Reviews 2 0 Inch Tft Screen

BW 3.5 Inch TFT LCD Monitor for Car / Automobile

  • Brand New and High quality. Portable 3.5.
  • Wide view angle, low illumination. D/N models with photo-sensor. Distance reference marking display. Easy installation..
  • Screen Size: 3.5 inch. Ratio: 4:3 TFT screen. Power Supply: DC 12V..
  • Visible Area: 72mm x 53mm. Power Consumption: 2W. Operating Temperature: 0°C ~ +80°C. Storage Temperature: -10°C ~ +80°C..
  • Video: 2-channel video input. Dimensions: 93 x 80 x 20mm (LxWxH)..
Check Stock

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

3.5 inch TFT LCD Display Screen, 320x240 Resolution Compatible Display Module, LCD Display Screen 54pin

  • 【HIGH QUALITY】▶RGB LCD Display Screen is 100% brand new and high quality..
  • 【DISPLAY SCREEN】▶This product is 3.5inch TFT LCD display screen, with resolution of 320RGB x 240..
  • 【COMPATIBLE】▶This TFT LCD display is compatible with LQ035NC111 54pin LCD..
  • 【THREE MODES】▶The TFT LCD screen has 3 kinds display mode: TN, Normally White, and Transmissive..
  • 【INTERFACE】▶Signal interface digital RGB (8/24-bit) + Serial Peripheral Interface, CCIR601/656 , 54 pins , FPC..
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output

  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
  • Upgrade the firmware by SD card. It is easy and convenient to....
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

Riiai 2-in-1 Digital Oscilloscope & Transistor Tester, Real-time 2.5MS/s Sampling Rate 200kHz Bandwidth, 2.4 inch TFT Color Screen, PWM Square Wave Output, Diode Voltage Continuity Tester

  • ...ned 80Khz/5.0V PWM wave test signal source with adjustable duty cycle. With a Single, Normal, Automatic trigger, it can be used for both periodic and aperiodic digital signals. Other modes include circuit continuity test, 0-16V input voltage measure, PWM output, 0-24V Zener diode measure and etc..
  • ⭐【2.4 Inch TFT Screen & 1500mah Rechargeable Battery】--- The transistor tester adopts a built-in 1500 mah battery that will get fully charged within 1-2 hours via a 5V/2A adapter and can work for 4 hours(Finish Green Indicator/Charging Red Indicator). The digital handheld pocket oscilloscope and transistor tester are designed with a high-resolution 2.4-inch TFT screen with an adjustable backlight. Better reading experience and easy to use..
  • ⭐【Multiple Interfaces & Easy to Operate】--- The pocket oscilloscope can test different functions that supports multiple interfaces screen display. With press button design, it is more convenient to operate and choose the different test function mode. Pocket size and lightweight feature provide users with more possibilities and fun in using the portable storage oscilloscope..
  • ⭐【Wide Application】--- The digital oscilloscope supports online operation with a computer that users can refresh the official firmwar....
Check Stock

BIGTREETECH SKR Mini E3 V3.0 Control Board Integrated TMC2209 UART Stepper Driver Supports Marlin/Klipper Compatible Ender 3/Ender 3 Pro/Ender 3 V2 3D Printer Motherboard ZZB000590 Black

  • ⭐【Main Control Chip】BIGTREETECH SKR Mini E3 V3.0 control board adoptes the G0 series MCU-STM32G0B1RET6 or STM32G0B0RET6 ARM Coretex. integrated TMC2209 Silent stepper motor drive,Support runing Klipper&Marlin..
  • ⭐【Heat Sink Design Upgrade】New upgraded to integrated large stepping motor driver aluminum heat sink,strengthen the drive heat dissipation capacity, and greatly improve the motherboardc heat dissipation performance..
  • ⭐【Multiple Functions】It Supports BLTouch, RGB lights,Filament detection, Automatic shutdown,power-off reesume, Display supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28/TFT43/TFT50/TFT70 V3.0 touch screen as well as original 12864 LCD of Ender 3 printer..
  • ⭐【Fan Upgraded】Increase Three CNC heat dissipation controllable fan interface to reduce the printer temperature when the device is working..
  • ⭐【Multiple Compatibile】BIGTREETECH SKR MINI E3 V3.0 Control board is design for Ender 3,plug and play,compatible with Ender V2 Ender 3/ende 3 pro/ender 5/ender 5 pro/CR-10 3D printer, the firmware is pre-install well before we ship out, you can select the firmware base on your needs..
Check Stock

2 in 1 OSOTC2 Handheld Oscilloscope Multimeter with Electronic Component Tester,2.4\ TFT Digital,Multiple Waveform Capture with Power Supply

  • ...C2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with 2.4-inch oversized color dot matrix TFT，especially suitable for fast pairing of transistors, identification of mixed，surface mount and wordless components, and preliminary screening of small batch components..
  • The oscilloscope has a real-time sampling rate of 2.5ms/s, a broadband of 200kHz, a 2.4-inch TFT high-definition color screen, a complete trigger function (single time, normal, automatic) and can measure the voltage signal up to ± 400V. It is equipped with an 80kHz / 5.0V PWM wave test signal source with adjustable duty cycle, and is equipped with a funny one button auto. The measured waveform can be displayed by simple adjustment.
  • The oscilloscope has small volume, integrated support, free contraction, can rotate 90 degrees, does not occupy space and is convenient to carry. At the same time, it has built-in 1500mah rechargeable lithium battery and polymer lithium battery cell, which can continuously supply power for 240 minutes, which is safer and more lasting.
  • The crystal detector can automatically detect the pin definition and automatically analyze the infrared code of NEC protocol, automatically iden....
Check Stock

Handheld Colorimeter Color Difference Meter with Built-in White Plate 4mm Measuring Aperture

  • ◆ Illuminating/Viewing Geometry: 8°/d.
  • ◆ Double locating: Illuminating locating and precise cross locating..
  • Built-in white plate parameters, no need to do calibration..
  • ◆ 4mm measuring aperture Widely used in food, chemical industry, electronics, automobile, food and other fields..
Check Stock

BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D Printer Parts for 1.75mm Filament SKR V1.3 Mini E3 GEN V1.4

  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening..
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used..
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C language development, low development threshold..
  • 4) Support the motherboard with the break detection interface..
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode)..
Check Stock