Reviews 4 Post 3 5 Ton

Goodman 4 Ton 15 Seer Heat Pump System with Multi-Position Air Handler

  • This listing includes Goodman 4 Ton 14 SEER Heat Pump, Goodman 4 Ton Multi-Position Air Handler, Thermal Expansion Valve (TXV) for a 3.5-5 ton R-410a.
  • This comes with a 10-year parts limited provided it is installed by a qualified installer and registered online.
  • Accessories such as Linesets, thermostats, LP conversion kits, Sold Separately.
Check Stock

B&W Trailer Hitches 1067 Chevrolet and GMC Gooseneck Hitch

  • Fits: 2001-2010 Chevrolet and GMC 3/4 Ton HD Long and Short Bed Trucks.
  • Fits: 2007-2010 Chevrolet and GMC 1 Ton (1 bed crossmember over the axle).
  • Bolts to existing holes in the frame with no drilling or welding.
  • solid, one-piece machined receiver socket.
  • Flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball.
Check Stock

Superlift | 91335 | Bullet Proof Rear Hose | Single Hose | Fits 1971-1987 GM Pickup; 1971-1991 Blazer/Suburban with 4-6" Lift Kit

  • 1971-1991 Blazer / Suburban with 4-6" Lift Kit.
  • Bulletproof Brake Hose - Rear - 1971-1987 GM Pickup 1/2 and 3/4 Ton Solid Axle Pickups and 1971-1991 Blazer Jimmy and Suburban 1/2 and 3/4 Ton Solid Axle with 4-6 inch Lift Kit.
  • Stainless braided brakes hose (1) with crush washers Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.
  • Bulletproof Brake Hose - Rear - 1971-1987 GM Pickup 1/2 and 3/4 Ton Solid Axle Pickups and 1971-1991 Blazer, Jimmy and Suburban 1/2 and 3/4 Ton Solid Axle with 4-6 inch Lift Kit.
Check Stock

OTC 1779B 12-Ton Capacity High Profile Jack Stand - 33-3/4 to 44-1/4 Inch Range

  • OTC's Heavy-Duty, 12-Ton (24,000 lb.) capacity, high profile jack stand has the strength and stability needed for big jobs.
  • Rugged formed and welded steel construction incorporates a large spun steel foot that won't dig or sink into asphalt, sand, or other soft surfaces.
  • Round tube center post features 9 height adjustment settings.
  • high strength steel locking pin is attached to the stand with a chain so it can't go missing.
Check Stock

KAKA Industrial HB-8 Heavy-Duty 8 Ton Hydraulic Roll Cage Tube Bender, Solid Construction and High Precision Metal Tube Bender with 5 Dies

  • HIGH STABILITY. KAKA Industrial 8 ton hydraulic roll cage tube bender features as study design and solid steel frame.
  • the 8 ton forming jack will guarantee the stability when it is in use.
  • HIGH PRECISION. The precise tubing bending process can be realized with the support of steel forming dies and cast followers, which leave the material without flattening or defaming the edges.
  • FIVE DIES ARE INCLUDED. There are 5 different dies are delivered with this bender.
  • they are 3/4", 1", 1-1/2", 1-5/8", 1-3/4" diameter for round tubing.
  • SOLID CONSTRUCTION. The 8 ton tubing bender is build with quality material that can be lasted for many year heavy use. The solid steel frame and cast-iron base will both guarantee the durability of usage.
  • EASY OPERATION AND HIGH FLEXIBILITY. The tubing bender is hydraulic backed and hand-operated. The maximum bending angles can up to 90 degree. Five different dies allow quick change and increase flexibility. It would be a great tools for people who want to customize the tube components.
Check Stock

(32 Pack) New Wood Fence Post Black Caps 6X6 (5 5/8\) Pressure Treated Wood Made In USA (32)

  • 4x4 (3-5/8" x 3-5/8") Plastic Black Fence Post Caps - 16 Pack.
  • Cap presses over the outside of a 4x4 (3-5/8" x 3-5/8") Post, a little flex, but will Not Stretch. Must be secured with nails or an adhesive that bonds to plastic and wood, should be pre-drilled if securing with nails.
  • Inside Dimension 3-5/8" x 3-5/8" Square, 1/8-inch-thick to protect your treated posts from water and sun damage.
  • Please take time to measure your post not all 4x4 post are the same dimension. These caps for Nominal 4X4 fence post that measure 3-5/8"x 3-5/8".
  • Dimensions - Measures Approximately: Inside Dimension: 3-5/8” x 3-5/8 inches.
  • Inside Cap Edge Height (Edge that Covers Post): 1/2 inch.
Check Stock

Air Lift 57212 LoadLifter 5000 Air Suspension Kit

  • Fully adjustable air springs to level your vehicle when towing or hauling a heavy load for a safe comfortable ride.
  • Up to 5,000 pounds of load leveling capability.
  • Easy to install with included detailed instructions.
  • Fitment details listed in the product description. Fits many 3/4 ton and 1 ton pickups and vans.
  • Lifetime Warranty with 60 day Ride Satisfaction Guarantee.
Check Stock

Porto-Power B65115 Black/Red Hydraulic Body Repair 19 Piece Kit - 10 Ton Capacity

  • Automatic pump overload system protects against damage to rams and equipment.
  • Heavy-walled extension tubes stand up in the toughest situations.
  • Flex head features permanently molded rubber pad - interlocked to prevent seperation.
  • 1/2 ton capacity hydraulic spreader features 2" jaws and spreads from 5/8" to 3-3/4".
Check Stock

DAYUAN 12pcs Bearing Separator Puller Set, Heavy Duty 5 Ton Capacity 2\ and 3\ Bearings Splitters Puller Kit

  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs.
  • Can remove bearings from a shaft, split bearings, and separate flywheels.
  • Can be used separately or with other pullers or tools.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity.
  • Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw.
Check Stock

General Motors 12564763, Serpentine Belt

  • C/K Pickup, 5.0 & 5.7L, with ac. Express, savana. 5.0l. S-series. 4.3L, with ac. 5.0 & 5.7L, with ac. Without 105 amp alt. Fan, with pmp, ac, alt, p/s. 1/2, 3/4 & 1 ton, 1996 new style, gas engine, 4.3, 5.0, 5.7l with ac, 124, 130 amp alt..
Check Stock