Reviews 4 pin Pwm Fan Controller

Gavemi Fan Splitter PWM Adapter Cable All are 4 Pin Compatible with 3 Pin Fan 1 to 4 Converter for PC Computer Case Fan, 12.5 inches 2 Pack

  • Fan splitter cable for running four 4 pin fans on the pwm fan header on a motherboard.
  • PC fan splitter all are 4 pins, Compatible with 4 pin pwm fan connector and 3 pin fan connector.
  • PWM fan splitter has a 4 pin male connector connected to the motherboard, Are four ''4 Pin'' female pins on the other end to connect to the pwm case fan.
  • Notice：This 4 pin fan splitter cable is not missing a pin and all are 4 pins.
  • Length 12.5 inches , Pack of two computer case fan splitter cables.
Check Stock

Pccooler 120mm Fan Moonlight Series 5 in 1 Kit Upgrade,PC-5M120 ARGB LED Computer Case Fan - PWM Cooling Fan - Dual Light Loop Quiet Fan/Multiple Light Modes with Wireless Controller for PC Case

  • ...ct the fan 4Pin PWM connector with 1-to-5 strip cable’s female port, do not connect it with motherboard. There’s switch fan speed control by motherboard’s PWM signal. These fans are 4pin 5v ARGB connector that connect with RGB control box one by one..
  • 【Dual Light Loop Design – Controlled by RGB Remote Controller】Addressable RGB LEDs can be controlled by RGB remote controller – 12 lighting modes, 8 different colors and multiple RGB light speeds, provide colorful streamer lighting effects. Double-sided ring ARGB glare effect design, creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote..
  • 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case..
  • 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs. Wireless RGB controller, more advanced wireless....
Check Stock

Endlesss PWM Fan Splitter Cable 4 Pin Black Sleeved Case Fan Splitter Cable 1 to 3 Converter Braided Y Splitter Computer PC Fan Extension Power Cable 10.5 Inches (2 Pack)

  • HIGH QUALITY: The fan PWM splitter Y-cable for PC motherboard cooling fans are constructed using high-quality material, measures 10.5 inches in length and cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust and breakage..
  • 2-WAY MOTHERBOARD: The PWM fan cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin & one 4-pin connector.
  • the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • MANY FUNCTIONS: The PWM case fan splitter provides better power supply for motherboard fans, supports PWM function, increases airflow, reduces the accumulation of heat within the frame and satisfies all your control needs to increase the lifespan of the motherboard..
  • For 3-PIN & 4-PIN FAN: The 2-way PC PWM fan splitter power cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans.
  • this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
  • CPU FAN EXTENSION: The pc fan extension cable 3-pin & 4-pin compatible is designed for enthusiasts with need for controlling numerous system fans..
Check Stock

FBHDZVV 4 Pin PWM Fan Splitter Cable, Black Sleeved Case Fan Braided Adapter Cable 1 to 3 Converter Y Splitter for Computer PC CPU Cooling Fan ATX Case 4-Pin/3-Pin Extension Power Cable 10 Inches

  • The pwm fan splitter cable is designed with a 4-pin female connector on the one end and on the other end it splits into two 3-pin male & one 4-pin male connector, 1-to-3 splitter fan power supply extension cables, male to female connector plug..
  • The black sleeved case fan braided adapter cable is mostly compatible with many brands of 3-pin and 4-pin PC case motherboard cooling fans, this PWM fan splitter hub connects 3 computer case fans to a single motherboard fan header..
  • Easily realize 4 pin PWM temperature control fan parallel connection, make full use of the limited number of motherboard 4 pin interface, can be extended to connect three 4 pin /3 pin fans, the fan splitter cable provide additional fan to increase airflow in your computer case..
  • 4-pin PWM 1 to 3 splitter fan power supply extension cable for PC computer motherboard fans, make you easier diy PC computer case. support 4-pin and 3-pin fans cable, the fan power cable compatible with 4 pin and 3 pin PC case fans..
  • Easy to plug, the fan extension cable offers greater flexibility between Motherboard and CPU cooling fans, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Noctua NA-FC1 4-Pin PWM Fan Controller Black

  • Compact, highly flexible controller for 4-pin PWM fans.
  • Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans....
  • “No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors.
  • Includes a 3-way splitter cable for controlling up to 3 fans simultaneously.
Check Stock

PWM Fan Splitter Extension Cable - 1 to 5 Computer Fan Splitter Cable Compatible with 3 & 4 Pin PC Cooling Fans, 13 inch Black Braided Nylon Cable

  • Manages Multiple Fans - Our PWM fan cable expands one motherboard PWM fan header to support up to five internal cooling fans at the same time to reduce the load on the motherboard.
  • Easy Installation - Simply plug the PWM case fan splitter into the motherboard and attach the other end to the chassis with the double-sided adhesive.
  • Flexible Use - The PWM 5 way PC fan splitter can be used as a 4 pin fan splitter for most motherboard cooling fans. Our pc fan extension cable offers greater flexibility between motherboard and CPU cooling fans.
  • Designed for Performance - The connector types of the PWM fan extension cable includes 1 TX4 4-pin Female, 1 TX4 4-pin Male for CPU fan (including Detect tach pin), and 4 TX4 4-pin Male for case fan.
  • Money-back Guarantee - Backed by our manufacturer’s warranty, if your fan splitter extension cable falls short of your expectations for any reason, contact us for a full refund.
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

3 Pack PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin)

  • PC fan splitter cable：these 27 cm extension cables allow you more choice in where you want to position your PWM or fans inside your case, good for your daily use.
  • This Y-type splitter cables is convenient for running three fans on one fan header.
  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header ；Every Pack Compatible With 1 pcs 4 Pin + 2 pcs 3 Pin PMW Fan Connector.
  • CPU fan splitter cable Product function:provide two additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis.
  • The 4-pin connector supports 3-pin and 4-pin fans.
  • Temperature control: the pwn fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
  • Supports 3 PWM fans from a single motherboard PWM header.
  • Compatible with 4pin PMW fan connector and 3pin fan connector.
Check Stock