Reviews 30km Without Optical Attenuation

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

...ed curve files to U disk, set storage path, etc.Built-in 8G TF card memory, can store a large amount of curve data..
✅【Network & Camera Test】WANLUTECH MT-8000 is not only an OTDR tester, but also a CCTV tester.It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of the splice, and failure location, etc. As well, built in camera tester for maintenance and installation of IP analog, HD coaxial cameras.It also comes with a digital cable tracer.Support searching for BNC cables, network cables and telephone cables from a mess of cables..

... assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
Optical Mode Type: OS2 (9/125 Singlemode) – 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, data services supported. ISO / IEC 24702.
Durable Construction, Commercial Grade | Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected delivery priority..

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

[MAIN PARAMETER]: LC/UPC Female to LC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

[MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..