Reviews 1volt Transformer For Water Pumps
Aquatec 6800 series Booster pump with Transformer 115V/60Hz
- boost water supply pressure to Reverse Osmosis water systems.
- high quality Made in USA Aquatec pumps with 1/4" inlet/outlet quick connect fitting.
- Designed for 18GPD to 75GPD RO reverse osmosis water systems and other applications.
- 6800 series pump, This is an 24VAC pump comes with 115V/60hz transformer.
- Aquatec pressure switch (not included) can be added to control on/off the pump.
Check Stock1/2\ liquid tight connector 90 degree 20 pack
- Size & Quantity: 10Pack of NPT 1/2 Liquid Tight Connector..
- Material:Liquid Tight Connector are made of high quality nylon,Resistant to salt water,weak acid,alcohol,oil,grease and common solvency..
- Features:The claws and seals of excel lent design,can hold cable firmly and have a wider cable range..
- Easy to Install:They attach easy to the box and secure tightly to the flex conduit.no diassembly , just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- Widdly Used:Nice tight fit for outdoor electrical box,marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting etc..
Check StockSnowpiercer: The Complete First Season S1 (DVD)
- 【PREMIUM CONDUIT FITTINGS】- Quantity: 5PACK,Size:3/4inch, The Flexible Conduit Connector is Constructed with Resists corrosion PVC to ensure quality and service life..
- 【COMPLETE ACCESSORIES】-3/4-Inch 5PACK Electrical Conduit Connector,Each connector comes with a sealing washer and locknut.
- 【SAFETY AND STURDINESS】-Resists Corrosion, Abrasion, oil, Water, Acid, Metal Shavings, and Rough Environments.
- Outdoor, Sunlight Resistant, Direct Burial,50% Lighter Than Metallic Conduits.
- 【EFFORTLESS LNSTALLATION】-The Liquid-Tight Conduit Connector Fits is fast,NO disassembly is required and only one person can complete you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- 【WIDE APPLICATION】-O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable,HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
Check Stock1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,,UL Listed, (6 PACK) (1/2-180D)
- THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
- NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
- METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,,UL Listed, (2 PACK) (1-1/2inch 180d)
- THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
- NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
- METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check StockISPINNER 4pcs NPT 1/2\ Nonmetallic Liquid Tight Electrical Conduit Connector Fittings, UL Listed, 94V-1, Pack of 4
- HIGH QUALITY - These liquid tight conduit connector fittings are made of high quality nylon, resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Flammability rating 94V-1, temperature index 125℃..
- SIZE & QUANTITY - 4 Pack of NPT 1/2 Inch.
- EASY TO USE - Easy to install, no diassembly required, just simply push the conduit or tubing onto the ferrule, tightening the domed sealing nut..
- PACKAGE - Each connector comes standard with a O-ring and locknut..
- WIDELY APPLICATION - It can be used for machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration, transformer connection, outdoor lighting and so on..
Check StockSouthwire 58133701 3/4-in Liquid-Tight Connector,Grey
- Made in USA. Use with Sealproof straight or right angle connectors.
- can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs.
- Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
- outdoor, sunlight resistant, direct burial..
- Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting.
- Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction.
- UL Listed Underwriter's Laboratories File No. E-129973.
- UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C.
Check StockSouthwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey
- All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
- No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
- No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
- Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
- for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check StockPump, Grinder, 2 HP, 15a
- Price For: Each Pump Body Material: Cast Iron Cord Length: 25 ft. Off Point: 8 GPM of Water @ 100 Ft. of Head: 9 Shaft Seal: Silicon Carbide/Double Viton Lip Motor RPM: 3450 Max Head – Pumps: 108 ft. Manufacturers Warranty Length: 3 Yr. GPM of Water @ 60 Ft. of Head: 42 HP: 2 GPM of Water @ 5 Ft. of Head: 50 Hz: 60 Input Phase AC: 1.
- GPM of Water @ 15 Ft. of Head: 50 Max. Liquid Temp.: 140 Degrees F Max. Head: 108.0 ft. Voltage: 208/230 Amps: 15 GPM of Water @ 10 Ft. of Head: 50 Item – Grinder Pumps: Grinder Pump Item: Grinder Pump GPM of Water @ 80 Ft. of Head: 27 Base Material: Cast Iron Bearing Type: Upper and Lower Ball GPM of Water @ 35 Ft. of Head: 50 Pump RPM: 3450 GPM of Water @ 40 Ft. of Head: 48.
- GPM of Water @ 30 Ft. of Head: 50 Switch Type: Tether Impeller Material: Stainless Steel On Point: 15 Handle: Yes Housing Material: Cast iron Max. Head – Pumps: 108 ft. GPM of Water @ 45 Ft. of Head: 48 GPM of Water @ 70 Ft. of Head: 35 Min. Sump Pit Dia.: 24″ GPM of Water @ 50 Ft. of Head: 46 GPM of Water @ 25 Ft. of Head: 50 Switch Type – Pumps: Tether Impeller Material – Pumps: Stainless Steel.
- Cord Length – Pumps: 25 ft. Pump HP: 2 Height: 19-1/2″ Phase: 1 Motor Type: PSC Length: 12-1/2″ FNPT GPM of Water @ 55 Ft. of Head: 45 GPM....
Check StockHinkley 75w Transformer - Pro-Series - Low Voltage & Landscape, Stainless Steel
- USE WITH LOW VOLTAGE FIXTURES – Use the Hinkley 75 Watt Landscape Transformer to convert 120V AC to 12V AC for use with low voltage landscape lighting. Rated for indoor or outdoor use, this stainless steel landscape light transformer is X-10 compatible and UL listed.
- EASY INSTALLATION – This landscape transformer features quick and easy installation – it makes a great weekend project! A 3’ grounded line cord is included and the transformer is epoxy encapsulated with a stainless steel enclosure. 6-1/2” W x 13-1/2” H x 1” D.
- FEATURES – This landscape light transformer features voltage output taps of 12, 13, 14, 15, a fully encapsulated toroidal coil, auto reset in line primary overload protection, secondary magnetic circuit reset.
- high capacity terminal blocks and receptacles for timer and photocell.
- SUPERIOR PERFORMANCE – This low voltage landscape transformer is built for superior strength and performance. It is suitable for use in wet outside environments including in direct rain or sprinkler water so you can confidently install where needed..
Check Stock