Reviews 3 phase Ac Ssr - BestBuyersPro.com

HiLetgo 2pcs SSR-40DA Solid State Relay Single Phase Semi-Conductor Relay Input 3-32V DC Output 24-380V AC

【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer..
【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller.
【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included.
【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading.
【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time.

Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.

Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.

ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

ATO 2 hp (1.5 kW) VFD, single phase 110V/120V input, 1 phase or 3 phase 220v-240v output, designed for driving single/three phase AC motor via 120v power supply.
【Voltage&Frequency】Input voltage: 1 phase 120V AC ±15%.
Output voltage: 1 phase or 3 phase 220V AC ±15%.
【APPLICATION】 ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】 Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】 If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

ATO 3 hp (2.2 kW) VFD, single phase 110v/120v input, single phase or three phase 220v output variable frequency drive, specially designed for 120v power supply.
【voltage&frequency】Input voltage : 1 phase 120V AC ±15%.
Output voltage: 1 phase or 3 phase 220V AC ±15%.
【APPLICATION】: ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】: If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

√ ● Dual display for Fahrenheit(F) and Celsius(C)，Range: -1999 to 9999 (depends on the input signal).
√ ● Input: Thermo Resistor: PT100, Cu50，Thermocouple: K,Wre3 ~ Wre25 ， Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC.
√ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m.
√ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V.
√ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet).

Specifications: This is solid state relay SSR-40VA..
Input Resistance/Power: 500Kohm/2W Output voltage: 24-380V AC.
Heat Sink Mounting Thread Diameter (Approx.) : 0.5cm / 0.19".
Heat Sink Total Size (Approx.) : 8 x 4.9 x 4.9cm / 3.1" x 1.9" x 1.9" (L * W * T ).
Package Content: 1 x SSR, 1 x heat sink, 1 x 470Kohm potentiometer ,1 x knob.