Reviews 4 Cutting Edges Drill

BOSCH IMSDC002 2 pc High-Speed Steel Impact Tough Turbo Step Drill Bit Set

  • Cordless step drill bit design – made for smooth drilling in cordless drills using high-speed and low-speed mode, with 2X cutting edges and optimized angles on the bit steps.
  • Hex shank impact-ready step drill bit – optimized for impact drivers, and the bits are drill/driver compatible.
  • 2X cutting edges – provides 2X faster cutting through tough material, with two sharp edges.
  • 2X longer life and clean holes – designed for burr-free holes, these bits help manage heat for longer bit life.
  • 2X holes per charge – features efficient operation to boost user productivity.
Check Stock

IRWIN Drill Bit Set for Wood, 3-Piece (3041003)

  • Fits all standard 1/4-Inch quick change chucks.
  • Wood drill bit set features bits with a tri-flute design for faster chip ejection.
  • Cutting spurs have 3 cutting edges for added durability.
  • Grooved hex shank prevents slipping in drill chuck or bit extension.
Check Stock

XtremeAmazing Set of 5 HSS NPT Pipe Tap Set 1/8, 1/4, 3/8, 1/2 and 3/4 Inch

  • Taps Size: 1/8''-27 NPT, 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT.
  • High quality HSS material, cutting edges clean and sharp..
  • With a center hole drilled in all taps, easy to use in a drill press..
  • Package Contents: 5 x NPT Pipe Tap SetHigh quality HSS material, cutting edges clean and sharp..
Check Stock

Annular Cutters Set 13pcs,2'Cutting Depth,3/4''Weldon Shank,(7/16,1/2,9/16,11/16,5/8,3/4,13/16,7/8,15/16,1,1-1/16)inch Cutting Diameter Annular Cutter,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2pcs Pilot Pins

  • Annular Cutter Kit 2" cutting depth,includes 11 pcs high speed steel annular cutters,Cutting Diameter(7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16") and 2 pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

PHITUODA 1-3/4 Inch / 45mm Diamond Drill Bits, Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 1-3/4" / 45mm, Shank Diameter is 3/8" / 9.8mm, Total Length is 2.18" / 55.4mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 45mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you....
Check Stock

PHITUODA 4-1/2 Inch / 115mm Diamond Drill Bits, Large Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 4-1/2" / 115mm, Shank Diameter is 3/8" / 9.6mm, Total Length is 2.19" / 55.6mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 115mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident y....
Check Stock

Annular Cutters 8pcs/Set,2''Cutting Depth,3/4''Weldon Shank,(9/16,11/16,13/16,15/16,1,1-1/16)inch Cutting Diameter Annular Cutters,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2 pcs Pilot Pins

  • Annular Cutter Kit includes 6 pcs high speed steel annular cutters,2"Cutting Depth,Cutting Diameter(9/16", 11/16'', 13/16'', 15/16'', 1“,1-1/16) and 2pcs pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

IRWIN Speedbor Max Drill Bit Set, 8-Piece (IWAX128PC)

  • Visible clear lid of the drill bit set are desgined for easy viewing of contents.
  • Stackable - for convenient travel and storage of the drill bits for wood.
  • Accessible drill bits for wood are made for customizable kits.
  • Chamfered cutting edges for increased durability.
  • Patented Blue Groove parabolic scoop for faster chip removal.
  • Designed for impact drivers with 1/4-inch impact rated shank.
Check Stock

2022 Upgrade Heavy Duty Carbide Hole Saw,Metal Steel Hole Saw Drill Bit ,TCT Hole Cutter-Alloy Hardness Upgrade, Life Upgrade,Use for Stainless Steel, mild Steel, Iron, Copper,etc (19mm|3/4″)

  • 【2022 latest improvements】: professional grade drilling, upgraded the blade of the alloy, so that the sharpness, product life greatly exceeded other styles on the market, than the other same alloy opener service life of about 10 times longer than. Process improvements make the product drain better, faster heat dissipation, and smoother..
  • 【Fast & Precise Cuts】: the use of three blade design, noise compared to other home single blade, noise is lower, cutting more smoothly. Alloy blades are tilted 5 °, making cutting easier..
  • 【Product Specifications】:Cutting diameter: (19mm|3/4″) Cutting deapth:63/64″(25mm).
  • In the package Includes a drill, and 2 springs.
  • 【High Quality Material】The blade is made of nano tungsten carbide alloy, which is more costly, better quality, and the overall amount is more adequate, and the product is heavier. And the hardness is higher, rust-proof and durable..
  • 【Multiple material applications】:This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Ideal for stainless steel, metal, iron, aluminum, FRP, mild steel,plastic,wood(NOTE:Burrs on the edges when used on wooden materials,DO NOT used for Glass,concrete, tiles and stone!!!).
Check Stock

amoolo 10-Pack Countersink Drill Bit Set with 1 Free Hex Key Wrench, 7 Pcs High Carbon Steel Countersink Drill Bits for Wood, 3 Pcs Hex Shank Wood Countersink Bits (1/2\ 5/8\ 3/4\), Woodworking Carpentry Reamer

  • ...es of Ø12mm(1/2"), 16mm(5/8"), 19mm(3/4") A 1/10”(2.5mm) Free Hex Key Wrench Plus. Come with a portable plastic case for easy convenient select, storage and organization..
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects..
  • 【EFFICIENT DESIGN】For 7 countersink drill bits, 3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling.
  • 2-spiral flute makes chip removing easy and efficient. For 3 countersink bits, 90°on the point & 1/4" hex shank for quick change make the countersink process convenient. All drill bits get 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness..
  • 【REMOVABLE& ADJUSTABLE】Perfect for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, PVC and soft metals. Suitable for hand drill, bench drill and electric drill, #12,#16, #19 are especially fine for quick drill.The drilling depth of countersink drill bits are adjustable by screws with various lengths.
  • Meanwhile, their bits are removable for easy cleaning, s....
Check Stock