Reviews 20db Gain - BestBuyersPro.com

Audinate Dante AVIO – Analog Input Adapter 1-Channel

It vividly and naturally recreates recordings and has a uncanny ability to compliment any turntable. The Bellari VP130 further defines its position as....
“The Bargain of a Lifetime Tube Phono Stage. For (this price), the Bellari Tube Phonostage offers warm musical sound and may be just what the doctor....
“I was surprised by how attractive and well balanced it sounded: smooth and warm, yet open and crisply detailed. The Bellari seemed to create a....
Cartridge Compatibility: Moving Magnet or High output Moving Coil Gain: 38.9 dB gain @ 1kHz with 12AX7 Tube Input Impedance: 47k ohms Output....
Equalization: RIAA +/- .9 dB, 20Hz to 20kHz THD .05% @ 1KHz S/N Ratio: 103 dB, unweighted Crosstalk: -75 dB Size: 6″w x 2.5″h x 5.4″d.

Right & Left Channel Balance Settings - Right and left output can be adjusted in order to appeal to users with different ear sensitivity..
Bass Adjustment - Independent bass adjustment function provides 20-shifting choice from -10 to +10..
Treble Adjustment - Independent treble adjustment function provides 20-shifting choice from -10 to +10..
Line Output - LO BYPASS switch can relize direct line output which should be used together with E09K or L7..
Gain Selection - Three levels of gain selection at 0Db, 6Db and 12Db..

Tube assembly: 2x ECC83 (12AX7) Input impedance variable: 10-1000 Ohms, fix 47 kOhms.
Gain: MM / MC 40 / 45 / 50 / 60 / 65 dB Output voltage: typically 500 mV/1kHz at 5mV/1kHz (at 40dB).
Signal-to-noise ratio: 88dBA THD: < 0,04%.
RIAA curve accuracy: +/- 0,2dB/20Hz - 20kHz Subsonic filter: 20Hz @ 18dB/octave Input / Output: 2x R.

Tube assembly: 2x ECC83 (12AX7) Input impedance variable: 10-1000 Ohms, fix 47 kOhms.
Gain: MM / MC 40 / 45 / 50 / 60 / 65 dB Output voltage: typically 500 mV/1kHz at 5mV/1kHz (at 40dB).
Signal-to-noise ratio: 88dBA THD: < 0,04%.
RIAA curve accuracy: +/- 0,2dB/20Hz - 20kHz Subsonic filter: 20Hz @ 18dB/octave Input / Output: 2x R.

Built in switchable Optical Limiter XLR Mic In & Pass Through Ground lift on XLR signal Stereo/Mono 1/4-in Monitor Input.
3 5mm & 1/4-in Headphone outputs Powered by one 9 volt battery or the included PS27s power supply Lots of output level it's loud Belt clip is included.
Max Input Level -20 dB XLR 40 dB monitor Input Impedance 600 Ohm Mic - 22k Ohm Monitor Output Impedance 10 Ohms Gain 20 dB 1/4-in 50 dB XLR. Bandwidth: 50 - 20 kHz (kiloHertz).
S/N Ratio 90 db Limit Threshold 0 db Current Draw 70 Mils Nominal Max Output Level 100 Mil Watts @ 16 Ohm Power 9 - 15 VDC.

Stereo Output Power: "2x5600W PEAK, 2x2800W Program, 2x1400W RMS @ 2Ω" "2x2800W PEAK, 2x1400W Program, 2x700W RMS @ 4Ω" "2x1400W PEAK, 2x700W Program, 2x350W RMS @ 8Ω".
Bridge Output Power: "5600W PEAK, 2800W Program, 1400W RMS @ 4Ω" "2800W PEAK, 1400W Program, 700W RMS @ 8Ω".
Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
Dual cooling fans / Connectors Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..

Stereo Output Power: "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @2Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @4Ω" "2x1000W PEAK, 2x500W Program, 2x250W RMS @8Ω".
Bridge Output Power: "4000W PEAK, 2000W Program, 1000W RMS @4Ω" "2000W PEAK, 1000W Program, 500W RMS @8Ω".
Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) : ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry: Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V /.
Connectors: Input: XLR input, 1/4" input: XLR Output: Speakon connector Output: Speakon, locking type socket, Banana plug connection output.
Dual cooling fans / Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit. / lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit. / Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..

...y(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 90v-250v 50Hz.
Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protection device..