Reviews 2toyota Corolla Cv Axle

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

E-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer

  • 【Slide Hammer Puller Set with Plastic Suitcase】: This kit include: 1 heavy duty slide hammer.
  • 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry..
  • 【 Perfect Joint Fork】 ： This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • 【Slide Hammer Made of Heavy Steel】The slide hammer and the CV joint fork is made of heavy-duty steel, which can withstand huge pressure without deformation, is not easy to break, and is more durable. The sliding distance is 19.5 inches, and the weight is 10 pounds .The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • 【Quick to Remove CV Axle 】：With thi....
Check Stock

Flexx Boot FB3000 Small Shaft Universal CV Boot

  • Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function.
  • CV Drive Axle part numbers with an “HD” suffix are severe-duty applications and include a thermoplastic outboard boot for increased life and....
  • An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or....
  • CV Drive Axle measurements are validated after assembly to ensure a proper fit.
  • Threads are precision rolled to ensure proper fit when axle nut is....
  • Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....
Check Stock

Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints

  • Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
  • Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
  • Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
  • Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
  • 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments

  • Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts..
  • Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier..
  • Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most veh....
Check Stock

VCT 23" Long 5lb Slide Hammer Inner CV Joint Puller

  • The set includes a 23-inch T-style slide hammers bar, a 5 lb hammer weight, a nut, and a 2-inch opening 2.5-inch depth slide hammer CV axle adapter. They will remove the axle assembly without damage on 1986 to current Taurus and Sable..
  • The slide hammer and puller design provide a straight and even pull to protect joint off damage. The round bead on the puller will stop the hammer so it can never hurt the hand pulling on T-shaped handle..
  • Our CV joint puller adapter and large slide hammer bearing puller will create added torque to impose a large pressure on CV axle. This tool set could easily loosen and remove stubborn CV axles in minutes..
  • The product is made of premium steel, all the parts have hardened and finished with high-temperature oxide to ensure superior durability and rust and corrosion resistance..
Check Stock

CV Joint Boot Clamp Pliers - 22Pcs CV Boot Clamps Kit Auto Repair Tool Automotive Hose Axle Plier CV Clamp Tool for Most Cars

  • CV BOOT CLAMP PLIERS – With 2pcs CV joint boot clamps pliers car banding tools kit set for fast and simple tensioning and securing of CV boot banding strap. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 20PCS CV BOOT CLAMPS – 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It’s perfect for you to replace the car broken drive shaft CV boot clamp..
  • CV BOOT CLAMP TOOL KIT – We prepared 10Pcs small stainless steel cv boot clamps and 10Pcs large clamps for fixing cv boots. and 2pcs Auto Cv Joint Boot Clamps Pliers in this car banding tools kit, which is a perfect set for fast and simple tensioning and securing of CV boot banding strap..
  • EAR CLAMP PLIERS – Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp pliers fits most of cars..
  • CV JOINT BOOT – The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
Check Stock

Cardone 66-1009 New CV Constant Velocity Drive Axle Shaft

  • Proprietary Engineering Processes Ensure That All Cv Drive Axles Meet Oe Form, Fit And Function.
  • Neoprene Boots Are Designed With Additional Bellows, When Needed, To Resist Bellow Stress And Cracking, Which Is The Leading Cause Of Boot Failure.
  • An Axle Retaining Nut Is Supplied With Every Unit For A Hassle-Free Installation, Due To The Likelihood That The Original Retaining Nut Is Worn Or....
  • Cv Drive Axle Measurements Are Validated After Assembly To Ensure A Proper Fit.
  • Threads Are Precision Rolled To Ensure Proper Fit When Axle Nut Is....
Check Stock

NICHE High Strength Rear Left and Right CV Axle Kit for 2003-2008 Yamaha Grizzly 660 5KM-2530U-13-00

  • Includes Rear Left Axle, Rear Right Axle.
  • Rear-Left CV Axle Compatible with Yamaha 5KM-2530U-13-00, 5KM-2530W-12-00, Rear-Right CV Axle Compatible with Yamaha 5KM-2530T-13-00, 5KM-2530V-12-00.
  • Compatible with: Yamaha 2003-2008 Grizzly 660, 2005-2008 Grizzly 660 Hunter Edition, 2003 Grizzly 660 Metallic Titanium Limited Edition, 2003-2004, 2006 Grizzly 660 Hardwoods Hunter Edition, 2003-2005.
  • 25% Larger Joint and Shaft Diameters When Compared to Factory Specifications.
  • Durable Neoprene Boots Ultra-Low-Profile Boot Clamps Prevent Moisture or Water Damage.
Check Stock