Reviews 4 to 1 Multiplexer - BestBuyersPro.com

Analog Devices ADG509ATQ Analog Multiplexer

【16-channel Analog Multiplexer】- This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
【Used for】- It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
【Process Digital Signals】- Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
【Bidirectional Internal Switch】- The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on..
【Note】- Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected). Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..

The 4Ch Video Color Quad Multiplexer allows several video signals from CCTV security cameras or other analog video devices to be combined and displayed on one monitor. The video processors are also commonly referred to as video mux, CCTV multiplexer, or color quad processor..
Full screen displays at real-time refresh rate for each channel. Multiple and automatic display by turn mode: 4Ch, 2Ch, Single Channel.
Camera title, time and date display for easy identification, 4 Channel BNC input and 2 Video BNC outputs.
Switch between NTSC and PAL system. Picture in Picture show, PIP position switched (top left, top right, bottom left, bottom right corner). High-Resolution Picture show, Adjust individual resolution. High-quality Screen Freeze function..
Free 1Amp Power Adapter and remote control Included.

The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.

This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
Use the CD74HC4067 16-channel analog signal switch.
Analog signal input: C0-C15 16 channels..
IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
Wide operating temperature range: -55C to 125C.

Upgraded from the original basis, MultiPort has multiple connection ports.
You can use it as a hub to add I2C devices to the bus as you need, including mounting holes, so the board can be fixed to any system.
There are 4pcs 1.00mm 4-pin female connectors and Mounting Points.
All boards that support 1mm pitch 4-pin JST connector, which can reduce the required PCB space..
To make using this multiplexer easier, all communication is done via I2C using our convenient Qwiic system..

8 Channel CCTV Video Multiplexer Color Quad Processor compatible with all Analog Security Cameras. NOT Compatible with 720P/1080P AHD / TVI / CVI / HD-SDI CCTV Cameras..
Multiple display modes: 8 camera view, 4 camera view, 2 camera view, single camera view, PIP (picture in picture).
NTSC and PAL Video Format Supported. Resolution PAL: 720 x 576.
8 Channel BNC Video Inputs, 1 BNC VCR In, 1 BNC VCR Out, 1 BNC Monitor. Image Freeze Function, Selectable Image Zoom Area, Video Loss Detection, Motion Detection, Auto sequence.
Power Supply adapter, remote control and user manual included..

It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..
Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..

The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent talk, please turn off the switch first and then on..
It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel..
Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected)..
Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices..
This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer..

The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
The chip is compatible with 3V and 5V and can be used with any logic level.