Reviews 200 Psi Gate Valve

Valterra 10" PVC Gate Valve - Slip Hub Fittings with Stainless Steel Paddle

  • APPLICATIONS: Ideal for low pressure and vacuum applications as a quick shut-off valve - Can be used with air or clean, gray or waste water - See description for specific applications.
  • KEY FEATURES: Unrestricted flow - Full port - 304 Stainless Steel shaft/paddle and handle.
  • SPECIFICATIONS: Maximum Pressure 6psi Open/8psi Closed - PVC with female Slip/Hub fittings which receive 10" PVC pipe.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle can be replaced by removing C-clip.
Check Stock

Valterra 6201 PVC Gate Valve, White, 2\ Slip

  • APPLICATIONS: Ideal for quick opening and shut off in low vacuum or pressure applications - Can be used with air or clean/gray/waste water.
  • KEY FEATURES: Unrestricted flow - Full port opening - Simple push/pull operation.
  • SPECIFICATIONS: Maximum Pressure - 20 psi Open/40 psi Closed, Schedule 40 PVC Slip fittings.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle simply unscrews.
Check Stock

Valterra 7201 ABS Gate Valve, Black, 2\ Slip

  • APPLICATIONS: Ideal for quick opening and shut off in low vacuum or pressure applications - Can be used with air or clean/gray/waste water.
  • KEY FEATURES: Unrestricted flow - Full port opening - Simple push/pull operation.
  • SPECIFICATIONS: Maximum Pressure - 20 psi Open/40 psi Closed, Schedule 40 ABS Slip fittings.
  • REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle simply unscrews.
Check Stock

Viair 20001 PSI Ultra Duty Onboard Air System

  • Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI.
  • Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, 2.5 gallon air tank, relay, air tank....
  • 200 PSI maximum working pressure, 1.76 CFM at 0 PSI.
  • Can inflate a 37 Inch Tire from 0-30PSI in 7 minutes and 10 seconds..
  • One Year Manufacturer's defect warranty through manufacturer with receipt. Air tank should be used with a drain cock and pressure release valve..
Check Stock

Apex Tool Supply AB-9051114 Air Compressor Replacement Pressure Regulator For Bostitch,Husky, Hitachi and Craftsman

  • Air Compressor Pressure Control Switch 4 Ports 95-125 PSI w/ 0-200 Pressure Gauge and 150 PSI Pop off valve.
  • Brand new Air Compressor Control Valve (95-125 PSI Pressure Switch). It is comparable to a Furnas, Square D, and many more..
  • he product has an On/Off switch and a unloader. It will be working on both 2 stage and single stage compressors. If your compressor does not need the unloader, you do not have to hook it up..
  • PRESET 95-125 PSI ¼" COMPRESSION UNLOADER VALVE ¼" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1/4" PORTS. MAX AMPS, 20 AMPS AT 120VOLT / 12 AMP AT 240 VOLT , AND 9.6 AMP AT 3PH 240 VOLT.
Check Stock

LuckyHigh 2pcs Dual Welding Gas Gauges Oxygen (CGA-540) and Acetylene (CGA-510) Regulators Combo Solid Brass Gas Welder Regulator

  • Oxygen Regulator fits welding Oxygen Tanks with CGA-540 Valve.
  • Propane Regulator fits welding Propane tanks with CGA-510 valve..
  • Oxygen Outlet Pressure: 0-200 PSI,Acetylene Outlet Pressure: 0-30 PSI.
  • Oxygen Inlet: 0-4000 PSI,Acetylene Inlet: 0-400 PSI.
  • Welding Gas Gauges are made of solid brass..
Check Stock

HPDMC 6000psi Scuba Paintball Tank Refill Adapter Aluminium Alloy Fill Station

  • Scuba Refill Adapter with a 8mm quick disconnect..
  • Built for standard Scuba K-Valve, J-Valve and H-Valve..
  • Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks..
  • Made of high quality aluminium alloy, which is anti-rust and durable with gauge..
  • Filling compressed air or nitrogen to your small air tanks / paintball tanks from a larger cylinder.
Check Stock

EZ-FLO 20405LF Brass In-Line Check Valve

  • ✅DESIGN- The valve features a stainless steel to prevent water from traveling back to the source to avoid contamination..
  • ✅QUALITY- Made of from heavy-duty brass for extra durability and strength during every use..
  • ✅FUNCTIONALITY- The working pressure of the check valve is 200 PSI with a minimum of 5 PSI to open the spring..
  • ✅MEASUREMENT- The in-line check valve is equipped with a 1 inch female iron pipe (FIP) threaded connection for a maintenance free operation..
  • ✅SAFETY- The EZ-FLO in-line check valve is compliant with the Safe Drinking Water Act..
Check Stock

Scheiffer Sewer Jetter Kit - Ball Valve Hose Reel 1/4" x 200' Hose and Nozzles

  • Schieffer 1/4" x 200' 4800 PSI Thermoplastic Sewer Jetter Hose.
  • 7250 PSI High Pressure Ball Valve 3/8" Female Connectors.
  • Erie Tools Button Nose and Rotating 1/4" Sewer Jetter Drain Cleaning Nozzle 4.5 Orifice.
  • Erie Tools 5000 PSI 3/8" x 200' Portable Hose Reel.
  • Raptor Blast Brass Hex Bushing 3/8" x 1/4" Reducer.
Check Stock

3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)

  • 3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - "Lead-Free" Compliant.
Check Stock