Reviews 2gmc Duramax Injectors

kweiny Diesel Common Rail 18mm Fuel Injector Cap Block Off Tool

Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
Compatibility: Fit with 2006-2011 6.6L Chevy/GMC Duramax (LBZ & LMM) and for Dodge/Cummins 2007-2017 6.7L, Renault engine system, and other vehicles with a 18mm fuel line nut.
Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
Specification: M18x1.5mm internal thread nut.
Material: Carbon tool steel, surface antirust..

Main Usage: Identification of faulty diesel fuel injectors and diagnosis of engine cylinder knocking sounds.
Compatibility: Fit with 2001-2005 6.6L Chevy/GMC Duramax and for Dodge/Cummins 2003-2007 5.9L, for Bosch diesel common rail system, and other vehicles with a 14mm fuel line nut.
Working principle: Block the fuel supply to the detected cylinder, and sealed diesel common rail pipe. Make the detected cylinder temporarily stop working.
Specification: M14x1.5mm internal thread nut.
Material: Carbon tool steel, surface antirust..

Compatibility: For 2001-05 Chevy GMC Duramax 6.6L (LB7 & LLY) and 2003-07 Dodge Cummins 5.9L, for Bosch diesel common rail system and other vehicles with a 14mm fuel line nut..
This diesel fuel injector block-off cap tool can helps in identification of faulty diesel fuel injectors and also used to diagnose engine knock sounds..
Full carbon steel construction, surface antirust finished.
Specifications: M14x1.5(14mm) internal thread nuts.
Replace Parts number: Miller 9011 / GM EN-47589-1.

Replacement Fuel Filter With Head & Sensor - The fuel filter screens out dirt, rust, particles and most importantly, water from the fuel before entering the system of the vehicle. Undesired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse if contaminated with water will cause them to fail. These filters needs to be changed regularly to maintain desirable performance and efficient fuel economy..
Compatible Replacement for Chevrolet & GMC Trucks With 6.6L Duramax Engines - 2004 - 2012 Silverado 2500 HD | 2007 Silverado 2500 HD Classic | 2004 - 2006 Silverado 3500 | 2007 Silverado 3500 Classic | 2007 - 2012 Silverado 3500 HD | 2004 - 2012 Sierra 2500 HD | 2007 Sierra 2500 HD Classic | 2004 - 2006 Sierra 3500 | 2007 Sierra 3500 Classic | 2007 - 2012 Sierra 3500 HD |..
Replaces Part# 12642623, 12639448, TP3018, 904-517, 904517 commonly found on the popular 6.6L Duramax Silverado and Sierra trucks including year models 04, 05, 06, 07, 08, 09, 10, 11, 12. The fuel filter can easily be located on the passenger side of the truck beside the engine. It includes the head with primer pump and bleeder screw, a new fuel filter water separator and the water in fuel sensor..
OEM Fit, Quality, Finish - While this is NOT a g....

REPLACEMENT BATERY E4210, DuraMax E4210, E4277, DuraCore E4210, E4225, DuraMax E4277, DuraMax E4225, DuraPro E4277, DuraXT, DuraCore, DuraMax, DuraMax....

Brighten up your driving experience with this simple upgrade inside your fuse box. Simply install the lighting system control module for vehicles to allow your high-beams, low-beams and fog lamps to simultaneously illuminate the road ahead..
Once installed the lighting system control module for vehicles will turn on the high-beams, low beams and fog lamps when you turn on your high-beams. When the high-beams are NOT turned on your low-beams and fog lights will function normally..
Perfect to see better at night, installation in just 1 minute job and make all you lights turn on. Suitable for use in dark suburban roads, foggy weather, heavy rain and other harsh environments..
Application: 2003 – 2007 GM Classic Full Size Truck platforms including – Silverado 1500/2500/3500, sierra 1500/2500/3500. 2003 – 2006 GM Classic Full Size SUV platforms including – Avalanche/Suburban/Tahoe..
Applicable to: 2003 GM Silverado/Sierra 2500/3500 6.6L LB7 Duramax. 2004 GM Silverado/Sierra 2500/3500 6.6L LB7 Duramax. 2004.5 GM Silverado/Sierra 2500/3500 6.6L LLY Duramax. 2005 GM Silverado/Sierra 2500/3500 6.6L LLY Duramax. 2006 GM Silverado/Sierra 2500/3500 6.6L LLY/LBZ Duramax. 2007 GM Silverado/Sierra 2500/3500 6.6L LLY/LBZ Duramax (classic body style)..

Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..

Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..

Fits all 6.2L / 6.5L Injectors, 1982 to present.
Replaces Kent-Moore KM J-29873, 30mm / 3/8 Drive.
Compact design makes chaninging injectors much easier!.
Allows passenger side injectors to be changed on turbo engines without removing turbo.