Reviews 3 way Gas Valve

279834 Gas Valve Ignition Solenoid Coil Kit by Beaquicy - Replacement Part for Ken-more Whirlpool Samsung Estate Magic Chef Dryer - Replaces ap3094251

  • ✅ 【ULTRA DURABLE PRODUCT】: The 279834 Gas Valve Coil Set is suitable for dryers. The 279834 dryer valve ignition solenoid kit has a 3-terminal boost/hold coil and a 2-terminal secondary coil.This is a safety mechanism to ensure that there is no unsafe gas accumulation in your device. When the igniter reaches a sufficiently high temperature, these coils open the gas valve, allowing gas to enter the burner..
  • ✅ 【PRODUCT PACKAGE】:Includes 1 Pair x 279834 dryer gas valve ignition solenoid coil kit.279834 Gas Valve Ignition Solenoid Coil Kit includes two new gas coils. One coil is the primary coil and the other is the safety coil. No matter which component stops working, it should be replaced in pairs.Because both coils must be operable,then the valve can be opened,and the heating element will work normally.The kit can replace most new style gas coils..
  • ✅【365 DAYS WARRANTY】:279834 Gas Valve Coil Set supports 365 days return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

Little Giant CV-10 Check Valve for VCC, VCM, VCMA and VCL-14/24, 1/4\ FNPT x 3/8\ ID vinyl tubing - 89695

  • 1/4" BSP Female Full Ports One Way Air Check Valve..
  • Nickel-plated brass for durability. The brass valve core is wear-resistant, pressure-resistant and corrosion-resistant and has stable performance..
  • When installed and used, the tail of the arrow is connected to the gas input source, and the head of the arrow is connected to the output end..
  • This product is used in a gas medium, which can effectively prevent the gas backflow in the working pipeline caused by the reduction of the gas source, and avoid the reduction of the air pressure which will affect the normal operation of the instrument. Can be used in air pumps and air compressors..
  • Package Contents: 2Pcs x Air Check Valve..
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • VTEC Solenoid Spool Valve OEM Part Number: 15810-RKB-J01 15810RKBJ01. Replacement for 2005-2007 Acc-ord Hybrid, 2005-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effec....
Check Stock

Honeywell International VR8200A2132 Valve

  • Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check Stock

HUZTL Fuel Shut Off Valve Two-Way Replaces for 1-633347 Hustler 745059 Scag 482212 E633347 Zero Turn Lawn Mower ZTR Garden Tractor

  • ✅ Two Way cut off valve replaces for EXMARK 1-633347, HUSTLER 745059, SCAG 482-212.
  • ✅ 1/4" fuel shut off valve for Yazoo 102679 Rotary 11273 ZTR Mowers.
  • ✅ Dual tank switching valve replaces for Husqvarna Electrolux Jonsered 539102679 ZTR.
  • ✅ Gas Fuel Shut Off Valve 1/4" Barb Fittings, Two-Way, Dual Tank Configuration, On-OFF-On.
  • ✅ Package include: 1 shut off Valve,2 Fuel Filter, 4 Hose Clamps, 2 Fuel Tank Bushing Grommet.
Check Stock

BrassCraft PSC1083 K5 Safety Plus Gas Installation Kit for Range Furnace and Boiler

  • 5/8 In. OD x 48 in. length corrugated stainless-steel gas connector with ProCoat coating to withstand prolonged exposure to harsh household chemicals.
  • Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. MIP (with 1/2In. FIP tap) connection to gas supply or gas ball valve.
  • Includes multiple steel fittings to fit most gas appliance inlets: 1/2In. MIP (with 3/8In. FIP Tap) fitting & 3/4In. MIP (with 1/2In. FIP Tap) fitting.
  • Fits all current and most older five to six burner ranges, furnaces and boilers.
  • Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi certified.
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

  • 5-piece universal gas-appliance hook-up kit.
  • Comes with everything needed for installing most gas appliances.
  • Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
  • On/off valve provides easy servicing of appliances or summer shutdown.
  • Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters.
Check Stock