Reviews 29er Front Wheel Disc

YAKIMA - HoldUp Hitch Mounted Bike Rack, 2'

  • ADVENTURE READY: Load your bike in seconds whether it's a 20-inch wheel or a 29er.
  • StrongArm design secures bike at wheels, protecting paint and carbon frames.
  • SMART DESIGN: Tilts down with bikes loaded so you can access the back of your vehicle.
  • Accommodates disc brakes, thru-axles and full suspension bikes.
  • UNRIVALED SPACING: Carries 2 bikes out of the box, or 4 bikes with optional HoldUp +2. 1-1/4" or 2" Hitch Receiver.
  • Side-to-side adjustability to adjust space between bikes.
  • EASY INSTALL: SKS Locks included for added security.
  • +2. 1-¼-inch or 2-inch Hitch Receiver required.
  • WE’VE GOT YOUR BACK GUARANTEE: Covered by our Limited Lifetime Warranty.
Check Stock

KiloTTTrackfork 1 Inch Track Bike Road Fork Steel Threadless Steer Tube Uncut in Chrome

  • UD Black or 3K 29er 26er carbon MTB fork rigid mountain bike fork 29"inch.
  • Weave 3K/UD black, glossy/matte finishing.
  • Color: can be customized, contact us to see and pay extra cost..
Check Stock

CyclingDeal Compatible with WTB KOM i25 Mountain Bike Novatec Boost Hubs Ikon TR Skinwall Tires Wheelset 11s 29'

  • Rim: WTB KOM LIGHT i25 Disc Brake only Black Tubeless Compatible System. Wheel Size: 29". Inner Width: 25 mm. Spokes: 32 Stainless Steel.
  • Type: Disc 6 bolts. Material: Alloy. Front Hubs: Novatec Boost Hub D791SB-B15, 32H x 14G, weight 153g, Alloy Disc J-Hook, 2 Sealed bearing, M15 x 110mm, P.C.D 58mm, Offset 7.2mm.
  • Rear Hub: Novatec Boost Hub D462SB-SL-B12, 32H x 14G, weight 330g, Alloy Disc J-Hook, 4 Sealed bearing, M12 x 148mm, P.C.D 58mm, Offset 7.5mm, 5 Pawls, 9 10 11 Speed compatible. Tire: IKON Foldable Skinwall 29" x 2.2.
  • Ikon TR Skinwall: Tyre TPI: 60. Tyre PSI: 35-60. Inner Tube: FV48 Tubes.
  • Weight: 3720g/set = 8.2ibs0 Package: Front and Rear Wheels with Tyres, Tubes, and Hubs. Warranty: One Year.
Check Stock

Aluminum Alloy Mountain Wheels 26/27.5/29 Inch Double Wall Cycling Rim Disc Brake MTB Wheelet for 7/8/9/10/11 Speed Blue (Size : 29 INCH)

  • VERSION : 26/27.5/29 Inch Double wall Aluminum alloy Mountain Bike Wheelset.
  • WHEEL HUB : Front 2 back 5 bearing, Quick release wheel, front hubs 100mm, rear hub 135mm.
  • SPOKE : 45# round stainless steel, 32H front and back, can withstand 420 lb pulling force.
  • BRAKE METHOD : International standard 6-nail disc brake, front wheel 960g, rear wheel 1075g.
  • BE APPLICABLE : for Shimano & Sram 7/8/9/10/11 flywheel, Tire size 1.25 ~2.25 inch.
Check Stock

Corki Cycles Dual Disc Brake Mountain Bike Wheelset 26 x1.5-2.6 Inch Aluminum Alloy Wheelset with 32H Rims - Fits 8 9 10 11 Speed Cassettes - Comes with Front and Rear Skewers - Black

  • - There is nothing quite like riding and hearing the beautiful sound of your rear hub spinning away. That clicking sound is magical and a sign of a high-quality wheelset. The Corki Cycles dual disc mountain bike wheels are built to give you a greater riding experience. Our front and rear wheel hubs are designed with 2 bearings for smoother riding as well as ensuring a sealed wheel structure..
  • - The Corki Cycles bike wheels are a strong and durable all-round mountain bike wheelset. Built with 32H Aluminum alloy rims, Aluminum 6061 hubs, stainless steel spokes, and brass nipples. We utilized 3 materials to optimize strength, yet also ensure a lightweight pair of MTB wheels. Ride on all terrains, from the gnarliest rock gardens to the local trails. Enjoy a reliable and long-lasting wheelset..
  • - Our wheelset comes in 3 sizes: 26", 27.5", and 29". Choose the wheelset size to match your mountain bike. Attach both your front and rear wheel disc brake rotors onto the wheels with the universal 6-bolt hub connection. The rear wheel hub is compatible with Shimano and Sram 8, 9, 10, and 11-speed cassette gear sets..
Check Stock

Topeak Defender Xc11-29Er-Rear (Black, 25.6x4.3x3.9-Inch)

  • For 29" Wheel The XC11-29er is a lightweight removable rear fender designed for exceptional mud/spray protection and built specifically for 29er mountain bikes..
  • Multiple pivots allow for easy fender angle adjustment while the quick release clamp adjusts to fit ø25.4 - ø34.9 mm seat posts.
  • Advanced high impact plastic is co-molded to a flexible trailing edge for resistance to impacts while the highly polished underside of the fenders prevents dirt buildup in extreme muddy conditions..
  • Fits MTB 29” tires up to 29” x 2.5”.
  • ATTACHMENT - QR slip joint clamp fits ø25.4 - ø34.9 mm seat posts.
  • MATERIAL - Two tone injected high impact resistant plastic.
  • ADDED FEATURES - Highly polished underside.
  • SIZE - 67 x 10.2 x 7.5 cm / 26.4” x 4” x 3”.
Check Stock

CDHPOWER 29'/700C Black Aluminum Mag Wheels - 66cc/80CC Gas Motorized Bicycle

  • Please note£ºexcluding bolts, size of Bolts to mag wheel:M5x23mm, if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles.
  • do not need adapter, sprocket only needed.
  • put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding£»inner diameter of rim:17.5mm/0.689inch.
  • Aluminum Wheels Excluding chain drive Sprocket£»Thread size: 1.375 inch X24T.
  • the hole spacing for front and rear wheel both 44mm, please see the last picture£»NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned..
  • Size for Wheel Axle: LxT(front axle): 160mm x 10mm.
  • light and very durable. 29"/700c Size Wheel.
  • the hole spacing for front disc brakes of mag wheel to be added is 44mm.
  • PLEASE NOTE 1: the best safe speed if racing: 35km/h£»Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel, buyer need drill 6 holes in middle to make sprocket fit on the alum wheel or buyer buy CDH multifunctional sprocket which fits well on CDH alum wheel.
Check Stock

Mountain Bike Disk Brake Set G3/ HS1 Bicycle Disc Brake Kit Front and Rear 160mm Caliper Rotor with Bolts and Cable (HS1 A Disc Brake Set)

  • F160R140mm--front clipers,means choosing the 160mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 140mm rotor.
  • F180R160mm--front clipers,means choosing the 180mm rotors if you want to intall the clipers at the front wheel,and for rear wheel you have to choose the 160mm rotor.
  • It is general for mountain bikes and electric bicycle?Front and Back - 160mm rotor diameter..
  • Center 6 bolt pattern diameter on rotor is 44mm..
  • Disc brake Rotor, disc brake caliper and to make the disc brake pads can not be stained with oil, change the disc brake caliper or to make the disc brake pad before the rotors to avoid oil on the disc brake disc will affect the brake effect, you can use alcohol to clean the disc brake rotors..
Check Stock

MEEPO 105MM Donut HUB Motor KIT, FIt for Shuffle (V4) , Mini 2 and Other Earlier Versions

  • Upgrade Your V4, V4 ER, MINI2,MINI2 ER, V3 V3 ER, V2, Nls pro With The Meepo 105mm Donut Wheel Set..
  • Excellent shock absorption, providing a comfortable ride and stable riding experience..
  • Include: front wheel *2,Motor (with sleeves)*2,truck*1.
  • Delivered in roughly 30 business days after payment.
Check Stock

SKSAE B42 Commuter 2 Bicycle Fender Set (Black, Fits Tire Sizes 700 x 25), (10106)

  • FULL LENGTH PROTECTION: Commuters can stay dry and clean from continuous spray of dirt and water during rainy day or wet weather rides. Traditional full fender design covers most of the front and rear wheels to keep the rider as well as other fellow group riders or walkers on the road dry. Riders can look forward to extended bike life from keeping most of the unwanted dirt and water away as much as possible. Bikers will enjoy seeing their cleaning and maintenance bills coming down..
  • LIGHTWEIGHT, YET STURDY: Bluemel stiff and sturdy fenders use a sandwich design of extra fine aluminium strips inside a plastic housing. The superior light-weight design does not add too much to a bike’s weight, keeping it low profile and least invasive to rider performance. Ultra-light design has very minimal adverse effect on drag and biking speed..
  • SAFE & DURABLE: Bluemels come with ASR system for extra protection, where in the struts are released in case the front wheel is jammed by the mudguard. After proper installation, the stainless-steel stays keep the fender snug in place, avoiding chances of slipping. These durable mudguards are resistant to varying outdoor weather effects, like corrosion or UV exposure..
  • ATTRACTIVE GERMAN DESIGN: Low profile design will lo....
Check Stock