Reviews 3d Printer Calibration Prints

FlashForge Finder 3D Printer with Cloud Wi-Fi USB for Education and Family Use Red

  • Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily. At the same time, it can minimize....
  • The patented nozzle structure has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model and....
  • Finder features an intuitive calibration detection system to assist leveling. you’re well instructed with clear messages on the touchscreen display.....
  • Out of box,lower energy.A fun STEM educational experience in mechanical engineering and electronics..
  • Flashforge 3d printer Finder,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

3D Printers, Mini 2-in-1 3D Laser Engraver Printer with Removable Heated Bed, DIY Desktop 3D Printers for Beginners with PLA Filament, Smart Control, Resume Printing, 90% Pre-Assembled

  • 3D Printer for Beginners - The CRUX-1 is an intuitive and user-friendly 3D printer that's perfect for both professional users and beginners. Its 2.8-inch LCD touchscreen displays the real-time printing progress and supports eight languages, making it easy for everyone to use. Unlike other products with exposed power supplies, the CRUX-1 has an integrated modular design that includes a built-in power supply for enhanced safety. Enjoy the fun of DIY 3D printing!.
  • 2-in-1 Innovative 3D Laser Printer - The CRUX-1 2-in-1 3D Printer unleashes your full creative potential, allowing you to switch between 3D printing and laser engraving. Its large rotary nuts make the leveling process easier, while the hotbed comes with a replaceable fiberglass sheet. The printer is compatible with Windows, Mac OS, and Linux systems, and you can operate it through a TF card, USB flash drive, or USB cable (which is included)..
  • Lightweight and Portable 3D Printer - This mini FDM 3D printer is lightweight, portable, and quick to assemble. Its compact size of 7 x 7 x 7 inches (180 x 180 x 180mm) makes it ideal for students and DIY enthusiasts. It comes with a convenient handle for easy ....
Check Stock

Silicon Power 64GB 2-Pack 3D NAND High Speed MicroSD Card with Adapter

  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. And it is turning more and more into a full-on 3D printer operating system.
  • Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways.
  • Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
  • Supports create awesome timelapse recording of all your favorite 3D prints and so much more.
Check Stock

Creality 3D Ender 7 3D Printer Core-XY Structure 250mm/s High-Speed Printing All Metal Dual Gear Extruder Build Volume 9.8in(L) x9.8in(W) x11.8in(H)/250x250x300mm (Ender 7 Black)

  • 6. Powerful Performance: Carborundum glass hotbed, resume printing, silent printing, Creality power supply, large printing size, filament Detector, 9 languages supported, powerful performance make Creality Ender-7 more friendly..
  • 7. Easy to install & supports to be retrofitted to Auto-Calibration System: Ender-7 FDM 3D Printer features a modular structures design for a easy install, allowing for quicker installation than other frame structures.
  • Also, it supports to be retrofitted to an Auto-Calibration System..
  • 8. Glass Platform Hotbed: The latest Ender 7 3d printer is equipped with a carbon crystal silicon glass printing bed. The glass platform allows the hotbed to heat up faster and prints to adhere better. In addition, the glass bed can withstand higher temperatures than the magnetic bed, and it has super smoothness even on the first layer, making it easier for you to take the model after printing..
  • 9: Multi-Language Interface: The new version now supports 9 languages, allowing global customers to operate 3D printers more conveniently and without barriers. The 9 languages are Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, and Turkish..
  • 10: A customized high volume nozzle: the volume of the melt....
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

  • 【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
  • 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
  • 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
  • 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
  • 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock