Reviews 25 Kw Mono Phase

RATTMMOTOR 110V Water Cooled Spindle Motor Kit 2.2KW ER20 Spindle Motor φ80mm 24000RPM+2.2KW VFD 110V Inverter Variable Frequency Drive+80mm Spindle Mount+80W Water Pump for CNC Router Milling Machine

  • 【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 110V 0-50Hz/60Hz. Output：3 phase 110V 0-400Hz.Under normal....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
  • 【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

4KW 220V VFD Inverter Variable Frequency Drive Converter Driver Controller 5HP 3-Phase Output 18A VSD with 2m Extension Cable For Spindle Motor Drive Control/CNC Router Engraving Milling Machine

  • Input voltage:single phase or three phase 220V 60Hz.
  • Cable:parcel include 2m extension cable/control panel box.
  • Output Current:18A；this VFD can not install brake resistor..
Check Stock

RATTMMOTOR CNC 2.2KW Air Cooled Spindle Motor Kit 220V Spindle Motor ER20 80mm 24000RPM+2.2KW VFD Drive 220V Inverter Variable Frequency Drive Converter+80mm Mount Clamp Bracket for CNC Router Machine

  • 【Package Include】: 1 x 2.2KW 220V Air Cooled Spindle Motor + 1 x 2.2KW VFD Inverter 220V + 1 x 80mm Spindle Motor Mount(with 3pcs screws).
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW air-cooled 8A Φ 80x195mm spindle motor come with a ER20 nut and collet. Frequency is 400HZ, 0.005....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
Check Stock

RATTMMOTOR CNC Spindle Motor Kit 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 220V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router

  • 【Package Include】: ①1 x 2.2KW 220V Water Cooled Spindle Motor ②1 x 2.2KW VFD 220V ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W....
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【Multi-Protection Functions of VFD】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection,....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

CNC Spindle Motor Kits Square 110V 1.5KW Air Cooled Spindle Motor 1.5KW VDF 2.75Inch bruches 40Inch Electric Wire,13 pcs ER11 Collets for CNC Router Engraving Milling Machine

  • ✅Technical Parameters: Spec: Φ3.13-9.4inin (Diameter: 5.4cm x Length: 23.9cm).
  • ✅Air Cooled Spindle: High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature,....
  • ✅Package include: Square Spindle Motor, Inverter, ER11 Collet.
  • Drill Bits, electric wire. Our air cooled spindle is widely engrave for wood,....
  • ✅Support: We offer 1 year warranty. If you get stuck, contact us with any questions that arise, our customer service team are waiting for helping....
Check Stock

Quantum Audio QPX2000.1M 2000W Max Class-D MonoBlock Car Subwoofer Amplifier Amp w/Remote Bass Control

  • Signal to Noise ratio >90dB | Variable Subsonic Filter 15Hz – 55Hz | Low Pass Crossover: 25Hz-250Hz.
  • Bass Boost @ 45Hz: 0-12db | Phase Shift Control: 0-180 degree | Frequency Response 10Hz – 220Hz.
Check Stock

Electric 50 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

  • Cylinder Max Pressure 25MPA,TONNAGE: 502 KN.
  • Worktable Size: 13-1/2" x 30-1/2" x 1-1/8".
  • Overall dimension: 50" x 20" x 66-1/2" (crate: 59" x26" x 78") *estimate only*.
  • Weight G.W. / N.W. : 1,529 lbs / 1,372 lbs *estimate only*.
Check Stock

Toastmaster 1122 Chopster

  • Temperatures from 140-450 degrees F w/ snap-action thermostatic controls that operate precisely as the temperature is adjusted..
  • 12-Inch sections are controlled individually on a 3/4" thick polished steel plate designed for high-volume usage..
  • Bullnose front design protects operator from hot components and includes a 3-1/4" wide grease trough to easily remove liquids from the griddle to the drawer and into waste..
  • 4-Inch adjustable legs for stabilizing on uneven surfaces.
  • 48" wide x 21" deep cooking surface, NSF.
  • 1-Year Parts & Labor Warranty for Commercial use.
  • 12/16kW, 208/240v, 1 or 3-Phase, Field Convertible.
Check Stock

PRINCE CASTLE Drive Motor Assembly 87-028AS

  • ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
  • 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
  • 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
  • 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

Extech 382075 True RMS 2000A AC/DC 3-Phase Clamp-on Power Analyzer

  • Measures, computes, and displays 3-Phase power on balanced or unbalanced loads.
  • Display Lead/Lag current/voltage phase shift in Degrees.
  • Dual displays: kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz.
Check Stock