Reviews 3d Printer Build Plates

FULAMENT Fula-Flex Resin Sheet for 3D Printing - 150mm x 95mm - Flexible Stainless Steel Printer Build Plate

  • [ EASY TO INSTALL ] - Fulament’s resin build plate is very easy to install and use! Simply align the magnetic sticker, remove the paper backing from....
  • [ EASY TO REMOVE PRINTS ] - Keeping our customers’ needs in mind, we built a 3D printer build plate that increases printing success. Our 3D printing....
  • [ WHY FULAMENT ] - Unlike other resin flex plates who use spring steel, we use a spring tempered magnetic grade of Stainless Steel. Ensuring that the....
  • [ COMPATIBILITY ] - This 150mm x 95mm resin plate fits Elegoo Mars 3.
  • [ FULAMENT'S PROMISE ] - Fulament is a USA-based company. Our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed....
Check Stock

MINGDA Removable Magnetic Build Plate Flexible Heatbed Mat 235x235mm for 3D Printer Hot Bed Platform

  • 【PACK of 4】The 220mmx220mm (8.7" x 8.7") 3D Printer build plate is fully matches heated bed for large format printers such as the Creality MK2,....
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature....
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides....
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible....
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer a 90 day money back guarantee!.
Check Stock

Entina 2 Pack Flexible and Removable Magnetic Build Plates for Tina 2 3D Printer 110 X 120MM

  • 【2 Pcs Build Plates for Tina 2】The size of build plate is 110x120mm. Suitable for Tina 2 3D printer. The smooth and flat surface is flexible and....
  • 【Strong Adhesion】The adsorption force of the 2 pack build plates is strong, so that the prints can be sticked on the surface firmly. After....
  • 【Flexible Removable Magnetic Bed】Separation type bending to take off the model. Do not need the removal tools and scraper to assist the model.....
  • User notes: Please do not remove the yellow sticker when printing, which will protect the printing platform from damage. (yellow sticker can be....
Check Stock

DOBSTFY 3D Printing Build Surface 3D Printer Heat Bed Platform Sticker Sheet 8 x 8 200x200mm Square - Pack of 4

  • 【PACK of 4】This 200x200mm (8"x8") Build Surface for Anet A8 WanHao i3 Detachable 3D Printers DYI, square, fully matches heated bed on many popular....
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature....
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides....
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible....
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours....
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

  • 【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
  • 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
  • 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
  • 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
  • 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room....
Check Stock

PVA Glue Stick 3D Printing, FYSETC 3D Printer Parts 3Pcs Solid Adhesive for 3D Printer Ender 3/ Ender 5/ CR10 / Prus Mini MK52 MK3 Hot Bed Print Filament PLA Glass ABS PETG CPE

  • Wide Compatibility: Work well on all 3D Printer hot bed, including spring steel build plate, aluminum or glass bed, PEI sheet, 3d printer stickers etc..
  • Convenience: Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water..
  • Help in 3d printing: Paste it on hot bed beforce printing, strong adhesion to the hot plate, perfect first layer. It is easier to remove the printing models..
  • High-quality and Long-lasting: last for 100+ average prints, helps 3D print parts adhere to the build plate during printing..
  • Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 12\ x 12\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

Gizmo Dorks 3M 468MP Adhesive Transfer Tape Sheets 10\ x 10\ (5-Pack)

  • Standard for applying PEI sheets or other print surfaces on to 3D printing build plates. Also industry standard for graphic attachment and general industrial joining applications..
  • High performance acrylic adhesive performs well after exposure to humidity and hot/cold cycles. Heat resistance of up to 400 F. Great for 3D printing applications, since 3D printer heated bed temps remain within that range..
  • Excellent shear strength to resist slippage and edge lifting. This is important when having a level and sturdy bond is required..
  • Cut to size for easy application with no mess. Peel off the polycoated kraft paper liner when ready to use, and apply to clean surface..
  • Double sided adhesive tape is great for adhering, bonding, mouting, holding, and attaching PEI to print beds..
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock