Reviews 2hp Stroke Outboard Motor

Co-parts Recoil Pull Starter for 2 Stroke Outboard Motor 2hp 3.5hp Hangkai Boat Engine

  • Fits two-stroke outboard motor 2hp 3.5hp hangkai boat engine..
  • Package includes: 1 pull starter + 1 pawl.
Check Stock

CNCEST Outboard Boat Motor Engine Inflatable Boat Fishing Boat Engine Power for Sailboats Small Yachts

  • 【2 Stroke 3.5HP Outboard Motor】- VONZOER 2 Stroke 3.5HP Outboard Motor, superior engine with water cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, low noise, superior performance, environmental protection, durable and compact structure, forward design..
  • 【Wide Applications】- VONZOER outboard boat motor is great for inflatable boats, small yachts, fishing boats and sailboats or used as an auxiliary trolling motor. It is suitable for both saltwater and freshwater..
  • Full throttle perating range: 4000-5000r/min.
  • Recommended fuel: Regular unleaded gasoline.
  • 【Warm Note】- Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). Our outboard motor doesn't with gear oil, please prepare it by yourself.
Check Stock

6.5HP 4 Stroke Outboard Motor Heavy Duty Short Shaft Outboard Boat Engine Trolling Motor with Water Cooling CDI System for Inflatable Fishing Boat Kayak Canoe

  • 【6.5 HP 4 Stroke Outboard Motor】- The 6.5 hp 4-stroke outboard motor provides all the power you need for motoring in a small craft. This engine....
  • 【Note】- Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair it. To will avoid cylinder....
  • 【Wide Applications】- The outboard motor is great for small yachts, inflatable boats, sailboats and fishing boats or used as an auxiliary trolling....
  • 【Warm Tips】- 1. About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the....
  • 【Superior Performance】- 6.5 HP 4 Stroke Outboard Motor, superior engine water cooling CDI system to improve the reliability of the whole machine.....
Check Stock

YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat up to 25hp Auxilary Trolling Mount

  • Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs.
  • Specifications : Motor pad - 7.9"(20.1cm) wide, 6.3"(16cm) and 8.15"(20.7cm) two side length, 1.09"(4.3cm) thick, stainless nylock nuts (metric).
  • Applications : Fits most style of 2-stroke outboard motors.
  • Easy to install : 5 vertical running position lock bars.
  • locking the safety knobs to keep the bracket in place.
  • holds the outboard motor up or lowers....
  • Note : please be careful of the sharp edge when you install.
  • Please feel free to contact us if you have any question about the product. We would try....
Check Stock

TFCFL 6HP 2-Stroke Electric Outboard Motor,Heavy Duty Outboard Motor Boat Engine Water Cooling CDI System, Tiller Control, Inflatable Fishing Boat Engine,Short Shaft 40cm,4.4KW

  • 【High Performance Motor】 The outboard boat motor using 6 HP 4 stroke strong power high quality with friendly price.Max. Output: 6.0HP.
  • 【Air Cooling CDI System】This outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting..
  • 【Durable and Safety】Vertically installed engine design can improve power, performance and durability, high-quality carbonation system with ignition bulb can improve efficiency, twisting the throttle handle and engine stop button to improve Responsive, excellent outboard anti-corrosion system and anodes to improve durability.
  • 【6HP 4 Stroke Outboard Boat Motor】Air cooling technology To improve the reliability of the whole machine. Convenient use and easy operation, travel safer, more reliable, more corrosion resistant, more beautiful, more durable, more energy efficient, more environmentally frien....
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check Stock

CLIENSY 4HP 4 Stroke Outboard Motor Boat Engine Heavy Duty 52CC Boat Motor with Air Cooling CDI System

  • 【High Performance Motor】: The outboard boat motor using 4.0 HP 4 Stroke strong power high quality with friendly price.
  • 【Air Cooling CDI System】: This outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day....
  • 【Convenience to Use】: Features 360 degree steering rotation for reverse without gear shifting..
  • 【Durable and Safety】: Comparable lubricating system for 4stroke outboard engine maneuverable and safe twist grip throttle control..
  • 【Widely Applications】: Our boat motor can be marched with inflatable boats, rubber boats or fishing boats..
Check Stock

Minn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft

  • ♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
  • Recommended Lubricant: 2 Stroke Lubricating oil.
  • ♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
  • Recommended Propeller range: 3 -9"1/4''x8".
  • ♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..
Check Stock

TFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW

  • 【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
  • Packing size:133x71x38.5cm/52.3''x27.9''x15''.
  • 【Main Parameters】Control System: #93 gasoline.
  • Recommended Propeller range: 3 -9"1/4''x8".
  • Recommended Lubricant: 2 Stroke Lubricating oil.
  • 【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
  • Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
  • After use, the fuel in the carburetor must be completely discharged..
  • 【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....
Check Stock