Reviews 20mm Id Hose

Autobahn88 Engine Room Silicone Vacuum Hose Dress Up DIY Kit, compatible with All Models of Toyota (Blue)

  • Compatible with: all models of Toyota and all other vehicle makes and models.
  • Kit includes: 3 Pieces of Silicone Vacuum Hose : ID 0.12" (3mm) x 10FT (3Meter) + ID 0.16" (4mm) x 6FT (2Meter) + ID 0.31" (8mm) x 3FT (1Meter).
  • Also includes: Zip Tie 30pcs + Spring Clamp Kit + Plastic T-Joiner 3pcs.
  • Application: Boost Hose, Radiator Tank, Gauge Vacuum Hose, etc.
Check Stock

ISPINNER 2 Pack 2 Inch Stainless Steel T-Bolt Hose Clamps, Clamp Range 56-64mm for 2\ Hose ID, Pack of 2

  • RANGE - 2.20" - 2.52" same as 56-64mm for 2" Hose Inside Diameter.
  • APPLICATION - T-bolt clamps provide leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment..
  • ATTENTION - Used for 2" ID hose, better to check your Hose OD to fit the working range before purchasing. For some extreme thin or thick hose, please consider appropriate clamp size..
Check Stock

Autobahn88 Silicone Vacuum Hose Dress Up DIY Kit, Universal Fit All Nissan,Subaru,MMC, Toyota,Honda,Mazda, Mustang,Chevrolet,Ford, Suzuki,Citroen,Audi,BMW, Benz,Mini,Volkswagen,Fiat, etc (Red)

  • Universal fit to all vehicle makes and models.
  • Kit includes: 3 Pieces of Silicone Vacuum Hose : ID 0.12″ (3mm) x 10FT (3Meter) + ID 0.16″ (4mm) x 6FT (2Meter) + ID 0.31″ (8mm) x 3FT (1Meter).
  • Also includes: Zip Tie 30pcs + Spring Clamp Kit + Plastic T-Joiner 3pcs.
  • Application: Boost Hose, Radiator Tank, Gauge Vacuum Hose, etc.
Check Stock

HIBLOW HP-200 Pond Aerator/ Septic Linear Air Pump

  • Premium quality and longevity. Quiet, energy efficient, oil/ lubrication free, outdoor UL rated.
  • Aeration for ponds up to 2 acres at 10' or less in depth. Helps keep water clean and clear. Promotes healthy oxygen levels for fish to thrive and grow. Circulates water - evenly distributing oxygen and water temperature..
  • Can be rebuilt 2 times for the fraction of the cost of a new aerator. See HIBLOW's website - support page for a video tutorial.
  • Hose connector included: 5/8" ID to 1" ID Straight Stepped Hose with clamp. Barb fitting size 1" OD (barb not included).
  • Aeration tubing recommendations: Distances between 50-100' use 1/2" ID tubing. 100'+ use 3/4" ID tubing.
  • Use a medium bubble diffuser (3mm-5mm) for best results and aerator life.
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

Whatman 6721-5010 Polydisc TF PTFE In-line Filter 1.0 Micron, 13 psi Maximum Pressure, 900 Flow Rate (Pack of 10)

  • Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
  • Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
  • hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
  • Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
  • Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
  • Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.
Check Stock

LabEdit Portable Vacuum Pressure Pump with Tubing and Connectors

  • ...use this product in other country, please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
  • There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. The three different size hoses are one piece 4mm ID x 5mm OD hose.
  • one unit 6mm ID x 9mm OD. These three type hose could fit most of different size filter bottle nozzle..
  • The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
  • The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the product is working..
Check Stock

Generator Fuel Line Kit 3/16 for Small Engine Champion Honda Predator Coleman Generac Mini Bike w/Clamps

  • OEM standard generator fuel tube kit. Comes with 20 clamps for fixing the fuel hose which connects carb gas inlet and gas tank outlet. The protecting hose(supporter) is for the fuel hose to less abrasion..
  • 39 inch in length. Oil resistant, high temperature and cold resistant from -22F to 338F..
  • Fits Honda GX120 GX160 GX240 GX270 GX340 GX390 small engines and generators powered by them..
  • Fits Honda Clone generators, Generac Harbor Freight Predator Champion Coleman Powermate ETQ Duromax Centurion Wen Westinghouse Firman Powerhorse Powermate Blackmax Durostar Sportsman Onan Huskey All Power America, 2000 2500 3000 3500 4000 4375 4650 5000 5500 6000 6500 7000 8000 8500 8750 8800 9000 9500 etc..
  • Fits many Kawasaki Kohler Briggs & Stratton small engines and Predator 212 301 420 cc Ct200u Bt200x Kt196 79cc 159cc 196cc 208cc 212cc 224cc 269cc 339cc 389cc 420cc 439cc 459cc etc..
Check Stock

Mxclimate Air Conditioner Drain Hose 20 Ft for Ductless Mini Split AC Heat Pump Systems,UV Resistant & Flexible

  • 【DURABLE MATERIAL】:This flexible drain hose is made of premium EVA and PE,anti-aging,non-toxi.not easy to deform ,durable for indoor and outdoor....
  • 【UV RESISTANT】:Build-in carbon inner layer,UV resistance.Interior grooves are smooth.Reduce blockage..
  • 【ABOUT THE SIZE】:20 ft (6m)long triple fitting 5/8 in. ID tubing with 16 mm or 18 mm connections,fits standard 5/8 in. male drain adapters..
  • 【WIDELY USE】:Fit for all Ductless Mini Split Air Conditioner and Heat Pump Systems.
  • 【EASY TO EXTEND】:At each 39 inch interval has 2 connection sockets,easy to cut for extending the length of water hose.
Check Stock

Glarks 12Pcs 63-71mm Stainless Steel T-Bolt Hose Clamps Turbo Intake Soft Hose Intercooler Clamps

  • Size: Inner Diameter: 76mm / 3"(ID), 102mm / 4"(ID).
  • Outer Diameter: 86mm / 3.39"(OD), 112mm / 4.41"(OD).
  • Length: 76mm / 3". Please check the size carefully before ordering..
  • Nice Performance: The working temperature is -60 Degree Celsius to 300 Degree Celsius..
  • Widely Application: It is a universal product, suits most automotive engine connections..
  • Good Replacement: It is a good replacement for the old or broken one. The hose improves the flow and performance of the engine cooling system..
  • Durable Material: The hose is made of silicone, durable and long service life..
Check Stock