Reviews 22mm Port Zone Valve
Patioer R134A Refrigerant Charging Hose Gauge, Refrigerant Recharge Hose Kit with 3 Pack BPV-31 Bullet Piercing Tap Valve Kit for Car AC Air Conditioning Refrigerant Charging Can to R-12/R-22 Port
- PACKAGE INCLUDES 5 PACKS: 3 x BPV-31 bullet piercing tap valve kits, each one contains 1 piercing valve, 1 hex key and 2 adapters.
- 1x R134A U-charge hose with gauge and can tap.
- PREMIUM MATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use..
- R134A CHARGING HOSE: 15.3inch/39cm long, with R-134a can connect R-12 / R-22 service port, 1/2" end port fits for R12, R22, R502 fittings. And the gauge has scale readings for R134, R12, and R22. 90-degree push and lock coupler can auto shut off..
- EASY TO INSTALL: BPV-31 bullet piercing tap valve kits are equipped with hexagonal wrench of suitable size, which is more convenient to install. Use the retrofit valve to attach the gauge with bullet piercing tap valve..
- UNIVERSAL RETROFIT VALVE: Retrofit valve converts from R-12 to R-134a. Fit for 7/16 inch low side port.
- Suit for vehicles pre-1994, comes with R-134a refill fittings. Replace AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
Check StockR12 to R134 A High/Low AC Fitting Port Retrofit Conversion Adapter, Quick Coupler Valve A/C 90° Fitting, High and Low Side R-12 to R-134A Retrofit with 2PC Caps
- ♥ WIDE COMPATIBILITY - Charging port adapter R12 R22 Port to accept R134a Quick Disconnect. These Low/High side retrofits/adapters/fittings will convert your old 1/4" SAE or 7/16’’- 20UNF R12 R22 charging port and make it accept the R134a quick disconnect hose..
- ♥ PREMIUM QUALITY - With solid copper material, resistant to corrosion & good extensibility..
- ♥ EASY INSTALLATION: The low AC fitting conversion adapter with time-saving and effort-saving while installing, lightweight, shortcut..
- ♥ DIMENSION - Low Side, 1/4"SAE (7/16''- 20) x 13 mm, blue. High Side, 1/4" SAE (7/16’’- 20) x 16 mm, red..
- ♥ WARRANTY - This can tap comes complete with a lifetime warranty. If the dispensing valve fails, simply contact us for a replacement or full refund..
Check StockMudder Bpv31 Piercing Valve 134a Kit R134a Refrigerant Charge Hose with Gauge, Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/r22 Port Ac 1/2 and Universal Retrofit Valve with Dust Cap
- Package content: 3 packs BPV-31 piercing tap valve kits (each kit contains 1 piercing valve, 1 hex key and 2 adapters), including R134a U-charge hose with gauge and can tap, universal retrofit valve with a dust cap, 5 packs in total, bring you more convenient for replacement.
- All our replacement kits are made of corrosion-resistant metal that won’t wear out or rust over time, with anti-leaking design that will be safer for you.
- Easy to install: our BPV-31 piercing tap valve kits come in compact design that only requires a 2-inch clearance area for installation and use, and you only need 1 hex key wrench (included) to install the kit.
- If you want to attach the gauge with BPV piercing tap valve, you need a retrofit valve (included).
- R134a Charging hose: 19 inch hose with R-134a can to R-12/R-22 service port connection, 1/2 inch end fits R12, 22, 502 fittings.
- And the gauge has scale readings for R134, R12, and 22. 90-degree push and lock coupler with auto shut off.
- Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
- Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
- Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch ....
Check StockBPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port
- BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
- R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
- BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
- 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
- The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
- Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
Check StockValve Core Removal HVAC Tool, AC Schrader Valve Removal Tool with Dual Size SAE 1/4 & 5/16 Port, R410 R32 Brass Adapter Air Conditioning Line Repair Tools for Refrigeration
- 【Durable Material】--- The valve core remover installer tool is made of premium brass, superior resistance to chemical corrosion and high pressures. The sealing O-ring on the brass nut makes it have better sealing performance for anti-rust, durable and safety. Having longer life to use than ordinary valve cores. Perfect christmas gifts for men women..
- 【Schrader Valve Tool Feature】--- The metal knob with non-slip knurled design for easy and safe operation.
- AC valve core removal tool has a ball valve that can be opened and closed in just a quarter-turn. Core grabber tool built-in magnet at part of bottom base, easy to use..
- 【Easy to Install】---This ac valve core removal tool can be easily inserted into the inner valve core for removal or installation without stopping the machine or releasing the refrigerant. Built-in disconnect valve for easy and quick operation, without wasteful refrigerant leakage..
- 【Wild Application】--- SAE standard Valve Core Tool suitable for most air conditioner refrigeration equipment, dual size( SAE 1/4'' & 5/16'' Port ). SAE 1/4'' Port suitable fo....
Check StockKazeffi Synchron Motor 24V 4RPM Replacement for Honeywell Motor 802360JA,Used in V8043/8044 Zone Valve Control
- 【Higher Performance】:802360JA Zone Valve motor Adapt to Honeywell zone valve motor V8043/V8044 . This Zone Valve Motor 24V, 4rpm at 50/60HZ. Cable....
- 【Save time and money】:This Replacement motor for v8043 zone valves motor Easy to install. No need to replace brand new actuators or other HVAC....
- 【High Quality】:Quality tested for over 100K cycles for flawless operation,Metal gears can be perfectly compatible with Honeywell V8043 or V8044....
- 【More Applicable Scenarios】:802360JA can be replaced: HVAC damper control motor, Actuator Zone Valve motor etc. After many professional debugging,....
- 【After-sale service】:100% after-sale guarantee, if you have any dissatisfaction with the product, you can ask for a replacement or a full refund.....
Check StockT6 Valve Core Remover/Installer with Dual Size SAE 1/4 & 5/16 Port Air Conditioning Line Repair Tools for HVAC R32 R410A
- EASY INSTALLATION:Replace Leaking Valve Cores Quickly and Easily,remove and Install Valve Cores Without the Loss of Refrigerant..
- WORK WITH:Valve core remover installer changer R22, R410a refrigeration air condition services.
- CONNECTION:Install tool can adapt to R22/R134/R410/R32 air-condition, external bypass port design can remover valve cores. Works great for both Mini split systems as well as 1/4" service valves on split systems..
- MAIN FEATURES: Ball value handle, metal schrader cap, schrader’s core grabber tool, built-in magnet at the bottom base..
- PACKAGE INCLUDES: One 1/4" & 5/16" SAE Valve Core remover and install tool..
Check StockKOOTANS 1 Pair Service Emergency Gladhands with Valve Switch Die Cast Aluminum Valve Glad Hands Universal Air Hose Brake Coupling Connector Handshake Kit for Truck Semi Trailer Tractor RVs
- For the Glad Hands with Valve, the valve is available to control opening and closing. The red valve can be connected with an air blow gun..
- Kit Contains: 1 pair Gladhands with Valve(Red + Blue) + 1 pair Brass Fittings. Color coded red & blue Gladhand for ease of emergency and service line identification..
- Glad Hands Port Size: 3/8'' FPT, 3/4'' MPT or 1/2'' FPT(The connector at the port can be removed as required). Red Side Port: 1/4'' FPT, air blow gun can be connected, so NO PLUG for the hole.
- Brass Fitting: one port: 3/8'' MPT. Another port can connect 6mm air hose..
- Handshake Kit was constructed of die cast aluminum with stainless steel wear plates. Service and Emergency configurations (polarized) or Universal (non-polarized). Meets SAE J318 requirements. We offer an 1-year after-sales service for this product. Any problems, please contact us..
Check StockAupoko R12 R22 to R134A Conversion Adapter Kit, R12 to R134A Retrofit Valve Fitting Kit for A/C Pro Refrigerant - 2 Kits
- WIDE COMPATIBLITY – Completely used to replace R12 with R134A charging port adapter, perfect air conditioning conversion adapter kit..
- PREMIUM QUALITY – Made of stainless steel and plastic, solid construction for high heat resistance, durability and safety..
- EASY INSTALLATION – Connected to the thread for use with the valve, there is a gas valve inside, fitted with a plastic protective cover, easy and fast installation..
- NOTE – These Low/High side retrofits/adapters/fittings will convert your old 1/4″ SAE R12 R22 charging port and make it accept the R134a quick disconnect hose..
- 1 YEAR WARRANTY – Order R12 R22 Port to accept R134a quick disconnect from Aupoko, we offer 12 months warranty, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..
Check StockR134a Refrigerant Recharge Hose Kit-A/C Freon Charging Hose Set, with BPV-31 Bullet Piercing Tap Valve, AC Retrofit Valve, R134a Self Sealing Adapter, for Home/Car A/C Refrigerant System
- 【R134a Freon Recharge Kit】The ac refrigerant recharge hose kit includes: 1pcs R134a refrigerant charging hose with scale guage readings for R134/R12/R22 types freon, 1pcs RH thread R134a self sealing adapter, 1pcs ac retrofit valve, 1pcs bpv-31 bullet piercing tap valve.
- 【RH R134a Self Sealing Adapter】The ac refrigerant charging hose can be achieved to connect self sealing refrigerant cans through this RH thread r134a self sealing can tap.
- 【R134a Refrigerant Charge Hose with Guage】The ac freon charging hose equiped with the scale guage reading for r134/r12/r22 types freon, piercing r134a can tap to connect puncture r134a refrigerant cans male mouth, r134a service quick coupler port to connect car ac r134a service male port. Directly used for car r134a ac refrigerant system.
- 【AC Retrofit Valve】The r134a refrigerant charge hose also can be used for home refrigerator ac refrigerant system through equiped with this ac retrofit valve. 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
- 【Widely Compitable】The r134A ac refrigerant charge hose kit can....
Check Stock