application: Cab Marker, Cab Marker Clearance Light, Roof Running Light, Roof clearance lights. Interchange Part Number: 8C34-15442-CB 8C34-15442-AD.
  • Lens Material: ABS Plastic (not fade from exposure).
  • Wire Connection: Red wire to positive and Black wire to Negative(Not Plug&Play)(Ground).Screw Size:5mm*16mm.
  • Pack Includes: 5x Amber Roof Cab Marker Lights with 5 bases (Assembly Kits) + 5x Amber T10 194 168 LED Bulbs.
Check Stock

BEAMNOVA Upgraded Replacement Blade for Copper Wire Stripping Machine Powered Cable Stripper Cutters, 15mm ID. x 64mm OD, 0.58in ID. x 2.51in OD.

  • UPGRADED VERSION: Comes with the built-in Bearing - No need to change the bearing when replacing the blade!.
  • 14.82mm(0.58") inner diameter, 63.49mm(2.51") outer diameter, 15mm thickness..
  • BEAMNOVA Blade replacement for wire stripping machine. Made of High strength special alloy. Great grinding workmanship, easy to cut the protective cover of wire..
  • Last much longer service time than high-speed steel. Check the video at the picture column to see how to replace the blade..
  • NOTE: Please compare the original blade size with the BEAMNOVA blade before purchasing. If the original blade size is smaller than BEAMNOVA'S, this blade may not be suitable for your machine..
Check Stock

Drill Powered Scrap Wire Stripper Machine, Portable Cable Stripper Machine, Stripping Wire #18 Gauge to 250MCM, Adjustable Without Tools (Cross Handle)

  • ... Wide Application: 2 different feeding Panels. 8 different sized feed holes. Suitable for all sizes from #18 wire To 250 MCM, diameters from 0.08"(2mm) Up To 0.79"(20.1mm)..
  • Aluminum Alloy Construction: Drill Powered Wire Stripper Machine is made of Alloy Steel Blade and durable drive wheels.It remains sturdy for prolonged use..
  • Easy to Use: Quickly and easily set up the wire stripper machine to your exact needs with the Regulating Nut and 2 Thumb Screws. This is so that the pressure of the blade on the wire is just right and the blade stays in the middle of the wire during the stripping process..
  • Portable Wire Stripper Machine: This is a cable stripper that is light enough that you can easily take it anywhere to work. At the same time, the mounting holes on the base also allow you to use the included screws to fix this wire stripper on a flat surface such as a workbench, which will give the wire stripper machine better stability..
Check Stock

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

Wazakura Made in Japan 5 PCS Bonsai Cutter Tools Set with Roll Bag Concave Branch Cutter Knob Cutter Jin Plier Wire Cutter Root Cutter Bonsai Tool Kit - 5PCS Bonsai Cutter Set with Case

  • 【Made in Japan】Real Japanese cutters made by local artisans in the city of Sanjo, in Niigata Prefecture. Sanjo is known since 17th century for the metalwork skills of their artisans and blacksmiths..
  • 【Specification】 [ Concave Cutter ] Size: L 7.87 x W 1.96 x H 0.78 inch (200 x 50 x 20 mm) Length of Blades: 0.98 inch (25 mm) Weight: 6.7 oz (190 g) Suitable Cutting Capacity: 5/16" to 1/2" (8mm to 13mm) [ Knob Cutter ] Size: L 8.26 x W 1.96 x H 0.51 inch (210 x 50 x 13 mm) Length of Blades: 0.59 inch (15 mm) Weight: 8.11 oz (230 g) [ Jin Pliers ] Size: L 8.26 x W 1.96 x H 0.59 in (210 x 50 x 15 mm) Weight: 8.11 oz (230 g).
  • [ Bonsai Wire Cutter ] Size: L 7.7 x W 1.9 x H 0.6 inch (195 x 50 x 15 mm) Length of Blades: 0.5 inch (12 mm) Weight: 7.8 oz (220 g) ・Root Cutter Size: L 6.7 x W 1.8 x H 0.8 inch (170 x 45 x 20 mm) Length of Blades: 0.75 inch (19 mm) Weight: 5.5 oz (155 g) Suitable Cutting Capacity: 1/4"(6mm) to 7/16"(10mm) [ Bonsai Tool Roll Pouch ] Size: L9.84 x W17.72 x H0.12 inch (L250 x W450 x H 3mm) Weight: 5.75oz (163g) Material: PU Leather.
  • CONCAVE CUTTER: One of the essential bonsai tools.
  • Ideal for pruning/removing bonsai branches in a way that the wound heals quickly and with little scarring.
Check Stock

Gemfan Durable 40mm 2-Blade Props with 1mm Shaft Micro Whoop Drone Props for 1102 Motor Longrange Quadcopter 16pcs 8CW 8CCW

  • 【Performance】20g ultralight 1S Quad perfect for freestyle and crusing.It fly very quiet. Pilots can enjoy up to 8 minutes and 45 seconds flight time with 1s 450mah battery!.
  • 【ADVANCED MATERIAL】 Ultra-durable blade, this 1.6 inch props made of high quality PC material with the best efficiency and durability..
  • 【SPECS】 1610-2 blade props with 1.6 inch diameter, 1 inch pitch, 40mm paddle diameter, 5mm pad thickness, 1mm center hole inner diameter, 8mm maximum blade width, weight of 0.241g..
  • 【RECOMMANDED】 Suitable for 1102 brushless motor.
  • 【INCLUDES】 8 pairs/16 pcs 1610 propellers - 8CW 8CCW | COLOR: Clear Gray.
Check Stock

MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse 5 Pack

  • Heavy duty 12AWG wire, better protection to the circuit..
  • Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse..
  • The rubber cap fits on tightly to protect any standard blade fuse inside..
  • Package included 5 x fuse holder & 5 x 30A blade fuse..
Check Stock

Klein Tools 63020 Multi-Cable Cutter Klein-Kurve

  • CRIMPING RANGE:Cable cutter crimping range 400mm²Max.For cutting copper wire or aluminum wire..
  • DO NOT CUT STEEL:The cable wire cutter is not suitable for steel,steel wire or steel core aluminum stranded wire..
  • FAST AND SHARPNESS:Sharp blade structure,Cutting easily with forging blade.Cuts flat and saves times..
  • HIGH HARDNESS:Forged with alloy material,not easy to rust,to be dull,not easy to corrode,durable..
  • ERGONOMIC DESIGN:Ergonomic engineering plastic handle,comfortable to hold,non-slip and durable..
Check Stock