Reviews 2 Mm Thickness

30 Pcs Stainless Steel Stud Earring Cabochon Setting Post Cup Fit for 14mm,30 Pcs Glass Cabochons,60 Pcs Earring Backs (Fit 14 mm Cabochons)

  • Cabochon setting: Internal diameter 14 mm,thickness 2 mm.
  • Glass Cabochons: diameter 14 mm, thickness 5 mm.
  • Butterfly earring backs(30 Pcs): length 6 mm, thickness 4.5 mm.
  • Clear bullet earring backs(30 Pcs): diameter 5 mm, thickness 5 mm.
Check Stock

Concrete Molds DIY Sold Set 22 Concrete MOLDS River Rock Stone Moulds Wall Veneer Stones for FIREPLACES #W05

  • 22 CONCRETE MOLDS RIVER ROCK STONE MOULDS WALL VENEER STONES FOR FIREPLACES #W05.
  • Molds are made of ABS plastic thickness 1,9-2mm. Depending on the geometry of the product wall thickness can form less than the above dimensions..
Check Stock

Rockwell Hardness Test Block-C Scale-HRC 55

  • Please note that the prices is only one pieces 4 Step 2.5mm 5mm 10mm 20mm Ultrasonic Step Test Blocks..
  • Used for thickness and linearity calibration..
  • If you need to buy other Ultrasonic Calibration Blocks,please let me know,i will help you to solve it..
Check Stock

HZXVOGEN MIG Welder 100V/220V 200Amp Weld Aluminum Wider LCD Display Smart Control IGBT Inverter MIG Stick TIG Mix Gases Gasless Flux Cored Solid Core Wire Welding Machine Model HBM2280

  • THE MOST ADVANCED MULTIFUNCTIONAL WELDER - HZXVOGEN HBM2280 MIG welder with wider LCD displayed, it is a smart control welder. It is super easy and....
  • CAN WELD ALUMINUM - This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This mig welder came with qualify accessories: MB24 Mig....
  • MIG FUNCTION - 1. MIX GAS can use 0.6/ 0.8/ 0.9/ 1.0mm flux wire. When using 0.6/ 0.8/ 0.9mm wire, it can weld 0.7 ~ 3.4mm thickness. When using 1.0mm....
  • TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten.When using 1.6mm tungsten can weld 0.7 ~ 4.8 thickness, using 2.4mm tungsten can weld 1.2 ~ 6.4mm....
  • MMA FUNCTION - Current 10 ~ 170 amp. Can weld 2.5/ 3.2/4.0mm electrode. Using 2.5/ 3.2mm rods, can weld 1.6 ~3.4mm thickness. Using 4.0mm rods, can....
Check Stock

AYUBOUSA 12x17 Inch Blank Guitar Bass Pickguard Material Scratch Plate for Fender Stratocaster Telecaster Custom, 3Ply White

  • Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice..
  • Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness..
  • 3Ply constructions made of quality celluloid and PVC plastic material..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
Check Stock

MLHpeak Invisible Hinges Hidden Hinge Concealed Hinge 180 Degree Swing Hinge 7 inch (2, Silver)

  • DIMENSION - 7 x 2.8 x 1 inch, MATERIAL – Zinc alloy embryo + aluminum alloy core.
  • EASY INSTALLATION - Three-dimensional adjustable range: vertical ± 3.0mm, horizontal ± 2.0mm and depth ± 1.0mm, do not have to remove the door can be adjusted.
  • Three-dimensional adjustable range: APPLICABLE DOOR SIZE - Door Thickness ＞ 35mm, Door Width ＜ 850mmup and down ± 3.0mm, left and right ± 2.0mm, before and after ± 1.0mm, do not have to remove the door can be adjusted.
  • APPLICABLE DOOR SIZE - Door Thickness 35mm～40mm, Door Width ＜1000mm.
  • APPLICATION - 2 hinges will support 177 lbs, Fit for wooden doors and flush doors.
Check Stock

HLMOptimo Double Action Spring Door Hinge Stainless Steel (4, 4 inch)

  • DIMENSION - 7 x 2.8 x 1 inch, MATERIAL – Zinc alloy embryo + aluminum alloy core.
  • EASY INSTALLATION - Three-dimensional adjustable range: vertical ± 3.0mm, horizontal ± 2.0mm and depth ± 1.0mm, do not have to remove the door can be adjusted.
  • APPLICABLE DOOR SIZE - Door Thickness ＞ 35mm, Door Width ＜ 850mm.
  • Three-dimensional adjustable range: APPLICABLE DOOR SIZE - Door Thickness ＞ 35mm, Door Width ＜ 850mmup and down ± 3.0mm, left and right ± 2.0mm, before and after ± 1.0mm, do not have to remove the door can be adjusted.
  • Finger protection from small gap between door and frame..
Check Stock

IKN 12 x 17 Inch Blank Guitar Pickguard Material Scratch Plate Backplate Sheet for Electric Guitar Bass Pickguard Custom, 3Ply White

  • Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice..
  • Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness..
  • Material: 3Ply constructions made of quality PVC plastic material. Color: white / black / white..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
  • Package Includes: 1pc blank pickguard material..
Check Stock

IKN 12 x 17 Inch Blank Guitar Pickguard Material Scratch Plate Backplate Sheet for Electric Guitar Bass Pickguard Custom, 4Ply Aged Pearl

  • Use this blank pickguard material sheet to cut your own guitar pickguards, enough for 2 Tele or 2 Strat or 2 Jazz Bass, 1 P-Bass of your own design and choice..
  • Dimenison: about 11"(length) x 17"(width) x 0.09"(thickness)/290mm x 435mm x 2.3mm. Thickness is about +/- 0.2mm error, because different bulks materials might be varied different thickness..
  • Material: 4Ply constructions made of quality celluloid and PVC plastic material. Color: aged pearloid / cream / black / cream..
  • There are 2 layers thin protective film on the front surface of the pickguard, peel off after installation..
  • Package Includes: 1pc blank pickguard material..
Check Stock

4 Pc 5x135 MM to 6x135 MM 5 Lug to 6 Lug 2 Piece Construction Hub Centric Conversion Wheel Spacers Adapters 2' Thick 14x2.0 Studs Works with 1997-2002 Ford F150 Adapting 03+ Ford F-150 Wheels

  • 4 Pc of 5 Lug To 6 Lug 2″ Thick Hub Centric CONVERSION Wheel Adapters. Allows you to put 6×135 MM Wheels on a 5×135 MM Vehicle..
  • Adapter Specs: Color: Raw Aluminum | Thickness: 2″ (51 MM) | Bolt Pattern: 5×135 MM | Wheel Bolt Pattern: 5×135 MM| Wheel Bore: 87 MM | Hub Bore: 87 MM | Thread Pitch: 14×2.0.
  • Each Adapter is 2 Pieces | Adapter Thickness Back Piece: 1.25″ | Adapter Thickness Front Piece: 0.75″ | Material: Aerospace 6061 T6 Forged Aluminum.
  • Bolt-On Kit With All Hardware Included. Free Thread Locker.
  • Fits Ford Vehicles With A 5×135 MM Bolt Pattern – Full Hub Centric.
Check Stock