Reviews 3 Type Bearing

Aeromax 700c Road Comp Silver Road Bike Wheelset Clincher

  • Wheels come with rim strips and skewers, Serviceable Vuelta Ball Bearing hubs,.
  • Hand Built Every wheel is stressed 3 times, Every spoke is tension tested with a DT Swiss Gauge.
  • Type-Road Color: Silver Normal quick release skewered hubs 24 spoke aero double wall alloy rims, machined sidewalls satin finish Type: Clincher, tubed.
  • Bearing type: Ball/Cone3 Stainless Steel Black aero 3.0mm spokes Patented spoke pattern Drilled for Presta valve Rim Width: 20mm (outer width) Rim Width: 13.7mm (inner width) Rim Height: 29.3mm Spacing: front 100mm, rear 130mm Weight: Front 1020g / Rear 1190g.
Check Stock

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

  • 3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
  • Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
  • Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
  • Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Package Included: 1 x 3 Jaw Pilot Bearing Puller.
Check Stock

Detroit Axle - 2WD Only 6-Lug Front Wheel Bearing Hub Assembly for - 2WD Only 2000-2006 Silverado 1500, Sierra 1500, Yukon No Denali or Z71 - Driver Passenger

  • Front Wheel Bearing Hub Assembly 6-lug 2-pc Set For 2WD/RWD Models Only! This Front End Service Kit Contains A Front Left Wheel Hub, Front Right Wheel Hub, And Front Wheel Bearings To Complete A Wheel Bearing Hub Assembly Front Kit. This Wheel Hub Kit Is Also Known As A Front Wheel Assembly, Wheel Hubs Assembly, Front Assembly, Front Hub Bearing Assembly, Left Front Hub Assembly, Wheelbearing And Hub Assembly, Wheel Hub Assemblies, Wheel Hub Front, And A Front Hub Bearing Assembly Pair..
  • Hub Specification: Lugs:6 | Flange Type: 3-Bolt Triangular | ABS Type: Sensor Wire.
  • Replacement Hub And Wheel Bearing Assembly For 2WD Chevrolet Silverado 1500 1999 2000 2001 2002 2003 2004 2005 2006 2007. Chevy Suburban 1500 2000 2001 2002 2003 2004 2005 2006. Chevrolet Tahoe 2000 2001 2002 2003 2004 2005 2006. The Parts In This Kit Are Direct Replacements For Chevy Silverado Wheel Bearing, Silverado Front Wheel Bearing, Silverado Wheel Hub, Tahoe Hub Assembly, Chevy Tahoe Wheel Bearing, Wheel Hub Assembly Silverado, Suburban Wheel Bearing, And A Chevy Tahoe Hub Assembly..
  • Replacement Wheel Hub And Bearing Assembly Front For 2WD Cadillac Escalade Esv Ext 2002 2003 2004 2005 2006. Gmc Savana 2500 2003 2004 2005. Gmc Sierra 1500 1999 2000 2001 2002 2003 2....
Check Stock

Pillow Block Bearing, Bearing Steel hickened Mounted Self Aligning Rhombic Bearing3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, (2 Pack -UCFL204-12)

  • Cast iron UCFL204-12 flange block housing increases life of the bearing.
  • pillow block bearing 3/4 UC204-12 chrome steel bearing for efficient operations at a wide range of speeds.
  • pillow block bearing 3/4 inch shaft Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN.
  • pillow block bearing Set screw prevents shaft slippage.
  • Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4" Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F.
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

Dewalt DW718 / DWS780 / DW708 Miter Saw Replacement Ball Bearing (2 Pack) # N127530-2pk

  • Dewalt replacement ball bearing, part number N127530.
  • Compatible with: DW706 Type 1, DW708 Type 1, DW708 Type 3, DW708 Type 4, DW708-B2 Type 2, DW708-BR Type 2, DW716 Type 1, DW716 Type 2, DW716 Type 20, DW716 Type 3, DW716 Type 4, DW716XPS Type 20, DW717 Type 1, DW717 Type 2, DW717-AR Type 1, DW717-AR Type 2, DW717-B2 Type 2, DW718 Type 1, DW718 Type 2, DW718 Type 3, DW718-AR Type 1, DW718-AR Type 2, DW718-AR Type 3, DW718-AR Type 4, DW718-B2 Type 1, DW718-B2 Type 2, DW718-B2 Type 3, DW718-B2 Type 4, DWS709 Type 20, DWS779 Type 20, DWS780 Type 1,.
Check Stock

GLAMGLOW ThirstyMud hydrating treatment 0.1 Ounce 4 Pack

  • Torque oz/in (60V/74V): 133 / 161 Torque kg/cm (60V/74V): 96 / 116.
  • Size in": 165 x 083 x 157 Size in Millimeters: 418 x 210 x 400.
Check Stock

Hitec 31225S HS-225BB Mighty Mini Ball Bearing Servo

  • Bearing Type: Top Ball Bearing Speed (48V/60V): 014 / 011 sec at 60 deg.
  • Torque oz/in (48V/60V): 54 / 67 Torque kg/cm (48V/60V): 39 / 48.
  • Size in": 127 x 066 x 122 Size in Millimeters: 3226 x 1676 x 3100.
Check Stock

MAGICYOYO Complete Yoyo Bearing Pack, 10 Ball Golden Unresponsive Yoyo Bearing + Size C 8 Ball Yoyo Bearing + Narrow C Responsive Yoyo Bearing + Bearing Removal Tool + 6 Yoyo Strings + 6 Yoyo Axles

  • 【Package Include】2 X 10 Ball Golden Unresponsive Yoyo Bearing, 2 X U Type 8 Ball Unresponsive Yoyo Bearing , 2 X Narrow C Responsive Yoyo Bearing, 1 X Stainless Steel Bearing Removal Tool, 6 X 100%Polyester Yoyo Strings, 3 x Size M4*8 stainless Steel Yoyo Axles, 3 x Size M4*10 stainless Steel Yoyo Axles, 4 x Responsive Silicone Pad.
  • 【Unresponsive Yoyo Bearing】Size C 6.35mm*12.7mm*4.762mm, Fits for most MAGICYOYO unresponsive ball bearing yoyos, Such as Magic unresponsive yoyo seriesT5/T8/N5/N6/N9/N11/N12/M001/M002/Y01/K1/V3 /T9 ....
  • 【Responsive Yoyo Bearing】Size C 6.35mm*12.7mm*3.175mm, Fits for most responsive ball bearing yoyos, Such as Magic responsive yoyo series K1 / V6 / K7 / D2/ V3/ T9 ....
  • 【Bearing Remover Tool 】Length 68mm, outer diameter 6.35mm, easy to remove any size C bearing without harming or damaging your yoyo..
  • 【100% Polyester Yoyo String】About 113cm/44.4 inches long, can be adjusted the length by yourself. Yoyo string is made of 100% Polyester, very durable.(colors in random)..
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock