Reviews 317t Voltage Regulator Circuit

uniquegoods 6V 12V 24V 28V 3A 80W DC Motor Speed Controller (PWM) Speed Adjustable Reversible Switch 1203BB DC Motor Driver Reversing

  • 80A CURRENT---The speed controller regulator is of new two-way large power silicon controlled rectifier and the current can be up to 80A, which is a good solution to over-current of electric stove wire caused by low resistance during cooling.
  • STABLE & DURABLE---This voltage regulator is adjusted with button which is much more stable than potentiometer. Voltage regulator has wave voltage absorbing circuit and effective protects large power silicon controlled rectifier, longer service life and more durable.
  • HEAT DISSIPATION ENHANCING---Designed with large and thick heat sink, the speed controller regulator can enhance heat dissipation more effectively.
  • OUTPUT VOLTAGE ADJUSTING---The speed controller regulator can easily adjust the output voltage on a scale of 0-100% (nonlinear) to power electric device.
  • WIDE APPLICATION---The speed controller regulator can be used as power supply for large electrical devices of less than 10000W, enough for household appliances or for small factory, could be widely used as heat controller on electric stoves, water heaters, light dimmer on lamps, speed controller on small motors, or temperature controller on electric soldering iron, etc.
Check Stock

360 Degree Tiny Size 20mm Contactless Digitized Potentiometer Angle Encoder Sensor 0-5v Output 6 mm Shaft

  • Hall Switch Integrated Circuit Using hall Effect Principle..
  • USES The Semiconductor Integrated Technology Manufacturing Magnetic Susceptibility of the Circuit..
  • It is by the Voltage Regulator, Hall Voltage Generator, Differential Amplifier, Schmidt Triggers, Temperature Compensation and the Open Collector Output Stage Circuit Composed of Magnetic Sensitive Sensor Circuit..
  • Its Input For the Magnetic Induction Intensity, the Output is a Digital Voltage Signal..
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • ... to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, ....
Check Stock

Adjustable Digital display 10-55V 60A PWM DC Brushed Motor Speed Controller Switch Control 12V 24V 36V 48V Forward Brake Reverse For power wheels regulation (60A PWM)

  • The input voltage must be equal to the rated voltage of the motor.Wide Voltage: Wide voltage input 10-55V, maximum output current 60A,Continuous current: 40A..
  • Digital display :Motor Rotation Speed Percentage 0~100% ,Accurate adjustment speed.Adjust Output Current Control Motor Speed.
  • Speed Control Knob:Stepless speed regulation ,and with Forward-Brake-Reverse Switch.Only Work for Brushed Motor..
  • Notice 1: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • Notice: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

KeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
  • 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

Trail Tech 7003-AC01 Universal AC Voltage Regulator

  • Improved Universal AC Voltage Regulator with Adjustable Output Universal AC Voltage Regulator limits voltage to 12.0-16.0 volts for AC systems.
  • Conditions circuit to eliminate electrical spikes, protect from lamp blow-outs, and reduce flicker and dimming.
  • “Dial-a-Brightness” allow you to adjust light output at the cost of lamp life for halogen and quartz lights.
  • At 14+ VAC setting, the lamps will approach HID lumens (70 percent) but lamp life is short (good for racing).
  • At standard setting, about 13.8 VAC, the lamps should last about 500 hours, at minimum setting, the lamps are not as bright as HID (30 percent), but last over 1,000 hours.
Check Stock

7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse

  • ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
  • ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
  • ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
  • ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
  • ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock

Voltage Regulator Reducer, 48V 36V to 12V Regulator Reducer Transformer, 10A 120W DC 12 Volt Voltage Regulator, Application for Golf Cart, Club Car and More Car Truck Vehicle…

  • 【CONVERTER VOLTAGE REDUCER】➤➤Converter Input: Voltage: 48V Nominal, Voltage Range: 30 to 60 volt DC(36V/48V).
  • Conveter Output: Voltage: DC 12V(Fixed Output), Current: 10A, Output Power: 120w. Conversion Maximum Efficiency: ≥97%.
  • 【WIDE APPLICATION】➤➤12v voltage regulator apply for golf cart and club car and more car truck vehicle. Convert the 48 volts to the 12 volts needed for the led light/Audio/radio..
  • 【SUPERIOR QUALITY】➤➤Made of aluminium shell and silicone sealed, 12v dc voltage regulator is durable for a long time service. 100% waterproof, anti-dust, corrosion, shock. Golf cart converter can run effectively and safely in the range of -40°C~80°C..
  • 【FUNCTION】➤➤The volt regulator is mainly use to reduce the voltage. Prevent the problems of over-heat /over-current /over-load /short-circuit. Easy to install. Note: We don't provide the installation instructions.
  • 【12-MONTH WARRANTY】➤➤We provide 12 month warranty and lifetime service. If the reducer have any problems, please contact us and we will reply you as soon as possible within 24 hours. This package include 1Pcs Converter.
Check Stock

JOYO JP-02 Guitar Pedal Power Supply Pedal Board Guitar Power Supply with DC 18V Pedal Power Adapter & 9V 100mA 500mA Isolated DC Output for 9V 12V 18V Effect Pedals

  • ...l switch design, the LED array illuminates all effects on the board..
  • 7-channel 9V100mA output, 1 channel 9V500mA output and 12V, 18V output each, to meet the power supply requirements of any different effects..
  • In the JP-02 power supply part, we use the high-current output step-down switching type integrated voltage regulator circuit produced by National Semiconductor Corporation. The chip has perfect protection circuit, including current limit and thermal shutdown circuit. The peripheral components form a high-efficiency voltage regulator circuit..
  • Features low-noise, high-performance and peripheral-simplified switching, the power adapter fully meets the six-level energy efficiency standard, meets national certification standards, and provides extremely comprehensive safety certification and excellent performance protection functions, including overcurrent protection overload protection and overheat protection, etc..
  • With a whole patent layout, it is safe and secure, simple and cool, easy to carry the effect of the power supply, which let you enjoy unimpeded music..
Check Stock

High Voltage DC-DC Boost Converter 1.5V-3V to 300V-400V 380V Adjustable Step-up Voltage Booster Power Supply Module

  • 3V DC boost power module, High-voltage sensors, Quiescent current 12mA, Size: 58x17x14mm/2.28x0.66x0.55inch.
  • Input voltage 3V, the output voltage adjustable range of 300V-400V (this circuit is not added voltage regulator circuit, the input voltage decreases the output voltage will drop)..
  • When the high voltage output is connected with a load, the on-board vibrator wiring terminal will have 3V voltage output (also can be connected in series with a LED and dozens of ohms resistanceas an indicator)..
Check Stock