Reviews 350z Plenum Spacer Gains

Boomba Racing INTAKE MANIFOLD SPACER SILVER Compatible with Ford Focus ST RS 2.0 Fusion

  • Perfect replacement for 350Z roadster 2003‑2009 (non RevUp engine) and so on to meet your needs..
  • Specifically designed to help increase the manifold capacity and lower the intake air temperature..
  • Easy to install, direct to replace, no need any complicated tools or operations to save your time..
  • The manifold spacer is made of thermal polymer, comes with dramatic heat insulating properties..
  • According to the original factory specifications, replacing reference OEM number is BXIM‑40201..
Check Stock

Skunk2 Racing 307-05-0260 Pro Series Silver Intake Manifold for Honda D-Series Engines

  • Made from highest quality A356 cast-aluminum.
  • Larger Plenum and oversized runners for maximum power gains.
  • Improved airflow and enhanced venturi effect.
  • Bolt-on fitment compatible with all OEM sensors.
  • 66mm throttle body opening can be port-matched up to 70mm.
  • Ideal for turbocharged and naturally aspirated applications.
  • Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar.
  • Fitment: 1988 - 2000 Honda Civic (1.6L CX/DX/EX/GX/HX/LX), 1993 - 1997 Honda Del Sol (1.6L S/Si) and 1988 - 1991 Honda CR-X (1.6L S/Si).
Check Stock

Intake Manifold Plenum Spacer, Easy Installation BXIM‑40201 Heat Insulation Thermal Shield Plenum Spacers for Car Replacement for Infinit G35 Sedan 2003-2006

  • Specifically designed to help increase the manifold capacity and lower the intake air temperature..
  • Easy to install, direct to replace, no need any complicated tools or operations to save your time..
  • Perfect replacement for 350Z roadster 2003‑2009 (non RevUp engine) and so on to meet your needs..
  • The manifold spacer is made of thermal polymer, comes with dramatic heat insulating properties..
  • According to the original factory specifications, replacing reference OEM number is BXIM‑40201..
Check Stock

Hubcentric Wheel Spacer Set of 4-5 Lug 1 inch Thick 25mm Hub Centric 5x114.3mm - Compatible with Nissan and Infiniti Vehicles - 350Z, 370Z. Altima, Maxima, Pathfinder, Rogue, Sentra, G35, JX35, FX35

  • Hubcentric Wheel Spacer Kit 4 5X4.5" 1 Inch Thick - Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
  • Compatible With Nissan & Infiniti Vehicles - 2003 - 2012 FX35 | 2003 - 2008 G35 | 2008 - 2013 G37 | 2014 - 2019 QX50, QX60, QX70 | 2003 - 2009 350Z | 2009 - 2018 370Z | 2002 - 2018 Altima | 2000 - 2018 Maxima | 2013 - 2018 Pathfinder | 2001 - 2017 Quest | 2013 - 2018 Sentra | & more. See below for the full vehicle list..
  • Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits.
  • OEM Fit, Quality, Finish - CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..
Check Stock

ICT Billet CNC Billet Carburetor Spacer 1" Dominator Tall Aluminum 4 Hole 4500 Carb Racing Drag Race 551184

  • Front Engine Plate w/ Alternator Hole Solid Motor Mount.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • 1.0 inch Thick w/ contoured runners to provide maximum horsepower gains.
  • CNC Billet Carburetor High Flow Spacer 1 Inch.
Check Stock

NEW HOLLEY QUICK FUEL 750 CFM BRAWLER RACE CARBURETOR,RED BILLET,BLACK, MECHANICAL SECONDARIES,COMPATIBLE WITH 4150 MODELS

  • Front Engine Plate w/ Alternator Hole Solid Motor Mount.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • 1.0 inch Thick w/ contoured runners to provide maximum horsepower gains.
  • CNC Billet Carburetor High Flow Spacer 1 Inch.
Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

  • Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
  • The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
  • The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
  • NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
  • Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....
Check Stock

Replacement Exterior Door Handle Kit - Replaces 80607-CD41E, 80606-CD01E - Compatible with Nissan 350Z 2003, 2004, 2005, 2006, 2007, 2008, 2009 - Driver and Passenger Side - Year Model 03 - 09

  • Replacement Exterior Door Handle Kit - Allows both the driver side and passenger side door of your 350Z to be opened from the outside. This is a common issue of the 350Z with the plastic pieces being broken inside the door handle due to wear and tear..
  • Compatible Replacement for Nissan 350Z - This replacement door handle for the front left driver and front right passenger side door fits 2003, 2004, 2005, 2006, 2007, 2008, 2009 350Z all with a 3.5L V6 Engine. If you are unable to open the doors from the outside then you may have to replace your door handles..
  • Replaces Part# 80607-CD41E, 80607-CD400, 80607-CD401, 80607-CD40A, 80607-CD40B, 80607-CD40C, 80607-CD40D, 80607-CD40E, 80607-CD41D, 80606-CD01E, 80606-CD00E, 80606-CD000, 80606-CD001, 80606-CD00A, 80606-CD00B, 80606-CD00C, 80606-CD00E, 80606-CD00D, 80606-CD01D usually found on popular 350Z models with years 03, 04, 05, 06, 07 , 08, 09..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is direct replacement part for your factory 350Z exterior door handles and will fit, work and look exactly like the factory part. This exterior door handle kit also has a keyhole for the driver's side of your 350Z..
  • Lifetime Warranty - This replacement part from AA Ignition comes comple....
Check Stock

550MHZ CAT6 Plenum Cable 1000ft Blue, 23AWG 4Pair, Solid Network Cable Unshielded Twisted Pair (UTP), Available in Blue, White, Yellow, Gray, Purple, Green & Black (White)

  • BNCables Cat6 plenum rated Ethernet cable is 23 AWG with 4 pairs (8C). Suitable for 1 Gigabit and 10-Gigabit Ethernet. Bandwidth tested up to 550 MHz..
  • 1000 feet (305 meters) of our Cat6 Plenum Cable has been packaged on a tangle free, easy pull reel/spool..
  • Our Cat6 Plenum jacket is fire safety rated for use in air plenum spaces above suspended ceilings or below raised floors. High degree of flame resistance and low toxicity smoke..
  • CENTER SEPARATOR/SPLINE: The center separator/spline provides the cable extra support to help fight against twists and kinks. It also separates the pairs to further eliminate cross-talk..
  • FOR INDOOR USE: BNCables plenum Rated jacket is fire safety rated for use in air plenum spaces above suspended ceilings or below raised floors..
Check Stock

150 Foot 3.5MM to 2 RCA Plenum CL3P Stereo Audio Cable Male to Male by Custom Cable Connection

  • 3.5mm to 2 RCA Plenum Stereo Audio Cables are specifically designed for quality computer audio applications. CL3P Plenum rated cable with foil shield....
  • Plenum cable must meet two requirements to meet most fire codes: (1) Plenum cable must not burn easily (2)Plenum cable must not emit toxic fumes when....
  • 3.5mm Stereo to 2RCA Cables can be used to extend an audio signal from a smartphone, tablet, MP3 player, 70 Volt amplifier feed, PA, TV's and Stereo....
  • Made in Dallas, TX USA by Custom Cable Connection.
Check Stock