Reviews 3d Printer Parts And Accessories

Creality CR10 Heat Bed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm

  • Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W.
  • Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S.
  • Hot Bed Size:310x310x3mm，Hotbed With Cable Which be Installed Well..
  • We only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S.
  • if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause..
  • WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support..
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

Ender 3 Hotend 3D Printer Extruder Assembled MK8 Hot End Kit for Ender 3/Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • 100% Creality 3D original and high quality 3D printer accessories.
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro 3d printer.
  • Tip of the nozzle, Aluminum Heating block, Throat Pipe (Built-in Teflon).
  • MK8 extruder hot end kit with thermistor and heater,24V 40W.
Check Stock

12 Pcs 3D Printer Heatbed Parts Silicone Leveling Solid Bed Mount Heat Resistant 3D Printer Parts Heat Buffer Silicone Heat Bed Parts Compatible with CR-10 Ender 3 Bottom Connect (Brown, 0.7 Inches)

  • Ample Amount: the package contains 12 pieces of 3D printer heatbed parts in brown, which are designed to replace your springs under the heated bed, sufficient quantity can meet your daily use and replacement needs.
  • Silicone Material: the 3D printer bed mounts are made of quality silicone material, stable and flexible, with nice heat resistant feature, can nicely reduce the vibrations when working, providing good leveling performance for your 3D printer.
  • Compatibility: the silicone bed leveling mounts are compatible with CR-10 and Ender 3 series 3D printers, they will install effectively and stably on your 3D printer, will not easily move.
  • Suitable Size: the heated bed mount measures approx. 4 mm/ 0.16 inches in inner diameter, 18 mm/ 0.7 inches in height, which is easy to level your 3D printer and remain your set levels.
  • Simple to Store: with compact size and lightweight, the 3d printer parts are easy for you to store in your tool box, occupying a little space, also very convenient to take out when needed.
Check Stock

YOUSU Flexible TPU 3D Printer Filament Black TPU Filament 1.75mm 1kg, Dimensional Accuracy +/- 0.03 mm, 95A Shore Hardness and Good Layer bonding Performance.

  • [ 95A Shore Hardness Flexible 3D Filament ] – Yousu Flexible Filament Enables you print shoe insole, phone case, sporting goods, medical devices, automotive instrument panels..
  • [ Strong layer bonding like injection parts ] –1Kg TPU filament Spool has Unique recipe enables the printing parts function similar like TPU injection parts..
  • [ Good compatibility ] – Yousu 3D Printing Filament Suitable for many existing 3d printer in the market. Such as Raise 3D, Makerbot Replicator 2 & 2x, Flashforge creator pro, Monoprice MakerSelect, Prusa i3, iDo, Troxy, Wanhao… Before purchase, it is better to consult with your 3d printer supplier whether the printer can print flexible 3d filament..
  • [ No warping & Precision Diameter ] – Yousu TPU Filament has excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good diameter control..
  • [ Technical support available ] – All Yousu Filament come with a guarantee,human technical support are provided..
Check Stock

TRONXY X5SA PRO 3D Printer with Glass Bed Upgrade, Full Metal Frame CoreXY Printer with Auto Leveling, OSG Guide Rail+Titan Extruder+Silent Board, Large Build Volume 330×330×400mm

  • ...table for manual skills and experienced large 3D printer enthusiasts, transforming machines and building shell/parts, etc. Add more fun for your 3d printing, stronger power support and smoother transmission, get a larger and finer printed model.
  • [Service Guarantee] - Receiving the TRONXY coreXY 3D printer- Check the accessories - DIY assembly machine - Set the distance from Z-off first - then auto-leveling. Any problem, contact us for solution(Your Account>Your Orders>Contact Seller).
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

Siraya Tech Cast 3D Printer Resin Castable LCD UV-Curing Resin Easy to Print Use and Burn High Resolution 405nm Photopolymer Resin for Making jewelries and Metal Parts (Purple, 1kg)

  • Easy to Use - Our Siraya Tech Cast 3D Printer Resin is easy to use, it does not require a very dry environment or special additive to print and burn well, and this castable 405nm standard photopolymer resin has good plate adhesion. Both new users and experienced users can easily print the model..
  • Easier to Burn - This castable 3D printer resin material contains some wax, so it is easier to burn than many non-wax-based casting resins. This Siraya Tech Cast rapid resin is very suitable to be used in the production of small metal parts, which can fully demonstrate the core of the part..
  • High Resolution - Siraya Tech Cast 3D printer resin uses a unique and beautiful purple color, and the printed model has a high resolution and smooth surface. Its high resolution allows the model to be printed with precise details, which will make your model look great..
  • Easy to Print - This Siraya Tech Cast 3D printing resin can print quickly and has a high resolution, is easy to print. This Cast LCD UV-Curing resin is very easy to use and dye, and is a castable resin for jewelers and small metal parts..
  • Wide Applications - Cast by Siraya Tech was developed as an affordable castable 3D printer resin by jewelers for making rings and pendants, by engineers for small metal func....
Check Stock

Vintage Retro 3D Printer Tee Gift idea for Geeks T-Shirt

  • 3D Printer Tee Gift idea for Geeks Design the perfect funny 3D Printer tee for christmas or as a birthday present for this great hobby. This 3d....
  • Vintage Retro 3D Printer Accessories and 3D Printing Gift.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Siraya Tech Blu Nylon 3D Printer Resin Nylon-Like Strong and Precise High-Resolution 3D Printing Resin 405nm UV-Curing Rapid Resin for LCD DLP 3D Printer(1kg, Nylon Black)

  • High Toughness - This Blu Nylon 3D printer resin is even tougher than regular Blu. It maintains a good balance between hardness and impact resistance and is an ideal choice for making strong but flexible functional parts. Compared with other resins that are too brittle, this Siraya Tech Blu Nylon resin can withstand accidental drops from time to time without breaking easily..
  • Wide Applications - Blu Nylon 3D printer resin has a strong and precise high resolution, so it is very suitable for use in the production of functional parts, such as brackets, bases, and parts that require handling the load without changing the shape. Siraya Tech Blu Nylon resin is compatible with most LCP and DLP 3D printers..
  • Precise Prints - Blu Nylon black 3D printing resin can be printed accurately, allowing you to print the finest details, and has good fluidity, allowing the model to be printed and cured quickly. The viscosity of this rapid resin is very high, it is recommended to print at 25°C..
  • Precise High Resolution and Surface Finish - Siraya Tech Blu Nylon 3D printer resin has excellent colors, a very smooth surface, and strong and precise high resolution, making your model look great, with precise details..
  • Works Great As Additive - Siraya Tech Blu Nylon Black 3D....
Check Stock