Reviews 3d Printer Cooling Fans

Icstation 50mm x 50mm x 10mm 5010 2 Pin 12V 0.1A Silent Quiet DC Brushless Cooling Fan for 3D Printer Computer Case Fan (Pack of 2)

  • 50x50x10 mm Quiet cooling fan, 12v, 2700-3300 RPM, 30,000h MTTF. They are durable and you don’t need to buy another small fan in the next 30,000 hours..
  • Use these 23 dB cooling fans to get near-silent operation. Ideal replacement for noisy or broken 12V 5cm fans in 3D printers, DVD players, DVRs, switches, other network and storage devices, etc..
  • The fans can be run 2700 to 3300 rpm by fine-tuning the fan for maximum airflow(8.5 CFM).
  • You will need a battery pack/power supply that supplies 12vdc and has a capacity sufficient to provide 100ma to make the fans run. A 2.5mm pitch 2-pin connector makes it compatible with your computer motherboard or 3D printer power system..
  • Please kindly contact Icstation Service Team if you received a damaged product. We provide free replacement and technology supports..
Check Stock

LOTMAXX Shark V3 FDM 3D Printer Auto Leveling, 3D Printing/Laser Engraving/Dual-Color Multifunctional 3D Printer Printing Size 9.25x9.25x10.43in & Engraving Size 9.25x9.25in

  • Multifunctional 3D Printer: LOTMAXX Shark V3 is an FDM 3D printer with higher printing accuracy and speed. And it also supports two-color printing and laser engraving. The 1.6 W laser engraving allows you to engrave with a wide variety of materials like bamboo, ceramic tile, wood, leather, paper, etc..
  • Smart & Precise 3D Printer Auto Leveling: LOTMAXX Shark V3 3D Printer equipped with intelligent leveling tools. When using the product for the first time, it is recommended to level it manually before turning on automatic leveling to ensure printing accuracy..
  • Super Fast Cooling & LED Decoration: Structured dual extruder with 3 fans and 3 modes, supporting dual-color printing. Compatible with PLA/PLA+/Ultra filament. The Shark V3 print head is also equipped with led decoration. Not only can light up the darkness but also can fully enjoy the fun of printing..
  • Filament Sensor and Power Off Resume Printing: LOTMAXX Shark V3 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • Removable Touch Screen & Nano-coated Glass Plate: The TFT to....
Check Stock

Creality Ender 7 3D Printer Metal Dual Extruder, Beyond Fast Printing Speed 250MM/S, Core XY, Carborundum Glass Bed, Exclusive Rapid-Power Motor & Large Volume Nozzle, Build Size 250x250x300mm

  • Extreme Fast Print Speed-250mm/s: The printing speed of Ender 7 3D Printer is 250mm/s, which is nearly 5 Times faster than previous models. It is equipped with dual motors that work in parallel, so that the entire body can be better coordinated, so it can complete higher-level printing..
  • Newly-developed for Geek & Professional: This Ender 7 is specially recommended for Geeks & Professionals. It has more powerful functions than other models with the support of printing size-250 x 250 x 300mm and has a machine tool made of silicon carbide glass. The space of the machine tool has also increased to 4000 cubic millimeters. It is equipped with dual cooling system that can provide strong extrusion force when working..
  • Dual Cooling Fans: Ender 7 3D printer is equipped with dual fans, which can cool the machine in time and quickly during high-speed printing. Its fan is equipped with a high-performance butterfly-shaped wing air duct, so that this Ender 7 can inhale 169% more air than previous models. It can provide a good working environment for the machine, and make the extruded filaments smoother and more textured..
  • Core XY design: All stepping motors designed for Ender 7 Core XY printers are fixed, and the print bed moves vertically. This makes the tool head t....
Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

  • ...ce for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing..
  • 【DUAL PART COOLING FANS EXTRUDER】✔️Two part cooling fans of Creality large 3D printer are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage..
  • 【UPGRADED SILENT MOTHERBOARD】✔️ CR-10 v3 3D printer has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard..
  • 【ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE】✔️ Creality FDM 3D printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes CR-10 V3 more Likely to print out with high accuracy prints..
  • 【WARRANTY】✔️ Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replac&....
Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

  • Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Connector: 2 Terminal Connector with 2pin-ph2.5.
  • compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
  • 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

SoundOriginal Brushless DC Cooling Fan 24V 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (Black 24Vx1)

  • 1pcs Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Air Flow : 6.9 CFM.
  • Connector: 2 Terminal Connector with 2pin-ph2.54.
  • compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance..
  • DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.06A.
  • Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

TL TENLOG TL-D3 V2 Independent Dual-Head 3D Printer WI-Fi Function Silent Motherboard TMC2209 Driver 400W Power Supply Support PVA TPU ABS PLA BMG extruder 11.8 x11.8 x13.8

  • 【INDEPENDENT DUAL EXTRUDERS】:Our TL-D3 V2 dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual....
  • 【32-Bit Motherboard】: The main chip is upgraded from 8-bit to 32-bit, and the printer runs more smoothly The 32-bit motherboard supports wifi and....
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
  • 【Upgraded PEI Magnetic Board】: TENLOG upgraded PEI magnetic board, which makes the printed matter fit better and will not warp. Even the first....
  • [Super cooling module]: The fans of the two nozzles can be controlled independently. The side fans of the nozzles use two blower fans to dissipate....
Check Stock

WEEDO 3D Printers for Beginners Mini 3D Printer for Kids Full Auto Leveling Wi-Fi Printing Fully Assembled Small Enclosed FDM 3D Printers for Home Use PLA/TPU Filament Supported TINA2 Upgrade

  • 3D Printers Wide Application: With the support of printing models of Toys, Art crafts, Little architectural building, automotive, aerospace etc, the....
  • Smooth and Beautiful Printing Effect: The X1 diy 3d printer kit supports a print size of 100*100*100MM, a PLA filament of 1.75 mm ( Diameter ) and an....
  • Kids 3d printer Easy Operation: User can set Filament feed-in or draw out with the buttons of + and -. In addition, Start/Stop/Resume Printing....
  • Easythreed 3d printer Cooling Fan: There is a cooling fan for dissipating heat ensuring the machine works in a favorable status.
  • Mini 3d Printer Silent printing: The X1 mini portable 3d printers for home use finishes every printing model quickly and efficiently, never disturbs....
Check Stock

Anbull 3D Printer for Beginners Teens Kids Mini 3D Printer Nano Plus with Cooling Fan in Nozzle Upgraded Removable Hot Magnet Build Plate 1.75mmx10m PLA Filament Printing up to 3.5 x 4.3 x 4.3 Inch

  • 3D Printers Wide Application: With the support of printing models of Toys, Art crafts, Little architectural building, automotive, aerospace etc, the....
  • Smooth and Beautiful Printing Effect: The X1 diy 3d printer kit supports a print size of 100*100*100MM, a PLA filament of 1.75 mm ( Diameter ) and an....
  • Kids 3d printer Easy Operation: User can set Filament feed-in or draw out with the buttons of + and -. In addition, Start/Stop/Resume Printing....
  • Easythreed 3d printer Cooling Fan: There is a cooling fan for dissipating heat ensuring the machine works in a favorable status.
  • Mini 3d Printer Silent printing: The X1 mini portable 3d printers for home use finishes every printing model quickly and efficiently, never disturbs....
Check Stock

Creality Halot-One Resin 3D Printer, 6" Monochrome LCD Screen UV Resin Printers with High-Precision Integral Light Source Fast Printing WiFi Control Dual Cooling & Filtering System Easy Slicing

  • 【High-precision Integral Light Source】Creality resin 3d printer halot-one with the self-developed integrated light source adopts reflection and refraction, compared with the directional matrix light source, 20% increase in precision and uniformity increased to 80%, greatly improving the gloss and fineness of the model, avoiding uneven curing, overexposure, printing defects and other problems..
  • 【Fast Printing】Creality halot one 3d resin printer is equipped with a 5.96-inch monochrome LCD screen with 2K HD 2560x1620 resolution, only taking 1-4s/layer exposure to cure resin, , which can significantly improve the printing efficiency while maximizing model detail and save you time..
  • 【High-Performance Motherboard】Halot one resin printer is equipped self-developed mainboard of new generation boasts a main control chip equipped with the ARM cortex-A53 and 64-bit quad-core powerful computing and image processing functions ensure smooth operation and consistent printing accuracy and efficiency..
  • 【Dual Cooling & Filtering System】Built-in activated carbon filter can effectively absorb and filter the resin odor ....
Check Stock